|
|
|
|
|
|
The inclined belt conveyor GKAL-60 can be used in wide variety of applications.
Upon request it can be made in various sizes within one single day.
The GKAL-60 has an extremely rigid TorsioDur frame in monobloc quality.
As well as in standard sizes it can also be custom made for specific problem solutions.
Along the whole length of the 60 mm high frame, additional accessories can be fixed to M8 sliding blocks gliding in the grooves along the side of the frame.
In a standard configuration the GKAL-60 is equipped with a slatted belt, side guide rails and a receiving hopper with fall black flap. The slats on the belt normally are 20, 30 or 40 mm high. But special heights are also available. The distance between the slats on the belt can be freely chosen. The receiving hopper exists in a small and a big standard version. A lot more of the versatile accessories in our program can be found on the pages 45 to 52 of this brochure.
The two double supports, with which the GKAL-60 on this page is equipped, can be infinitely adjusted in height and angle. For an easy change of position, the support at the receiving end has little casters. In an alternative configuration the GKAL-60 can have a single column support with wheels. It is shown on page 11.
|
|
|
|
|
|
Elegant solution with CleanTec: GEPPERT conveyors in stainless steel
GEPPERT-Band is one of the few manufacturers in Europe offering a complete range of stainless steel conveyors. But not only that: with CleanTec, the patented hygienic technology, all the strict requirements of chemical, pharmaceutical and food industry are met or exceeded.
These superb conveyors are available within 4 to 14 days, depending on the model.
In contrast to most other stainless steel conveyors - GEPPERT-conveyors are manufactured completely out of stainless steel - including shafts and bearings.
Do you have to transport very small objects or large amounts of bulk material or even bigger piece parts ? Do you need specially small transfer diameters or do you want to integrate conveyors into existing processes ? The GEPPERT range of stainless steel conveyors offers it all. Flat belt conveyors are available in belt widths between 50 mm and 1,000 mm and with lengths between 500 mm and 12,000 mm for loads of up to 100 kg. Kinked and Z-shaped conveyors with adjustable inclination between 40 and 60° can be made in useable widths between 130 mm and 530 mm and in a total length of up to 4,000 mm for loads of up to 30 kg.
|
|
|
Applied Recovery Systems can design a variety of steel belt conveyors and steel belt conveyor systems to meet the demands of your chip processing system. Whether your metal chip processing requires a simple take away system for briquettes, or a more complex system for conveying chips and cutting oils from machine tools, Applied Recovery Systems will meet your needs.
|
|
For telescopic conveyance
BMT can be extended or contracted freely according to work requirements. This model can also be flexibly adapted to layout changes of mechanical equipment.
|
|
The Timing belt conveyor type 4210 is especially made for the transportation of parts, e.g. boxes, cardboards, crates etc.
Technical Data:
- Load Range: 0 N/m to 1000 N/m (0 kg/m to 100 kg/m)
- Speed (V): 0.05 m/s to 1 m/s (3 m/min to 60 m/min)
- Belt Centres: 300 mm to 1000 mm, in increments of 50 mm
- Conveyor Length: 1000 mm to 6000 mm in increments of 500 mm
- Timing Belt: 32 mm Wide / Pitch 10 mm
- Motor Drive: Center Drive up to 0.75 kW
3-phase, 400 V / 50 Hz or 460 V / 60 Hz ± 5%
|
|
On the basis of modular concept starting from shaped aluminum, this principle of transport allows, thanks to its compactness and its ergonomics, the interconnection between the machines and the operators in an optimum way.
2 types of motorizations without maintenance:
·With driving drums
·With external engine
Characteristics:
·4 sizes of rollers: diam 40,72,81,113
·Bandwidth: from 40 to 1112 mm
·Type of band: Smooth PVC, adhering PVC, food PVC, Polyréthane, with cleats, etc
Accessories:
·End sabers
·Fixed or adjustable banks
·Jambs
·Electrical power box
|
|
- Sheet steel Frame folded 25/10ème.
- Completion: gray painting epoxy RAL 7035
or blue 5002
- Smooth Band PVC jonctionnée without end.
- Motor bike reducer positioned under the apparatus,
casing protection
- Supply Voltage Tri 220-380V,
speed fixes 10,15,20,25 m/min
- 1 direction of operation
- Maximum loading: 60kg/m
- Feet every 3 meters
ON REQUEST
Other dimensions (width, length). Other types of conveying belts
(food, with cleats, profile of guidance). Group central of order.
Variation speed.
Elevator or chute.
ACCESSORIES:
Prewired electric box, 1 direction of walk,
1 button goes/stop, 1 emergency stop = P.U. 234 HT
|
|
The modular conveyers with belt and transport' air with friction were conceived and manufactured to extract uninterrupted waste or the parts from the cutting tools, of stamping, to evacuate the parts turned on automatic lathes, injected on thermoplastic press.
The belt conveyers are appropriate also perfectly for the sector of packing and conditioning in automatic lines.
Catalog with more than 3000 references.
On request: We are able studied and to carry out special applications according to a schedule of conditions.
|
|
|
lifting belt conveyer/chute, low and high beach allowing to go up where to go down from the products of a stage to another. working width of 300mm for 1500mm, structured conveying belt, slope 25°. Drive by motor reducer
|
|
Compact conveyor built with profiles 8 basis 40 mm, for all kinds of components
- Drive on extremity pulley
- Steel pulleys with ball bearings
- Optional stainless steel plate
Dimensions :
- Width A (mm) : 40 - 80 - 120 - 160 - 200 - 250 - 300 - 400
- Length L (mm) : 400 to 6000
* Length of profile : LP = L - 52,5
* Length of belt : Lc = (2xL+150) x 0,997
* Width of belt : A - 5 mm
* Overall length : Lh = L + 42 + 2 x thickness of belt + voltage
Gear motor :
- 230 V single-phase and 230/400 V three-phase speed (m/min) +/- 10% : 2 - 3 - 6 - 9 - 12 - 18 - 24
- 24 VDC on request
|
|
After your parts have been oriented, IDEATEC can provide
you with solutions to get the parts to the places where they
are needed :
- Linear vibratory conveyors, to transport them using vibrations.
- Conveyor belts, to accumulate them.
- Unitary or multi-position separators can separate them individually or in organized batches.
- Specially adapted ducts to convey them pneumatically.
- Manipulators to position them.
|
|
Conveyors Designed by our engineers and tested in our workshops, our belt conveyors are designed to transport baggage with a maximum mass of 60 kg.
They are used for the injection, conveying or accumulation of baggage.
Advantages
Standardisation and modularity of mechanical components,
Reliability and a high level of availability
Ease of maintenance
|
|
|
Conveyor belts are built according to customer needs. They can be supplied with various mat and chain types and materials. In painted iron, steel or aluminium extract.
|
|
Belt Conveyors
The belt conveyors are suited for horizontal or inclined handling of various types of granular products (food or others). Because of the various types of structures, they can be supplied in all kinds of lengths, with concave or flat sliding plane, with fixed or adjustable sides or with a belt vulcanised lists.
The conveyor belts by Cusinato are sturdy, modular and flexible, which is vital for achieving simple or complex configurations, with full respect for the product being handled and the reliability and overall hygiene of the installations where they will be used.
Special attention is given so that the product is kept from stagnating (with the use of effective systems for lateral containment and special hoppers, deflectors), using devices such as to make it possible to handle, without problems, a wide range of products in various sizes, also when very high capacities are handled.
|
|
|
|
|
|
Belt conveyors are the most commonly used powered transportation conveyors because they are the most versatile and the least expensive. Product is conveyed directly on the belt so both regular and irregular shaped objects, large or small, light and heavy, can be transported successfully.
HK Systems uses only the highest quality premium belting products, which reduces belt stretch and results in less maintenance for tension adjustments.
Application
Belt conveyors can be used to transport product in a straight line or through changes in elevation or direction. In certain applications they can also be used for static accumulation or cartons.
Features
* Pre-Engineered Standard Widths 12" - 36", Speeds from 60 - 300 FPM & Roller Centers 3", 6" & 9"
* HK's End Drives incorporate Built-in Take-ups which reduce components, maintenance and offers superior belt tracking
* Package spacing and orientation remains constant on transportation belt conveyors
* Drives are manufactured with minimum gaps near all pulleys to reduce safety concerns.
* Reduced maintenance & labor due to built in alignment features
* Carrying surface provides positive product location
* Handles irregular shapes and sizes
* BSSE meters product in a controlled manner
Product Line
* Roller Bed
* Slider Bed
* Incline/Decline
* Brake - Spacer Belt
* Pick Belt
* Trash Belt
* Bulk Parcel Belt
* Pop-up Wheel Diverter
|
|
Its incorporation into PRODECO, a.s. production program enables to deliver to its customers comprehensive technological units for overburden dumping, i.e. excavator - belt conveyer - overburden spreader.
At present orders concerning the supply of belt transportation conveyers with a width of 1 600 and 1 800 mm have become reality. The production range includes belt conveyors with a belt width from 1 200 to 2 250 mm.
|
|
Belt Conveyor Systems continuously transport bulk materials, excavated and crushed rock material in a clean and efficient manner over long distances, through curves and up and down via considerable inclinations. The design parameters strongly determined the climatic conditions and material properties.
Tenova TAKRAF Belt Conveyors can be stationary, shift able, enclosed, running in tunnels over long distances, mounted on sleepers, on rails and onto the tunnel roof. The belt width ranges from 1 m to 3 m, the maximum belt speed today reaches 6,1 m/s in copper mines (even 10 m/s on conveyor bridges).
Besides countless belt conveyors in lignite mines worldwide, in 2000 Tenova TAKRAF built a conveyor system with the world longest 16.8 km single conveyor , thereof 16 km inside of an inclined tunnel. Milestones in the development of conveyor systems are installed downhill overland conveyor of El Abra and the in pit and ex pit conveyors of the Escondida mine in Chile.
|
|
ESX 53
The perfect Sorter: In combination with the ESPERA Checkweigher ES 600 C the ideal solution for controlled price labeling.
|
|
HK Systems “Intralox” plastic chain conveyors are “roller-less” designed plastic full width chain conveyors, serving various applications, including transportation, merging, product singulation, turning, and transferring.
Application :
Common use of this equipment is for consistent and/or various case size applications, where product is subject to orientation challenges and/or product scarring
Features and Benefits :
Conveyor lengths engineered to minimize drive assemblies
Roller top chain allows for product orientation
Various configurations: Merging, Diverging, Singulation, Product Turning
|
|
The standard of the industry. These highly efficient heavy duty chip conveyors are engineered to elevate and transfer a broad range of tough materials.
Features and Benefits
- Steel belting is available in plain, perforated, or dimpled style in 2½, 4, 6, and 9 in. pitch
- Available in closed or open frame designs in a variety of elevating onfigurations
- Widths up to 8 ft and lengths to 600 ft are available
- Features precision die-formed hinge sections
- Heavy-duty side chain features replaceable bushings and flanged rollers
- All other components are engineered standard off the shelf for ease of maintenance
- Closed frame models come completely sealed and oil tight
|
|
|
A space saving and economical way to change product directions is the lifting table. Transver belt bends and straigth conveyors can be mounted on the lifting table in various combinations. This enables fast and easy conveyor line change over the touch of a button.
|
|
Belt conveyers for all types of loads.
Many versions and options according to the transported loads:
- of 10 with 80kg/linear meter
- drums Ø 40 (for the small loads and a low diameter of rolling up) or 60 to 89 for the heavy or bulky loads.
- motorization in shaft end for an easy maintenance, or groups central for the big lengths and the use in circuit, or by driving drum.
- bandwidths of 80mm with 900mm.
- version stainless
- all lengths on estimate.
|
|
Light-duty belt conveyors
Light-duty belt conveyors for transport of smallest unit load products. Also ideally suited for transport in machines on smallest footprint.
Also available in stainless steel.
|
|
|
Transver belt conveyors set new standards concerning hygienic aspects and convenient servicing. Fast and easy belt change, open frames for easy cleaning access and a sturdy construction for a maximum of availability in multi shift operation have been considered in the developement.
|
|
Softflow system SF07
The system SF07 is integrated into a packaging line and transfers single or double product rows from the main belt to the transversal belt via a waiting belt. It guarantees a good saturation of the wrapping machines.
|
|
|
Transver belt conveyors set new standards concerning hygienic aspects and convenient servicing. Fast and easy belt change, open frames for easy cleaning access and a sturdy construction for a maximum of availability in multi shift operation have been considered in the developement.
|
|
Adjustable and mobile.
Ribbed belt conveyor with adjustable angle of slope, 1800 version and 1200 version.
Allows to solve extraction's problems (cold shut under press) or level change for small or medium parts in metal, plastic, cardboax...
Adjustable concave curvature.
Easy maintenance : easy acces to the parts (motor at the shaft end).
High resistance of the belt : contact temperature from -10° to + 80°C.
|
|
|
|
