|
|
|
|
|
|
Multi Stage Fans
Quiet running and maintenance-free operation are the key benefits of ACI Multistage Blowers. They are direct driven units and are ideal for many higher pressure applications.
Direct mounting of the impellers together with low motor speeds result in minimal noise levels as well as high pressure performance. In addition, the Multi Stage’s modular system design offers a wide choice in the number of stages and power supply possibilities. Flow rates are up to 850M³/Hr (500CFM) and pressures range up to 150 mBAR (60 In.Swg)
The Multi Stage also has a unique simple airflow shut-off feature. With side-channel blowers an additional pressure-relief valve would be required in order to avoid motor burn out. This is not only an added expense to the system, but also creates further noise pollution.
- Available in single or three phase, DC, 400Hz, and ATEX versions.
- Comprehensive range of accessories is available, including hoses and filters.
- Volume or specialised bespoke available.
- Full design and testing facilities, including airflow and noise testing.
|
|
TB-350X3T
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
|
MI-CO find many uses and among the other we mention: landfill biogas treatment, gas processing environments Atex, pneumatical cleaning, pneumatical transports, pneumatical sample and post, agitation of liquids, moving of liquids with air jets, screens of air, tunnels ventilation, air handening, cooling, driving, blowing in the cupola, heat exchangers, alimentation of gas under strong pressure, gas burners, booster of gas line, gas welding under pressure, naphtha burners, trial of combustion engine, removing of chip and slag, spraying system, intake under strong depression for feeding sucker and similar, blowing and intake in the typographic machines.
|
|
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
Radial blowers achieve high delivery volumes with very little pulsation. The frequency inverter integrated on the motor provides the capability of matching volumetric flow exactly to customer requirements. Accessories, such as intake filter or suction sound absorber, are available as optional extras.
|
|
Regenerative Blower Product Lines
AMETEK Rotron designs and manufactures an assortment of regenerative blowers for industrial, environmental, instrumentation, and chemical processing applications. These oil-free products feature compact construction, low acoustical noise, highly reliability, and long lives without scheduled maintenance requirements, providing you with high air pressures/vacuums and the best warranty in the business.
|
|
Blowers are used in a wide variety of industries:
- food industry
- chemical industry
- pharmaceutical industry
- aviation
- machine manufacturers (OEM)
- treatment of polluted water
- ...
Our range of blowers and vacuum pumps consists of hundred of variants, both belt driven and direct driven. We also carry gasproof pumps to transport gasses (other than air).
You can also select attachments that further enhance the functioning of the blowers and the pumps:
- suction filters
- cartridge filters
- safety valves
- back pressure valves
- ...
The air flow inverters make it possible to change the air flow in the main channel, or to change the channel in which the air flow is sent.
|
|
Using "multi-stage" compression, side channel blowers generate low-pulsation blast air. Perfected impeller design with curved blades guarantees optimum efficiency. Separation Of the compression chambers on both sides of the impeller permits single-stage, twin-flow as well as two-stage, single-flow operation with only one impeller. Intake filter and pressure safety valve can be integrated as an optional extra in the patented design of the sound absorbers. The sound absorbers can be varied in length, affording flexible adjustment to available installation space.
|
|
SD range
-All blower parts made of cast aluminium
-Non-contact and oil-free rotating impellers
-Silencers on inlet and outlet side with base plate as standard
-Maintenance-free and performance-adapted squirrel cage rotor motors to IP 54.
Various accessories as connectors, welding and threaded flanges, fine filters, pressure and vacuum relief valves and supplementary silencers are available.
Reversing units “Reversierautomat” for quick reversal of the air flow from vacuum to pressure operation, with or without neutral position, without reversing the direction of motor rotation.
-> Model range without motor available
-> Model range for frequency converter available
|
|
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
Northland offers some of the highest quality vacuum motors on the market,
our Universal (120 - 240 VAC Input) motors based on our popular Round K,
Square K, and B-style laminations. These cost effective blowers typically
include customer specific lead terminations, and mounting details.
|
|
A wide range of special side channel blowers is offered for transport of explosive or
corrosive gases with gas tight versions. For use of air in explosive zones a variety of blowers with Ex motors are available. ATEX conforming blowers are supplied with the required certificates. For applications with corrosive gases a range of protective coatings can be used, which are applied to the internal parts of the blower. Characteristics of gases often differ from air and influence the performance of the blowers.
We suggest to consult us for the choice of a matching blower for your process.
The following information will be needed for the selection:
- absolute pressure at inlet
- absolute pressure at outlet or differential pressure
- temperature of the gas at inlet
- nature of the gas
- mass weight of the gas
- application zone according to ATEX
Your inquiries are welcome.
|
|
|
|
|
|
Dutair remote drive side channel blowers are high pressure blowers equipped with a bare shaft and used in combination with a v-belt or coupling drive. They are an excellent solution for mobile applications because these remote drive side channel blowers can be driven by electric motors, hydraulic motors, pneumatic motors and combustible engines. Moreover, the rotation speed of Dutair remote drive side channel blowers can be increased to 4500 rev/min to raise the performance. By choosing the matching rotation speed the flow and pressure can be optimized for your process.
Dutair remote drive side channel blowers can be used for applications without electricity as power supply. Examples like material transport, vacuum lifting or mist generation show how remote drive side channel blowers can be applied as mobile use. Also in cases where only direct current is available and DC-motors have to be used the remote drive side channel blower is the best answer.
Sjerp & Jongeneel presents a program with single and double impeller versions of the Dutair remote drive side channel blower. Feel free to contact us as we will be glad to advise you about your application.
|
|
Side channel blowers for common use as blower or vacuum pump for non-corrosive and non-flammable gases. Packaging, pneumatic transport, aspiration, blowing-off, dust cleaning, vacuum tables and water treatment are some examples of applications where these blowers are used.
They are exceptionally suitable for continuous industrial use.
|
|
A complete line of crossflow/tangential and centrifugal blowers and induced draft combustion blowers is available from 20 cubic feet per minute (CFM) airflow to over 1200 CFM. These are typically used for electronic cooling, exhaust blowers, wood stoves, fireplace inserts and draft inducers.
In addition axial and radial flow fans for our subfractional C-Frame motors are available. The typical applications for these are refrigerators, duct air boosters, convection ovens and dishwashers.
|
|
|
Blowers are manufactured using Induction Motors. These motors range from sizes 18 (1.75" diameter) to 44 (4.38" diameter). Custom units are also available.
|
|
The Vortex Blower can be utilised for both vacuum and postive pressure, being capable of meeting small airflow-high pressure requirements.
Small, lightweight and economical.
High efficiency impeller and strong constructions for prevention of dust.
Compact size /higher static pressure and lower noise /high efficiency.
Open structure of vanes to prevent absorption of dust from atmosphere, providing high efficiency of pressure.
|
|
Whirlpool blower for discontinual use. Includes dead reliable single phase high performance tangential brush motor.
Manufactured with temperature control and II CE IPX 5 protection. Optional 300 W air heating. Top quality insulation, which guarantees low sound level.
|
|
|
JetAir Technologies has a complete line of direct drive blowers and air knife systems for pressure applications to 120" H2O [300mBar], vacuum to 100" H2O [250mBar] and flows to 1250cfm [2125 M3Hr].
|
|
|
|
|
|
Totally Hydraulic Drive System
The SERIES 700 features a totally hydraulic drive system providing power to the blower, feeder and hopper. The new variable speed blower control allows the operator to control air volume while maintaining a constant delivery pressure. With Meyer's hydraulic design, there are no more clutches, transmissions and the associated chains, belts and pulleys. Our innovative design simplifies installation, providing exceptional operating performance and reliability while requiring minimal maintenance.
Quick-Change Seal Strip System - Simplified Operation - Minimized Downtime
Smart engineering simplifies operation, minimizes downtime and delivers accurate and uniform coverage. Meyer's exclusive quick-change seal strip system lets you replace seal strips in the feeder in minutes. The infinitely adjustable hopper speed control provides precise control of hopper conditioning speed, and the electrically operated material slide gate is panel mounted for easy adjustment. All gauges and controls are easily accessible without having to remove protective safety guards.
|
|
Insulation Blower - SERIES 600 with New 3G Technology - Big Machine Performance In A Simple and Economical Package
The New third generation Series 600 Blowing Machine is specifically designed for the mid-sized contractor. Use it as your primary machine, a backup, or to expand your retro-fit business. With the Series 600 you can depend on fast and accurate open blow, sidewall or netted cavity work. Capable of blowing all types of loose fille materials such as cellulose, fiberglass and rockwool.
Simplified Design - Contractor Proven Platform
The SERIES 600 3G is built on the same platform as Meyer's larger blowing machines and is packed with many new features:
* New airlock design provides higher production
* Convenielty located air bleed system reduces noise levels
* Rugged drive train with improved durability
* Emergency stop for operator safety
|
|
|
Blower Packages from Tuthill Vacuum & Blower Systems combine our M-D Pneumatics Blowers into integrated systems to provide air and gas handling for most any application
|
|
CX, TB, HTB, PF, and PB series
All blowers use IEC standard motors. Suitable for long time operation. High air pressure, large airflow, suitable for all kind of cooling, drying, and transporting applications.
Most of TB, PF and PB blowers have three different air outlet directions.
CX and PF series also have heat-resistant type, for high air temperature applications.
HTB series also have belt type, for higher air pressure applications.
- Selling without motor is available for 2HP and above, except HTB series.
- Selling individually is available for all blower parts.
- Additional Damper, filter and Silencer are available for CX, TB, and HTB series.
|
|
Paxton's design is compact and efficient. Centrifugal Blowers weigh less than 30 lbs. without motor, and deliver air flows to 1,200 cfm, pressure to 100" H2O, and vacuum to 100" H2O (g) for true high performance. Competing blowers are unable to match Paxton's efficiency. To achieve comparable output, the less efficient competing blowers require 10-25% higher rpm. This means substantially higher wear, maintenance, energy consumption, noise and overall cost compared to Paxton.
High performance and efficiencies
Compact centrifugal blower design
Unparalleled 3-year warranty program
8,000 hour durability testing
100% performance and vibration testing
Available in anti-corrosive and special coatings
for a full range of "extreme condition" applications
|
|
As market leaders since 1983, SANTONI strives to create new standards of technology in air and gas handling technology through in-house R&D. Product up gradation together with development of engineering skills in the specialized fields of technology has ensured SANTONI's continued growth and success.
Drawing from its in-depth experience with industry SANTONI has been able to offer a wide range of standard and custom-built centrifugal blowers in MS, SS, FRP and other materials.
Our range of fans - both centrifugal and axial-flow, is the largest available in India, and are useful for a wide range of applications, such as the following:
- Industrial Ventilation
- Industrial Pneumatic Conveying
- Industrial Dust Collection
- Industrial Drying
- Industrial Vacuum Cleaning Systems
- Fly Ash Handling
- Industrial Air Handling Units
- Industrial Furnaces
- Industrial Cooling & Refrigeration Systems
|
|
MB Series Centrifugal Blowers (15)
Centrifugal blowers move air by means of the centrifugal force generated by rotating a cylindrical runner on which blades have been arranged. Centrifugal blowers have a small outlet, which concentrates air in a single direction, and are therefore suitable for local cooling. They also create large static pressure, making them optimal for cooling equipment through which air cannot flow easily and for airflow through ducts.
- AC Input
MBD Series Centrifugal Blowers (11)
Centrifugal blowers move air by means of the centrifugal force generated by rotating a cylindrical runner on which blades have been arranged. Centrifugal blowers have a small outlet, which concentrates air in a single direction, and are therefore suitable for local cooling. They also create large static pressure, making them optimal for cooling equipment through which air cannot flow easily and for airflow through ducts.
- DC Input
|
|
|
Blowers rotate fans to cool the inside of office automation equipment by directing heat outside. These motors have more high power to cool than normal type of fan motor.
|
|
|
|
|
|
Insulation Blower - SERIES 1400 - The Industry's Fastest High-Volume Blower
For open blow production Meyer's top of the line all-fiber, large capacity SERIES 1400 delivers unmatched performance and unparalleled accuracy.
Want to do more jobs per day or complete big jobs faster? The SERIES 1400 solves your production challenges by integrating:
* An oversized hopper
* Generous 5 bag holding capacity
* The industry's largest available blower
* 4" diameter hose size
Quick-Change Seal Strip System - Simplified Operation - Minimized Downtime
Smart engineering simplifies operation, minimizes downtime and delivers accurate and uniform coverage. Meyer's exclusive quick-change seal strip system lets you replace seal strips in the feeder in minutes. A 4-speed transmission provides flexible hopper speed control, and the electrically operated material slide gate is panel mounted for easy adjustment. All gauges and controls are easily accessible without having to remove protective safety guards.
Insulation blowing professionals can choose from a complete range of drive options to suit specific needs and preferences including:
* Mechanical power-take-off
* Water cooled gas or diesel engines
|
|
Insulation Blower - SERIES 500 with New 3G Technology - Compact, Economical, Profitable!
The New Series 500 with 3G technology is a step-up to a contractor level blowing machine. Use it as your start-up machine, a backup, or to expand your retro-fit business.
Simplified Design - Contractor Proven Platform
The Series 500 is capable of blowing types of loose fill materials such as cellulose, fiberglass and rockwool. No other insulation blower provides this level of performance, reliability and versatility in an affordable machine. The Series 500 Features:
* Heavy Duty agitator for consistent processing
* Easy engine access
* Rugged drive train
* Emergency stop for operator safety
* Easy access for airlock seal maintenance
|
|
DESCRIPTION: Single Stage, High-Speed Centrifugal Compressor, Oil-Less, Spindless Design.
DRIVE SYSTEM: DirectDrive™ Technology (Patent Pending), Impeller directly coupled to Motor Shaft with Variable Speed Frequency Drive Control. Integrated Motor Protection, Maximum Air Inlet Temperature: 150ºF [60ºC]
CONSTRUCTION: A356-T6 Alluminum, 79lbs. [36kg]
HIGH-SPEED MOTOR: TEFC, IP54, External Junction Box, 15/20HP [11/15kW] 3-Phase, 190-600VAC, 50/60Hz, 105ºF [40ºC] Ambient.
VARIABLE FREQUENCY DRIVE: IP20 (IP66 Availabl dame), 15/20HP [11/15kW] 3-PMI/RFI Electrical Filter, Digital & Analog I/O, Network Communication.
|
|
... see all the products in the category
Blowers
|
|
|
