|
|
Cutter and Trim Blower
for industrial, corrugated, printed paper manufacturing usage.
Product features include:
1. Vibration on bearings 2.5mm/s for all fans and blowers
2. Long Service Life
3. High Efficiency
4. Low Running Cost
5. Low Noise
6. Heavy Duty and Sturdy Construction
7. Oil Free
We also manufacture other kinds of high quality cast centrifugal blowers.
Please inquire further details.
|
|
A wide range of special side channel blowers is offered for transport of explosive or
corrosive gases with gas tight versions. For use of air in explosive zones a variety of blowers with Ex motors are available. ATEX conforming blowers are supplied with the required certificates. For applications with corrosive gases a range of protective coatings can be used, which are applied to the internal parts of the blower. Characteristics of gases often differ from air and influence the performance of the blowers.
We suggest to consult us for the choice of a matching blower for your process.
The following information will be needed for the selection:
- absolute pressure at inlet
- absolute pressure at outlet or differential pressure
- temperature of the gas at inlet
- nature of the gas
- mass weight of the gas
- application zone according to ATEX
Your inquiries are welcome.
|
|
TD-200
Our process blowers operate continuously for 24 hours a day,
365 days a year. The stability and reliability are recognized by
a large number of leading companies.
Casting Multi-Stage Centrifugal Blower
Casting Single-Stage Centrifugal Blower
Clean Room Fan
Conveyor Blower
Corrosion Resistance Blower (Hastelloy)
Cutter and Trim Blower
Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
Gas-Tight Blower
High Temperature Resistance Blower 850℃
Spark Resistance Blower
Wear Resistance Blower
|
|
Our process blowers operate continuously for 24 hours a day,
365 days a year. The stability and reliability are recognized by
a large number of leading companies.
Casting Multi-Stage Centrifugal Blower
Casting Single-Stage Centrifugal Blower
Clean Room Fan
Conveyor Blower
Corrosion Resistance Blower (Hastelloy)
Cutter and Trim Blower
Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
Gas-Tight Blower
High Temperature Resistance Blower 850℃
Spark Resistance Blower
Wear Resistance Blower
|
|
Our Gas Tight Booster can reach 1 ~ 12 kg/cm2.
Manufacture according to each client's demands.
|
|
If high air pressure is required, AIRPACK is the right answer. With high static pressure of up to 24 kPa at 50 Hz and 28 kPa at 60 Hz, the AIRPACK high-pressure blower offers unbelievable performance. With the appropriate accessories, several Leister air heaters can be supplied.
High pressure
Sound-suppressed
Continuous operation
Can be fitted in every position
Air-inlet and outlet adapter can be mounted on both sides of the turbine
|
|
Our process blowers operate continuously for 24 hours a day,
365 days a year. The stability and reliability are recognized by
a large number of leading companies.
Casting Multi-Stage Centrifugal Blower
Casting Single-Stage Centrifugal Blower
Clean Room Fan
Conveyor Blower
Corrosion Resistance Blower (Hastelloy)
Cutter and Trim Blower
Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
Gas-Tight Blower
High Temperature Resistance Blower 850℃
Spark Resistance Blower
Wear Resistance Blower
|
|
|
Where air is required to affect static removal at a distance and compressed air is not available, the Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar.
|
|
The name says it: with 61 dB(A), the SILENCE blower is a pussyfooter and offers very respectable performance. Along with all Leister blowers it is well known for its dependability.
Low noise emission
High air flow
Continuous operation
Can be fitted in every position
|
|
TB-125X5T
Our process blowers operate continuously for 24 hours a day,
365 days a year. The stability and reliability are recognized by
a large number of leading companies.
Casting Multi-Stage Centrifugal Blower
Casting Single-Stage Centrifugal Blower
Clean Room Fan
Conveyor Blower
Corrosion Resistance Blower (Hastelloy)
Cutter and Trim Blower
Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
Gas-Tight Blower
High Temperature Resistance Blower 850℃
Spark Resistance Blower
Wear Resistance Blower
|
|
TB-350X3T
Our process blowers operate continuously for 24 hours a day,
365 days a year. The stability and reliability are recognized by
a large number of leading companies.
Casting Multi-Stage Centrifugal Blower
Casting Single-Stage Centrifugal Blower
Clean Room Fan
Conveyor Blower
Corrosion Resistance Blower (Hastelloy)
Cutter and Trim Blower
Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
Gas-Tight Blower
High Temperature Resistance Blower 850℃
Spark Resistance Blower
Wear Resistance Blower
|
|
Regenerative Blower Product Lines
AMETEK Rotron designs and manufactures an assortment of regenerative blowers for industrial, environmental, instrumentation, and chemical processing applications. These oil-free products feature compact construction, low acoustical noise, highly reliability, and long lives without scheduled maintenance requirements, providing you with high air pressures/vacuums and the best warranty in the business.
|
|
BBD/BSC series
Power class: 1.5-55 kW
ALMIG backs low-maintenance blower stages with three-bladed rotors for extremely quiet running and maximum pulsation dampening for conveying air and neutral gases.
A suitable solution all kinds of applications is produced from the clever modular system:
Plants with V-belt drive for economical operations at even capcity utilisation
Plants with direct drive and speed control for variable adaptation to varied consumer requirements
Different varieties of enclosures ranging from plain units to ones with super sound insulation
Many other variant types and options for customised extensions are available
|
|
Our process blowers operate continuously for 24 hours a day,
365 days a year. The stability and reliability are recognized by
a large number of leading companies.
Casting Multi-Stage Centrifugal Blower
Casting Single-Stage Centrifugal Blower
Clean Room Fan
Conveyor Blower
Corrosion Resistance Blower (Hastelloy)
Cutter and Trim Blower
Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
Gas-Tight Blower
High Temperature Resistance Blower 850C
Spark Resistance Blower
Wear Resistance Blower
|
|
ACI Multistage Blowers are direct driven blowers offer quiet running and maintenance free solutions for many higher pressure applications. Direct mounting of the impellers and low motor speeds, produce minimal noise levels as well as high pressure performance and the modular system design offers a wide choice in the number of stages and power supply requirements.
- Available in single or three phase, DC, 400Hz, and ATEX versions.
- Comprehensive range of accessories is available, for example, hose & filters can be readily supplied.
- Volume or specialised bespoke available.
- Full design and testing facilities, including airflow and noise testing.
|
|
Globe Motors manufactures custom-designed axial-flow and centrifugal blowers to meet MIL-spec and industrial requirements.
Whether it's a miniature blower for spot cooling of electronic components, or a larger unit with greater air flows for compartment inlet or exhaust venting, Globe can custom design and build the blower that you need. And for reliable, worry-free performance, all blowers offered are powered by quality Globe AC or DC motors.
Our experienced design and application engineers stand ready to assist you with motion control solutions; and our vertically integrated manufacturing provides the capability needed to deliver prototypes quickly
|
|
The Vortex Blower can be utilised for both vacuum and postive pressure, being capable of meeting small airflow-high pressure requirements.
Small, lightweight and economical.
High efficiency impeller and strong constructions for prevention of dust.
Compact size /higher static pressure and lower noise /high efficiency.
Open structure of vanes to prevent absorption of dust from atmosphere, providing high efficiency of pressure.
|
|
|
JetAir Technologies has a complete line of direct drive blowers and air knife systems for pressure applications to 120" H2O [300mBar], vacuum to 100" H2O [250mBar] and flows to 1250cfm [2125 M3Hr].
|
|
Side Channel Fan | Side Channel Blower | Side Channel Exhauster
Outlet Pressures up to 650mbar
Inlet Vacuums up to 450mbar
Flow Rates up tp 1080m3/hr
SECOMAK Side Channel Blowers produce high performance from a small physical size and operate at low noise levels. This makes them ideally suited to applications such as pneumatic conveying, aeration and vacuum holding and lifting.
Construction is in cast aluminium and each unit comes complete with intake silencer and filter. All models are designed for continuous running and are maintenance free. They are suitable for use in ambient up to 40degrees C. Further details available on application.
Spares
- Bearings
- Assemblies
- Motors
- Drive Belts
- Silencers
- Filters
- Adaptors
|
|
Compact Blower
The innovative range of EP10A compact, variable-speed blowers can handle both hot and cold air. They have been recently upgraded to give enhanced reliability and quieter operation.
- Flow rates are up to 2000M3/hr (1200CFM)
- Pressures ranging to 250mBar (100 In. SWG)
- Noise: 82-91dB(A) depending on speed/power 72-79dB(A) with acoustic cover, Free Air, 1M
- Weight: 70Kg (7.5kW motor plus fan) 120Kg (18.5kW motor plus fan)
- Hot air versions, maximum inlet temperatures of 365 deg.F / 185 deg.C
- Available in three phase version only
- A comprehensive range of accessories is available, such as inlet silencers and acoustic enclosures
- Full design and testing facilities, including airflow and noise testing
|
|
Compact blowers for air or gas, pressure or vacuum with motors from 3-50 Hp (2.2 to 37 kW).
Continuous duty rating with NEMA or IEC drive motors.
Blowers are CE certified and can be customized for any application.
Options include welded 150 lbs flange connections, high temperature designs for up to 400F (204C), assorted coatings and platings for corrosive environments and drive packages for hydraulic and engine powered blowers.
Accessories include inlet filter-silencer, HEPA filters, acoustical enclosures, thermocouple bearing monitor, butterfly valves, check valves and all piping arrangements.
Products are CE Registered with IEC motors
Sonic is an ISO 9001:2000 Registered company
Most Blower/Motor assemblies shipped in 5 days from receipt of order.
Fill out the on-line questionnaire for a quote.
|
|
|
Aerzen High-Pressure Blowers are equipped with a compression-proof housing (PN 25). Driving shaft and conveying chamber sealed by various sealing combinations. Direction of flow vertical to the bottom. Drive via direct coupling with motor or via flexibly coupled spur gear.
|
|
DESCRIPTION: Single Stage, High-Speed Centrifugal Compressor, Oil-Less, Spindless Design.
DRIVE SYSTEM: DirectDrive Technology (Patent Pending), Impeller directly coupled to Motor Shaft with Variable Speed Frequency Drive Control. Integrated Motor Protection, Maximum Air Inlet Temperature: 150F [60C]
CONSTRUCTION: A356-T6 Alluminum, 79lbs. [36kg]
HIGH-SPEED MOTOR: TEFC, IP54, External Junction Box, 15/20HP [11/15kW] 3-Phase, 190-600VAC, 50/60Hz, 105F [40C] Ambient.
VARIABLE FREQUENCY DRIVE: IP20 (IP66 Availabl dame), 15/20HP [11/15kW] 3-PMI/RFI Electrical Filter, Digital & Analog I/O, Network Communication.
|
|
Hot air - For industrial cookers, industrial baking ovens, drying stoves, warming and thawing appliances. The hot air blowers are equipped with a motor individually developed for them. The advantage is that the roller bearing nearest to the drive motor in the hot air chamber is cooled intensively due to a special hollow shaft and the integration of an intermediate radial fan. The bearing which is very sensitive to heat is by this means protected against damages and expensive special constructions are no longer necessary.
Characteristics :
Ball bearing with hot bearing grease
Special end shield
Intermediate fan
Hollow shaft (from type L7 on)
Straight and backward-curved fan blades
Impeller material: Special steel
Special versions possible
|
|
|
Housing compression-proof for PN 2,5/PN 6. Cylinder with noise reducing chamber on the discharge side, housing with connections for injection- and water flushing, as well as for lubrication - and purge oil supply systems. Conveying chamber by single-acting oil-purged mechanical seals in combination with labyrinth seals sealed on the shaft. Direction of flow horizontal/vertical (depending on size). Drive directly via coupling or flexible spur gear (depending on size).
|
|
Gast's Regenair regenerative blower line for high volume vacuum or compressed air applications offers motor-mounted, separate drive, and models with explosion-proof motors used in Soil Vapor Extraction (SVE).
Double-sealed, permanently lubricated bearings on many models minimize maintenance while maximizing performance
The design ensures exhausted air is always clean and oil-free
Integrated mufflers on single ended units minimize operating noise and eliminate the hazard of an exposed impeller
Strong fan cooling helps dissipate heat around bearings and impeller housing, prolonging bearing life and allowing cooler air delivery.
All blower models shown are equipped with UL & CSA certified motors except separate drive models
|
|
|
Patented 3-lobe positive displacement blowers type GM. Blowers with 3-lobe pistons and two patented pre-inlet channels for pulsation reduction. The conveying chamber is sealed by 4 piston ring labyrinth seals. The driving shaft can be sealed gastightly. Vertical direction of flow. Drive via narrow V-belts or directly onto the driving shaft.
|
|
|
Patented 3-lobe blower stage with integrated pulsation reduction, a base support with integrated silencer. Unit extremely compact with hinged motor plate as tensioning device, flexible machinery mountings, suction silencer and more.
|
|
|
Housing flanges with O-ring-seals, vacuum-tight. Lube oil supply is effected by splash lubrication. Shaft seals by combined oil slinger-piston ring labyrinth seals. The driving shaft is sealed by double radial seal rings with grease barrier. Direction of flow vertical from top to bottom or horizontal clockwise (when looking on the driving shaft.) The direction of flow depends on the size.
|
|
EXAIR static eliminators neutralize static electricity charges in a wide variety of industrial processes. Anti-static products eliminate static cling that causes dust attraction, jams and tearing. Materials such as paper, plastic and textiles normally contain an equal number of positive and negative charges - that is, they are electrically charged. This static charge causes the following problems:
* Dust clinging to product
* Product clinging to itself, rollers, machine beds or frames
* Materials tearing, jamming or curling
* Sheet feeding problems
* Hazardous sparks or shocks
|
|
... see all the products in the category
Blowers
|
|
|
