A bevel gear reducer uses a conical gear for speed reduction in angular transmission between two non-parallel axes, often sitting at a right angle. These parts may be called angular members in the case of a 1:1 ratio.
Bevel gears are used in secondary drive systems (differentials), where the teeth are helical. In such cases, they also are called spiral bevel gears. Bevel gears can be found in overhead camshafts, as well.
Choice will depend on input shaft speed and torque, and output shaft speed and torque. These data will determine gear ratio. The angle between the two shafts must also be considered.
Onvio's new SL series gearbox provides an economical 1:1 spiral bevel gearbox for applications that require high speed motion directly to the load in tight ...
Onvio's FL series gearbox is perfect for high dynamic belting applications that put a heavy radial load on the gearbox. Onvio has combined our SL bevel gearbox with our PL flanged gearbox to ...
X Series: Helical and helical-bevel gear unit (up to 475 kNm)
X series
Robust and universal gear unit series which can be optimally adjusted to the task due to finely stepped torque ratings. The universal modular system ...
The low backlash BSF helical-bevel servo gear units are designed for the 40 to 1500 Nm (350 to 13200 lb-in) torque classes. The permitted acceleration torques are significantly higher than these values.
These right-angle servo gear units are available ...
R Series - Bevel gearboxes
High versatility
4 sizes with three different configurations and many ...
GENERAL DESCRIPTION
The design has been carried out on the computer, by using modern and sophisticated programs of dimensional check, strength calculation of gears, life calculation of bearings and shafts, and structural strength of the unit.
The construction has ...
The Series G helical parallel shaft and bevel helical right angle drive industrial gearbox have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market. Innovative modular design technology has minimized manufactured part count to maximize availability of product.
Product Specification:
Gear tooth ...
T series spiral bevel gearbox overview:
- T series spiral bevel gearbox with various types are standardized. Average efficiency is 98%.
- There are one input shaft, two input shafts, unilateral output shaft and double ...
Right-Angle Gearboxes
Ratings ...
Bevel gear units are designed for operation under extreme strain. Spiral teeth, hardened ...
Bevel gear drives
* Shims are unnecessary
* Bearing preload and endplay are predetermined ...
They are manufactured in 1, 2, 3 reduction steps, for input power from 0,8 kW up to approx. 2300 kW. The available ...
Cubical form housing for symmetry.
Gear ratios 1:1, 1.5:1 and 2:1.
8 different sizes for maximum output torque ranging from 17 Nm to 3550 Nm.
Fully machined with ...
DESCRIPTION:
Special bevel gear unit.
SIZE AND WEIGHT:
266 x 287 x 280 mm - Weight = 80 kg
TECHNICAL ...
Helical bevel gears up to 80 Nm
Fed up of compromises or expensive customized gear motor solutions? Have a look at HeiDrive ...
Features & Benefits
Corrosion resistant aluminum and cast iron housings are line bored for precise gear and bearing alignment
Carburized, lapped and matched AGMA rated ...
Series H InLine industrial gearboxes are available in in-line and right angle versions in single, double, triple and quadruple reduction gear stages.
The modular design and construction ...
HC Series
State of the art heavy duty helical and bevel/helical units using casehardened and ground gears throughout, 16 sizes with capabilities up to 11,000 kW.
* Heavy duty design for high torque applications
* Variety of unit types enables flexibility in design mounting
* Wide ratio range gives speeds to match design demands
...
Bevel Gear Redirector
Torque Range
Up to 1000N.m
Input Power Rating
0. 12...96 KW
Ratios ...
Right Angle Miter Gearbox Standard Features
Ideal for when power transfer with right-angle motion is required.
Dimensions: right angle miter gear drive is 3-21/32" x 3-15/16" x 1-1/4" deep
40% glass filled polypropylene
Weight: ...
K...13 range
5 sizes K 0,5.13 to KV 60.13
Max. output torque up to 700 Nm
Ratios ...
KA and KV range
9 sizes KA 1 to KA 35 and KV 90 to KV 550
Max. output torque up to 8500 Nm
Ratios 1:1, 1,5:1, 2:1, 3:1, 4:1 5:1 and 6:1
* Hardened, paired, lapped helical tooth ...
NORMA range
4 sizes NM0 to NM3
Max. output torque up to 40 Nm
Ratios 1:1
* Shaft height adjustment ...
CHT-RB and CHT-RP right-angle drives are designed for industrial applications where rotary power must be transferred between two ...
SPN bevel-gear units are developed and produced to meet the most stringent requirements, but still be cost-effective. They are:
universally applicable
easy to install and adaptable
designed for ...
The BP Riduttori angle gear boxes have an high power size ratio and a very low noise working. The mainly ...
Thanks its long experience and the last ...
- Higher output torque rating by using spiral bevel gear design. 30% more than straight bevel gear.
- Allows input speeds up to 8 times than with straight bevel gearing.
- ...
Cast iron gearbox.
Spiral bevel gears with cemented cutting, tempered, proven, rectified and ...
Cast iron gearbox.
Spiral bevel gears with cemented cutting, tempered, proven, rectified and paired.
Great power transmission, reduced ...
Mitre gear MS-HY-X? -- The alternative to the worm gear --
Size X22 - X63
Engine size: ...
