|
|
SCHMIDT® Toggle Presses
No 11 to 19
Force range 2.5 to 22 kN
Highest force towards the end of the
stroke. These presses are suitable for all
applications where material is being
formed (e.g. riveting).
For high side loads these presses are
available with square ram.
ManualPresses are the economical solution for short run productions. The design of these presses is the direct result of our experience in multiple applications. They carry the hallmark of quality and precision. They provide:
Flexibility
- fast and easy set up
- quick and repeatable tool changeover
Ergonomic design
- hand lever position can be varied by 360°
- left and right hand versions available
Precision alignment
- smaller than 0.05 mm (precision ram and table bores)
Maintenance free
|
|
SCHMIDT® ManualPress 305 and 307
with SCHMIDT® Press Control 3000
offer process safety in a force range of 0.4 to 4 kN
- integrated force distance monitoring for quality evaluations; 'Poka Yoke'
- patented stroke lock mechanism programmable for:
- - locking working and return stroke
- - part recognition
- - separation of NIO parts
- sensor protection
ManualPresses are the economical solution for short run productions. The design of these presses is the direct result of our experience in multiple applications. They carry the hallmark of quality and precision. They provide:
Flexibility
- fast and easy set up
- quick and repeatable tool changeover
Ergonomic design
- hand lever position can be varied by 360°
- left and right hand versions available
Precision alignment
- smaller than 0.05 mm (precision ram and table bores)
Maintenance free
|
|
ManualPresses are the economical solution for short run productions. The design of these presses is the direct result of our experience in multiple applications. They carry the hallmark of quality and precision. They provide:
Flexibility
- fast and easy set up
- quick and repeatable tool changeover
Ergonomic design
- hand lever position can be varied by 360°
- left and right hand versions available
Precision alignment
- smaller than 0.05 mm (precision ram and table bores)
Maintenance free
|
|
The AGME bench type hydraulic presses are used on operations that require greater forces and can provide an alternative if a pneumatic force is not suitable.
These machines are very versatile and can be used for marking, riveting, bush insertion, punching, etc. They are designed to be used as single machines or can be used on automatic assembly lines and provide an extremely cost effective solution to most assembly operations. They have an adjustable pressure regulator and an adjustable spindle to table height from 100 to 250 mm. A process controller provides working times, program memories and operation modes.
|
|
TOGGLE PRESSES 700 kg / 1500 kg / 2000 kg
On these articulated lever models, the maximal power is obtained attaining the Bottom Dead center of the stroke.
|
|
|
Originally designed for push broaching WDS stock a comprehensive range of Hand Presses, whatever your application whether it be broaching or pressing seals or bearings this range of presses are ideal. Full details are available on our web site or by calling +44 (0)113 290 9852
|
|
RACK PRESSES 400 kg / 600 kg
The rack and pinion main feature is providing constant linear power over the whole travel according to the applied load.
|
|
Electro-hydraulically driven Blanking Press, Model 150-50/100
For producing tensile specimens and circular blanks of ferrous and non-ferrous metals. Tensile test specimens in accordance with the specifications of various standards or conforming to individual requirements can be produced using appropriate blanking tools. The blanking stroke is initiated by two-hand controls combined with a press safety relay. A force display unit is integrated into the front panel and records the blanking forces. The blanks are discharged onto a chute and are accumulated on the left of the instrument. The blanking press is available in two versions.
|
|
SERIES MOP
The hydropneumatic presses series MOP, with manual operated approach to workpiece and use of compressed air to develop the force, results in an unique working system:
Rapid - Safe - Noiseless
This is the result of technical development that gives the TROMBOLINE versatility in operation so as to achieve high levels of efficiency in the various fields of application.
* 9 Standard versions
* 3 Models with adjustable forces
* 60 mm of stroke lenghth
* 4 hydropneumatic working strokes
|
|
|
|
|
|
Manual Toggle Presses - 2.5kN - 50kN
The 360 degree adjustable handle lever allows the most favourable lever position for each respective procedure (not 2.5kN HKP/E)
The precise and non-floating adjustable V-guide guarantees accurate working, even with tools without guidance (not 2.5kN HKP/E)
The detachable spigot clamp allows frontal loading. By means of the spigot clamp a high holding force is achieved without damage to the fixing spigot
The head of the press is guided by an H7 manufactured flat guidance
The daylight can be quickly and easily adjusted by means of a fine pitch thread operated by a crank handle (not 2.5kN HKP/E)
Table with wide T-grooved clamping surface
Extended gap and height frames can be extended further if required (not for 2.5kN HKP/E and 2.5kN HKPV)
The range of application can be substantially expanded by means of customer-specific accessory equipment
For models 8/12 kN and 8/16 kN HKPV, the pressure force can be increased from 8kN to 12kN, or from 8kN to 16kN respectively, by simply changing the bearing bolt of the toggle lever. The height of stroke is thereby reduced to ca. 25mm
By comparison our toggle presses reach there listed nominal force at the bottom dead centre with a lever operating force of 400 to 100N (4 to 10 kg)
|
|
Manual Rack and Pinion Presses 2kN - 4kN
Sturdy and easy to operate presses
Cylindrical or V-shaped ways with adjustable stop
The press is guided by an H7 machined flat guidance
The daylight can be adjusted quickly and easily
A solid clamp safeguards the exact position of the press head
Table with wide T grooved clamping surfaces
Extended throat and height frames can be supplied but only for the 4kN HZP
The range of application can be substantially expanded by means of customer-specific accessory equipment
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
