|
|
|
Positioned with vertical axes.
|
|
Model-55
Three-roller bending machine
Orient
Making of rings, arcs, spirals with specified coils step lifting of tubes and profiles by 3-roller bending method.
Abilities
- 3 rollers drive
- Control of theoretical bending
radius
- Spiral step lifting control
- Work in vertical and horizontal
position
|
|
Three driving rolls
- Pyramid style design
- Bending capacity: pipe up to 4"; angle up to 80x80 mm (3"x3")
- Hydraulic adjustment of bending roll
- Combination horizontal-vertical working position
- Mechanical positive stop for consistent repostioning
- Digital readout
|
|
Type RB profile bending machines are used when aluminium or steel profiles are to be bent to the highest levels of quality, precision and productivity. These machines have particularly high flexibility and performance.
The variable clearances on the side rollers mean that these machines can be adjusted to fit the profile perfectly in each case. This leads to a noticeable improvement in bending quality but also to significantly higher bending performance than is found with conventional bending machines.
|
|
|
|
|
|
HYDRAULIC SECTION BENDING MACHINE MCP
The three roll double pre-bending section bender DAVI MCP is a technologically advanced machine that is most effective when bending regular sections such s a flat bar (flat or on edge), rectangular bars or typical T, UPN, angles or tubes with square or rectangular sections (in addition to stainless steel tubes, brass or copper or other materials). The heavy structure and sizing together with the complete range of accessories including a hydraulic traction device which makes the MCP particularly well adapted for making beams with sections of up to 500 mm. The lateral rolls are adjusted hydraulically and independently to permit the machine to perform the pre-bending operation.
The machine can be equipped with guiding rolls to compensate the deformations that occur during the bending process. The modular rolls made in alloy steel, are mounted on large diameter shafts, on auto aligning roll bearings (pre-lubricated) to obtain a high level of performance.
|
|
| ... products without technical information |
| |
Drive-in racking is ideal for homogeneous products with low levels of turnover and a high number of pallets per article type. This system offers the highest use of available space in terms of both area and height.
Advantages:
- Maximum use of available space (85%).
- Elimination of aisles between the racking.
- Rigorous entrance and exit control.
- Drive-in racking can generally accommodate as many article types as there are loading aisles.
Two management systems are available: the drive-in system, with only one access aisle, and the drive-through system, with access to the load from both sides of the rack.
The system is frequently used in cold stores (refrigeration and freezing) which require maximum use of space for the storage of products in a controlled temperature.
Drive-in racking can also be used in construction of clad-rack buildings whose most striking feature is that they do not require the existence of a building prior to construction.
|
|
|
Same principle of high-density storage as regular drive-ins, but with upright columns produced from structural steel shapes. Unlike competitve structural racks, Ridg-U-Rak structural drive-ins can be equipped with any of the Ridg-U-Rak drive-in rail designs even Ridg-U-Rail 2000
|
|
Drive-in Racking
The special system for storing large quantities of same products. Pallets are stored at various levels on special rails. Efficient use of space where the first pallet will be taken out as the last one.
|
|
Using minimal space for access aisles and lanes, Link 51's Drive-in racking provides a high-density and very space-efficient bulk storage system.
With the first pallet into a lane being the last out, stock selectivity is restricted, but when loads are delivered and dispatched in batches, this is not a difficulty. Pallets are stored on runners in the depth of the racking and trucks enter to deposit or retrieve loads. For maximum utilisation of both cubic and floor space by providing pallet storage at up to 11 metres. Link 51's High Drive-in system has unsurpassed structural strength and stability, with single-section uprights and rails and double bolt rail fixing into each upright.
|
|
| ... products without technical information |
| |
Direct drive Dividing Apparatus TA Sk 50:
Rotational axis for dividing in machine tools or other processing machines. Due to the direct drive implemented in this machine far higher r.p.m. rates can be achieved than as with comparable worm driven devices. Work pieces can thus for instance be treated by cylindrical surface grinding. The drive is absolutely free from any play or float.
|
|
STALL TORQUE:
10 to 600 Nm
POLARITY:
12, 24, 30 poles
RATED SPEED:
200 - 300 - 400 - 500 - 1000
INSULATION CLASS:
F
DEGREE OF PROTECTION:
IP65
MOUNTING:
IM B5
MAIN FEATURES:
high torque density and high performance
CE certification
cURus certification
OPTIONS:
feedback by encoder/resolver (Heidenain, Stegmann, Tamagawa)
hollow shaft
frameless
water cooled
|
|
H-modyn: Individual drive solutions for application and industry sector-specific customer requirements
The H-modyn machines for induction motors, synchronous motors and generators are suitable for use in the whole of the process industry. Either Oil & Gas, Offshore, Chemical, Steel, Water or Wastewater, Air separation, Pulp & Paper, or others - every branch will find the right machine.
In these industry sectors, with a high power requirement, these machines are preferably used for the following applications:
* Compressors
* Pumps
* Generators
* Refiners
* Blowers
and more
|
|
HT-direct motors are permanent-magnet synchronous motors that can provide high torques at low speeds directly at the driven machine. High efficiencies and good power factors can also be achieved at low speeds as a result of the permanent magnet rotors.
The HT-direct motors are offered as a harmonized system together with SINAMICS drive converters.
The HT-direct motor / SINAMICS drive converter represents a drive solution with a long service lifetime but with low lifecycle costs and high efficiency for applications with low operating speeds.
|
|
| ... products without technical information |
| |
The muscle behind the motion.
Rugged, robust and reliable, hydraulic motors from Hägglunds can be used just about anywhere on land or at sea. From the bitter cold of Siberia to the blistering heat of Africa, they withstand the challenges of any environment and any type of industry.
Likewise, our motors can drive any application, from small winches to the largest bucket wheel reclaimers. Our broad range of motors covers the whole spectrum of needs, providing either shaft or housing rotation and handling everything from 5000 to 1 400 000 Nm.
|
|
Proving that size matters.
Hägglunds’ Marathon motor is a giant – not only when it comes to size, but also when it comes to performance. By far the largest hydraulic motor in the world, Marathon is specially engineered for extreme, high-torque applications.
Despite its heavy-duty design and intimidating size, the Marathon motor offers excellent controllability and resistance to shock loads. As a result, it lets you handle large, dusty, corrosive and explosive applications with unexpected finesse. Even in extreme heat or freezing cold, a Marathon drive provides years of reliable service.
|
|
The muscle behind the motion.
Rugged, robust and reliable, hydraulic motors from Hägglunds can be used just about anywhere on land or at sea. From the bitter cold of Siberia to the blistering heat of Africa, they withstand the challenges of any environment and any type of industry.
Likewise, our motors can drive any application, from small winches to the largest bucket wheel reclaimers. Our broad range of motors covers the whole spectrum of needs, providing either shaft or housing rotation and handling everything from 5000 to 1 400 000 Nm.
|
|
Mounting size: 60mm, 80mm and 90mm
Output power: 20, 40 and 90W
Speed range: 100 - 2000r/min
Max. permissible torque: up to 68Nm
Gearheads: 8 different gear ratios of 1:5 - 1:200
Power supply: 200-230V AC
Marking: CE, UL and cUL
Constant torque over the whole speed range.
Available types: Round shaft type, parallel shaft gear type, flat gear type.
|
|
FAST-BACK 75 ® (& size 100) (New)
Brushless drive+motor, all-in-one fully digital. Torque range from 1.1 to 7.5 Nm. 220 VAC power supply. Motion controller with CAN BUS fieldbus interface.
Integrated motor in a fashionable design. The decentralized structure gives you much more freedom in designing your machine’s installation layout. Commissioning and service are much simpler. Many advantages such as cables and control cabinet space reduction. EMC line filter suppression and dumping circuit are integrated.
|
|
|
The megatorque motor ps series delivers unprecedented performance , including a maximum rotational speed of 10 and position sensor
|
|
The TORQUECHAMPION® direct drive system is the new highly dynamic drive system from LTi DRiVES for precise, fast and maintenance-free positioning.
* Its short length and lack of gearing means it takes up a minimal amount of space.
* The peak torque of the MIC motor is available up to the maximum speed, making positioning faster.
* The hollow shaft permits simple feed-through of cables, hoses or laser beams through the motor.
* The integrated measurement system with 8,388,608 increments per revolution and single-turn absolute information means no reference running is required.
* The MTC motor is an external-rotor motor. It can be coupled with a high degree of torsional rigidity without gearing directly to the mechanism. This means it has no gear play and suffers no wear, needs to maintenance and offers very high drive dynamics.
|
|
|
|
see the results for the following category : 
