|
|
- TECRIVETbasic
Standard Blind Rivets
- TECRIVETspecial
Blind Rivets Specials
* TECRIVETpeel
Peel Rivet
* TECRIVETtriform
Trifrom Blind Rivets
* TECDRIVE
Hammerdrive Rivets
- TECRIVETmulti
Multigrip Rivets
- TECRIVETseal
Sealed Rivets
- TECLOCK / TECBULB
High Strength Rivets
|
|
• Huck BOM
-Very high strength/diameter ratio – can be used in demanding structural applications as an
alternative to threaded fasteners or welding
-Very high joint tightness when compared to conventional blind fasteners
-Very resistant to tampering, extremely hard to remove
-Excellent gap closure capability
-Large blind side footprint – ideal for lower strength or thin sheet joint materials
-Headstyles - Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm
|
|
• Huck Auto-Bulb
-Purpose design blind side shape for easy hole locating - ideal for automated assembly
-Large blind side footprint – ideal for lower strength or thin sheet joint materials
-Good blind side clearance – less space required on the blind side prior to installation
-High pin retention prevents possibility of noise/vibration in dynamic assemblies
-Recessed pinbreak – No catching on clothes, skin or goods
-Structural fastener – high shear & tensile strength
-Headstyles -Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm
|
|
• Huck Magna-Bulb
-Extra large blind side footprint – ideal for lower strength or thin sheet joint materials
-Structural fastener – Very high shear strength and high tensile strength.
-Flush pinbreak – No catching on clothes, skin or goods. Quick and easy visual inspection
-Internal pin locking mechanism – Secure within the rivet body and protected from corrosion
-Headstyles - Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm, 7.9mm
|
|
• Huck Magna-Lok
-Wide grip range – Accommodates a large variation in joint thicknesses
-Structural fastener - high shear & tensile strength
-Excellent gap closure capability
-Outstanding hole filling on the blind side – Excellent joint tightness and very resistant to
water ingress.
-Flush pinbreak – No catching on clothes, skin or goods. Quick and easy visual inspection
-Internal pin locking mechanism – Secure within the rivet body and protected from corrosion
-Headstyles - Protuding, truss, countersunk
-Materials - Steel, stainless steel, aluminium
-Diameters - 4.8mm, 6.4mm, 9.5mm
|
|
Our range of blind rivets includes several hundred standard articles.
Special rivets manufactured according to drawings are supplied on request. Aluminium, copper, steel and stainless alloys products with anodized and painted surface treatments, are available in different packages suitable for every use.
For 50 years we have been producing blind rivets in different types of materials and dimensions for more than 2000 items, from common-use rivets to those designed for more specific applications, as well as those produced customer's drawing.
Our production is completely manufactured and controlled in every aspect in our plants in Bologna.
This choice has enabled us to guarantee personally our quality and our service that have always characterized the FAR brand range of products.
|
|
|
Standard blind rivets allow to realize blind fastening, working from one side only. They are produced in several lengths and diameters, they are available with dome, large, countersunk head and they can be made in aluminium, steel, stainless steel, copper, for every kind of applications. The range of our rivets also includes blind rivets dedicated to fastening of non metallic sheets or dedicated to be used in electronics.
|
|
• Huck HuckLok
-Wide grip range – Accommodates a large variation in joint thicknesses
-Structural fastener - high shear & tensile strength
-Large blind side footprint – ideal for lower strength or thin sheet joint materials
-Flush pinbreak – No catching on clothes, skin or goods. Quick and easy visual inspection
-Internal pin locking mechanism – Secure within the rivet body and protected from corrosion, plus additional blind side pin locking for increased fatigue life
-Headstyles - Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm
|
|
Alu/Steel Standard
Alu/Steel Countersunk
Alu/Steel Large Flange
Alu/Stainless Steel Standard
Alu/Stainless Steel Large Flange
Alu/Alu Standard
Alu/Alu Large Flange
Steel/Steel Standard
Steel/Steel Countersunk
A2-Stainless Steel Standard
A2 Stainless Steel Countersunk
A4-Stainless Steel Standard
A2 Stinox Standard
Cooper/Steel Standard
Cooper/Bronze Standard
Painted Alu/Steel Standard
Anodized Alu/Steel Standard
Anodized Alu/Stainless Steel Standard
Grooved Alu/Steel Standard
Steel/Steel Winding
Plastic Standard
Peel-Alu/Steel Standard
Profile Clinching Alu/Steel
|
|
|
Blind Rivets are multi-piece rivet assemblies, capable of being installed from one side of the workpiece. Traditionally, blind rivets were used on aircraft leading edges, trailing edges, and close out areas which are limited to access to one side of the structure. Current blind rivet usage has expanded to many additional areas of the aircraft in an effort to decrease labor expense and to address the ergonomic issues of solid riveting.
|
|
Avdel® brand rivets and rivet-type fasteners are known worldwide for high performance and reliability. Handtools and modular assembly systems are available for all products.
Avdel® Speed Fastening® Systems
This unique system uses either magazine- or bowl-fed fasteners and a wide selection of installation equipment to provide rapid, reliable assembly of many materials, including PCBs and thin metal.
|
|
|
The use of rivets to tear by now is diffused in all the fields where execute jobs that involve operations of implantation and assemblage of two or more elements. The employment validity derives from the semplicità and rapidity of application. The convenience but depends above all on the quality of rivetto and from the efficenza of the rivettatrice that executes it rests it in work. Rivetti from distributed we they are of optimal quality since they come constructed with the best raw materials, with mechanical procedures appropriates to you and are systematically subordinates to tests in order to control the uniformità of the tear point, the regularisation of the serration and the perfect .
|
|
| ... products without technical information |
| |
... see all the products in the category
Rivets
|
 see the results for the following category : Inserts |
|
|
