|
|
Where to use : With all steam sterilizable sampling valves.
How to use: Manually-Instructions available
Use for: Sterilizing with steam.
Accessories:
Ignition: Piezoelectric (included)
Connection hose: PTFE (included)
Burner: Labogaz (included)
Material:
Steel Parts: AISI 316L(1.4404)
O-rings: EPDM
Foot: EPDM
Key measurements
394 mm * 194 mm.
Capacity: 0-250 ml. 0 - 8.5 oz.
Net weight: 1.8 kg./pc. 3.97 lb
Temp. range: 10 C - 1000 C. 34ºF - 212ºF
Pressure and temperature can be increased by using the a Pressure relief valve (850059).
Please note! It is prohibited to air mail or air freight the gas cans, it is a standard product available throughout the world. |
|
Boilers of biomass - COMBIPACK
COMBIPACK
DESCRIPTION:
Boiler of biomass with operation to pellets of heat ratings of 28, 34 and 50 KW.
- Yield superior to 90%.
- Burning of insulfado air.
- System of cleaning automatic manual or.
- 200 Deposits of or 400kg reversible to both sides.
- Possibility of working with pellet and firewood.
- Electronic Control.
FUEL:
Pellets
APPLICATIONS:
Any type of house, commerce, etc... |
|
ALSTOM has extensive knowledge of steam generation, combustion, fuel technology and heat recovery systems
Our wide range of equipment includes:
-utility boilers including drum-type, advanced once-through (sub or supercritical) and fluid bed, with a complete range of firing systems
-heat recovery steam generators (HRSG) for large gas turbines (>50MW) in combined cycle or cogeneration applications
-boiler products, including air preheaters, mills and pulverizers
We cover all types of fuels oil and gas, bituminous coal, anthracite, lignite, petcoke, oil refinery waste, industrial by-products and biomass.
Products and supply tailored to meet our customers needs |
|
Bono's HTH high temperature heaters are designed for capacities ranging from 2 to 25MW. Thermal fluids, of synthetic type, can be used both in liquid and vapour phase, up to 400°C.
The design of HTH heaters is innovative, gives several advantages versus the coil type design and on the other hand it is extremely reliable, thanks to Bono's experience with more than 2000 installations all over the world.
The main advantages of HTH are: the compact design, especially in terms of height, and the complete accessibility for cleaning and maintenance; the built-in preheater, in the same heater base, reduces the local assembly costs; the accessibility of the furnace allows a cheap repairing, since any tube is replaceable working inside the furnace.
HTH are supplied equipped with burner, regulation equipment, instruments, built-in preheater, safeties and accessories, in a transportable package, thanks to their original compact design. The package, ready to be connected to the network, is tested in Bono Energia's workshop before shipping, ensuring a quick and efficient site commissioning and start up.
All Bono's heaters are constantly updated by 30 engineers to the strictest international norms, in order to insure higher efficiency to save money and lower level emissions. |
|
Thermal fluid heaters series OMP and HTH (and HTH-R) are suitable for heavy duty industrial operation. They can operate with a wide range of mineral and synthetic thermal fluids.
The multi-tubular patented design offers common features joined to different standards in calculation and design, according to the maximum bulk and film temperature to be obtained (Design, construction and testing according to API 560 , ASME, EN, DIN, ABS, R.I.Na. SQLO and others).
Both series are suitable for medium-large capacity production and high fluids operating temperatures.
The innovative and patented multi-tubular design offers advantages versus the conventional heater coil design in terms of:
- Less operating costs, thanks to the higher thermal efficiency;
- Less maintenance and inspection costs, due to total absence of refractory and of fouling even, in case of oil firing;
- Less fuel and power consumption, because of reduced fluid pressure loss.
- Lower thermal fluids degradation rate, thanks to the small difference between bulk and film temperatures and to the higher fluid velocity in the radiant section.
Series: OMP / HTH
Design: Multi-tubular heater
Capacity: 1.7 to 17.4 MWt / 2 to 40 MWt
Thermal fluid temperature: up to 360°C / up to 400°C
Thermal fluid type: Mineral and synthetic |
|
BABCOCK WANSON is leader in the field of the design and the installation of thermal oil heaters TPC and EPC (high outputs, service contracts on demand, compliance with environmental standards).
User advantages :
- reliability and rugged long life construction ;
- guarantee on both the burner and the boiler ;
- efficiency, which can be higher than 92% over the operating range ;
- investments and maintenance costs reduced ;
- optimised heat balance, associates the high output of the boiler with very low thermal losses on the distribution system which means very high overall plant efficiency ;
- very short response time, low inertia ;
- optimisation of the thermal coefficient of transfer of the boundary layers ;
- low pressure of operation normally no more than total system resistance (10 bar max) for high temperature (350°C) ;
- well suited for indirect process heating;
- compactness ;
- safety of the whole system by the installation of dedicated controls and equipment to suit the process requirements (deaerators, temperature monitors and alarms, deaerator relay...) ;
- no corrosion, therefore, very long plant life. |
|
Thermal fluid heaters are a real good and innovative solution for heat production in those industrial processes where high process temperatures are required.
There are circumstances in which the use of a thermal fluid heater rather than a steam boiler is more suitable for heat production, usually to lower costs.
BONO ENERGIA’s key factors:
* More than 40 years of experience in production and engineering
* 4,000 installed units
* High quality control standards ( ISO 9001)
* Stringent design standards (ASME,API 560, EN, DIN )
* Continuous research and development
* Automation technologies at top level (Visit www.automataweb.com)
* Wide range of products (All capacity needs guaranteed)
* Customized solutions
* Global product supply
* World wide marketing presence
* Short delivery time
Benefits from a BONO ENERGIA’s choice:
* Life cycle at top level of the market
* Repeatable and sustainable performances over the life cycle
* Reliability
* High thermal and combustion efficiency (Operating costs reduction)
* The possibility to use different kinds of fuel
* Low level emissions |
|
The System OP Includes
The DB Boiler
Oil or gas fired burner (optional)
Thermo - oil circulation pumps
Boiler controls and safety equipments
Deaerator
Electrical control panel
|
|
Byworth Boilers offer a worldwide spare parts service, supplying boiler house ancillaries and boiler and burner spares.
Ancillaries include blow down receivers suitable for use with boilers from 250 to 18000 kgs per hour, and feed water tanks in mild or stainless steel manufactured to order.
Spare parts for any manufacture of boiler and most burner manufacturers can be despatched often the same day.
Typical spares offered:
Dunphy burner spares
Nu-way burner spares
Grundfos pumps
Lowara pumps
Danfoss oil pumps
Landis & Gyr controllers
gasket joints
boiler valves
Byworth can also manufacture replacement furnaces and D patches for boiler repairs, and also boiler fire tubes.
|
|
Boiler house components on a modular basis for
simple planning, fast assembly and fully automatic,
safe operation round off the LOOS boiler range in
the best possible way. The individual modules are
assembled completely at the factory and provided
with electrical wiring. The ready-to-use modules only
need to be connected to the supply lines and joined
up to each other. LOOS modular technology considerably
reduces the number of interfaces required,
thus increasing the benefit to the customer.
|
|
OPTISPARK is the integrated control system developed in cooperation with Cannon AUTOMATA. It consists of two sections: an integrated control system and the user panel (Human Machine Interface).
The integrated control system performs many functions usually carried out by several components such as steam pressure, water level, alarm data acquisition, and it sees to thermal efficiency with the aid of the most advanced control systems: combustion control through electronic cams, control of the oxygen trim, of the flue gas re-circulation and of the air fan by means of an inverter.
The H.M.I. features are: synoptic screens with multi-language
texts; high-resolution colour touch screen display; real-time and historical tracking of selected process trends; alarm reports log; navigator system; multilanguage editor.
OPTISPARK connects to the modern communications systems: it sends SMS and e-mail in case of alarms event; it is displayed on both the Intranet and the Internet; it connects to supervision systems via OPC server.
OPTISPARK's main benefits are: the performance equivalent to the most advanced DCS systems at a lower cost, the optimised combustion, the reduction of environmental impact, of fuel and energy consumption, and of the time for starting and checking the boiler. |
|
| AEC's M008 is a twin channel gas modulating control board for gas boilers. It controls accurately with PID and contains all the logic for managing the channels. It interfaces well with the FX30LWD to provide total control solution for a highly specified appliance. It is a drop-in replacement for the Gemini 960e combi boiler. |
|
| ... products without technical information |
| |
|
|
