|
|
|
Plastics attract dust due to static electricity. The dust particles stick firmly to the surface, which makes it difficult to remove them. Due to their configuration, numerous plastic products have to be neutralised from a distance. For this purpose, SIMCO has developed ionising air blowers. The emitter points of the anti-static bar ionize the air which is blown towards the electrostatically charged object. The part is then neutralised by the ionized flow.
|
|
|
Aerzen High-Pressure Blowers are equipped with a compression-proof housing (PN 25). Driving shaft and conveying chamber sealed by various sealing combinations. Direction of flow vertical to the bottom. Drive via direct coupling with motor or via flexibly coupled spur gear.
|
|
If high air pressure is required, AIRPACK is the right answer. With high static pressure of up to 24 kPa at 50 Hz and 28 kPa at 60 Hz, the AIRPACK high-pressure blower offers unbelievable performance. With the appropriate accessories, several Leister air heaters can be supplied.
• High pressure
• Sound-suppressed
• Continuous operation
• Can be fitted in every position
• Air-inlet and outlet adapter can be mounted on both sides of the turbine
|
|
The name says it: with 61 dB(A), the SILENCE blower is a pussyfooter – and offers very respectable performance. Along with all Leister blowers it is well known for its dependability.
• Low noise emission
• High air flow
• Continuous operation
• Can be fitted in every position
|
|
|
Housing compression-proof for PN 2,5/PN 6. Cylinder with noise reducing chamber on the discharge side, housing with connections for injection- and water flushing, as well as for lubrication - and purge oil supply systems. Conveying chamber by single-acting oil-purged mechanical seals in combination with labyrinth seals sealed on the shaft. Direction of flow horizontal/vertical (depending on size). Drive directly via coupling or flexible spur gear (depending on size).
|
|
General description
Application
These fans are designed especially for local ventilation. They are installed on wall brackets inside the rooms. Ability to over-come signi! cant " ow resistances makes them especially useful in installation with local exhausts.
Structure
It consists of a spiral steel housing, motor with a radial impeller mounted on its shaft. The fan inlet is equipped with a " ange, to install it on the wall bracket or ! ltering unit. It is recommended to install silencers type TK at the fan inlet and outlet.
|
|
The air-flow giant in the Leister blower program. At 50 Hz the air output is 13 500 l/min and 15 900 l/min at 60 Hz.
With the appropriate accessories, it supplies one or more
Leister air heaters.
• High air flow
• Robust
• Continuous operation
• Can be fitted in every position
|
|
|
Patented 3-lobe positive displacement blowers type GM. Blowers with 3-lobe pistons and two patented pre-inlet channels for pulsation reduction. The conveying chamber is sealed by 4 piston ring labyrinth seals. The driving shaft can be sealed gastightly. Vertical direction of flow. Drive via narrow V-belts or directly onto the driving shaft.
|
|
Versatile and operable at high ambient temperature up to 60°C. Despite its small dimensions, ROBUST is a real powerhouse. It offers great flexibility thanks to its extensive range of accessories.
• Compact construction – high performance
• Sound-suppressed
• Continuous operation
• Can be fitted in every position
|
|
|
Housing flanges with O-ring-seals, vacuum-tight. Lube oil supply is effected by splash lubrication. Shaft seals by combined oil slinger-piston ring labyrinth seals. The driving shaft is sealed by double radial seal rings with grease barrier. Direction of flow vertical from top to bottom or horizontal clockwise (when looking on the driving shaft.) The direction of flow depends on the size.
|
|
|
Pedro Gil, S.L. is a manufacturer company for pressure and vacuum groups, root pumps and vacuum systems.
|
|
|
Pedro Gil, S.L. is a manufacturer company for pressure and vacuum groups, root pumps and vacuum systems.
|
|
Blower Selection ...
is made easy with the wide variety of products available from AMETEK. Brushless blower families are available in standard configurations. These include both low voltage and high voltage product lines. The low voltage products provide output pressure up to 98 "H2O and flows up to 190 cfm. The high voltage products provide output pressure up to 169 "H2O and flows up to 274 cfm.
AMETEK Rotron also designs and manufactures an assortment of regenerative blowers for industrial, environmental, instrumentation, and chemical processing applications. These oil-free products feature compact construction, low acoustical noise, highly reliability, and long lives without scheduled maintenance requirements, providing you with high air pressures/vacuums and the best warranty in the business.
|
|
Cutter and Trim Blower
for industrial, corrugated, printed paper manufacturing usage.
Product features include:
1. Vibration on bearings =< 2.5mm/s for all fans and blowers
2. Long Service Life
3. High Efficiency
4. Low Running Cost
5. Low Noise
6. Heavy Duty and Sturdy Construction
7. Oil Free
We also manufacture other kinds of high quality cast centrifugal blowers.
Please inquire further details.
|
|
Wind blower for environmental check/test stand technology after Kunden-Spezifikation. Special fans in axial and radial building method.
Blower for aero-dynamic tests for Environmental test/test of facilities according tons more customer specifications. Special fan in axially and centrifugal Design.
|
|
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
TB-250x8T
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
• Compact blowers for air or gas, pressure or vacuum with motors from 3 to 50 Hp (2.2 to 37 kW)
• Continuous duty rating with NEMA or IEC drive motors
• Blowers are CE certified and can be customized for any application
• Options include welded 150 lbs flange connections
• High temperature designs for up to 400F (204C)
• Assorted coatings and platings for corrosive environments
• Drive packages for hydraulic and engine powered blowers
• Accessories include inlet filter-silencer, HEPA filters, acoustical enclosures, thermocouple bearing monitor, , butterfly valves, check valves and all piping arrangements.
• Products are CE Registered with IEC Motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order
• Fill out the on-line questionnaire for a quote
|
|
Northland offers a line of Centrifugal Blowers utilizing either our Universal
or Brushless DC motor technology. Our multistage blowers are designed
to operate in up to 120 in H2O (300 mBar) with 0 flow, and up to 220 CFM (100L / sec) at open flow.
|
|
Transportation fan, directfloated, circulating or being certain cover disk.
Sizes:
VRT 400 - VRT 1,250 (D mm)
Employment:
To the promotion of dust, soot, splinter and fiber parts, to 90°C
Technical data:
V = to 15 m ³ /s
Delta pt = to 6,000 Pa
P = to 75kW
Optionally with Keilriemenantrieb
|
|
|
|
|
|
FD range, air conveying blower
-Blower housings made of abrasion resistant cast iron
-hinged housing cover lid for inspection and cleaning
-welded sheet steel impellers with radial blades
-Maintenance-free squirrel cage rotor motors to IP54
The units can only be supplied in the housing position pictured.
Accessories: Various connectors for both inlet and outlet side.
RD F range
The RD F range can be used for conveying of light and non-abrasive bulk.
The blower parts are made of aluminium cast, the impellers are made of welded sheet steel. The solid construction of the practically maintenance
free medium pressure blowers is the basis for a long lasting service life and low operation cost. Inspection and cleaning may only be carried out at these blowers by unscrewing the housing cover plate. All drive motors are made to IP 54 enclosure, class F thermal insulation and comply with EN 60034-1 (VDE 530 Part 1). The motor power is oversized in order to have sufficient reserve for the conveying.
|
|
• Compact blowers for air or gas, pressure or vacuum with motors from 3-50 Hp (2.2 to 37 kW).
• Continuous duty rating with NEMA or IEC drive motors.
• Blowers are CE certified and can be customized for any application.
• Options include welded 150 lbs flange connections, high temperature designs for up to 400F (204C), assorted coatings and platings for corrosive environments and drive packages for hydraulic and engine powered blowers.
• Accessories include inlet filter-silencer, HEPA filters, acoustical enclosures, thermocouple bearing monitor, butterfly valves, check valves and all piping arrangements.
• Products are CE Registered with IEC motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order.
• Fill out the on-line questionnaire for a quote.
|
|
TD-200
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
|
Where air is required to affect static removal at a distance and compressed air is not available, the Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar.
|
|
|
|
|
|
Dual Anti Static Blowers
H&O Single Ionising Air Blower is designed for the neutralization of the static charges which cause some serious problems. High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Blower seperates air molecules to the positive and negative ions by the electric field it generates and transports them.
Any static charged product passed from the efficient distance of the Air Blower will draw the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines.At the same time electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented.
Thanks to Air Blower which doesn't need any calibrations and can be cleaned and cared easily. Machines will perform hygienic, safe and high quality production with high performance without problems. There is one fan in Air Blower for increasing ionization distance and supplying enough air flow. System can be mounted to places which are hard to reach by the connection apparatus that is provided on the system. Blower filters should be cleaned occasionally.
|
|
EXAIR static eliminators neutralize static electricity charges in a wide variety of industrial processes. Anti-static products eliminate static cling that causes dust attraction, jams and tearing. Materials such as paper, plastic and textiles normally contain an equal number of positive and negative charges - that is, they are electrically charged. This static charge causes the following problems:
* Dust clinging to product
* Product clinging to itself, rollers, machine beds or frames
* Materials tearing, jamming or curling
* Sheet feeding problems
* Hazardous sparks or shocks
|
|
TB-125X5T
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
... see all the products in the category
Blowers
|
|
|
