|
|
Uni-Matic series flash coil steam generators are suitable when quick steam production is needed, also in case of frequent start and stop (Steam is instantaneously produced and there is not an accumulator).When steam is requested, production should be almost uniform, without heavy peaks.
Benefits:
- Easy operation, reduced maintenance and well proven performance.
- Tubular structure of both combustion chamber and convective section can be easily removed for inspection and replacement.
- Reduced operating expenses thanks to the high std boiler efficiency (88%).
- Flexibility in operation thanks to the quick steam production, even in case of frequent burner start and stop.
- Low thermal losses because there is no steam accumulator.
- Thanks to the restrict thermal inertia, UNI-MATIC are suitable to be used both in continuous and batch operation.
- High operating safety margin, thanks to the limited water volume running in the entire coil.
Fields of application:
- Laundries
- Dyeing process, laboratories, ironing factories
- Foodstuff and bottling processes
- Rubber, polymer and synthetic processes
- Community
- Desalination plant
- Chemical & petrochemical processes
- Agriculture processes
- Auxiliary services
|
|
Type DF
In the 80 to 2,000 kg/h output range, 12 sizes are
available. For all sizes, eased installation conditions
apply in most countries for working- and residential
premises.
|
|
BABCOCK WANSON are specialists in industrial coil boilers offering a range of steam generators from 150 to 8000 Kg/h with operational pressures from 5 to 50 bar. The water volume is low and flows directly proportional to the desired steam output using a positive displacement water feed pump. In the high pressure HPVAP Series 100 bar is possible in a closed loop thermosyphon pumpless design offering very high overall plant efficiency without pressure vessels and suitable for a range of batch and variable process flow applications particularly in edible oil processing.
User advantages :
- reliability and robustness ;
- maximum safety due to the low water volume under pressure ;
- installation close to the process with reduced plant costs ;
- fast production of steam from cold start in as little as three minutes ;
- production of high pressure steam up to 50 bar, even 100 bar for the closed loops with thermosiphon application ;
- burner complies with the most stringent regulations and is perfectly adapted to the application ;
- compactness with small footprint and low weight ;
- low thermal losses with automatic blowdown and reduced losses from the casings ;
- well suited to intermittent operations ;
- quality of the dry steam with BABCOCK WANSON separator.
|
|
Saturated Dry Steam; Immediately
Computer Aided Design in compliance with latest CE pressure equipment directives and EN Harmonized Standards.
Accredited Organisation F module Certificate (CE Mark)
Easy operation and maintenance
Small size, high performance
Safe operation
Compact solution for steam
Main components of steampack steam system package
HDR high pressure steam boiler developed with Swiss technology
Liquid or gas fired burner application
Feed water pump module with stand by pump and armatures
Boiler armatures including all operation and safety equipment
Electric control panel mounted on the system
Electrode - controlled water level safety system
Chimney (optional)
|
|
- 2 sizes
- E 6 - 72 from 8 to 97 kg/h in 12 performance ranges
- E 100 from 135 to 160 kg/h in 2 performance ranges
with working overpressures from 6 to 12 bar.
- Also available as pure steam generator made of stainless
steel.
- Can be equipped with fully automatic operation including
automatic blowdown, desalination and automatic control
by timer, remote control or central building control systems.
- Availabe as a compact, ready-to-operate unit with water
treatment and waste water cooling.
- No boiler house needed. In many countries, CERTUSS
electric steam generators can be installed without permit.
|
|
The MX range is a compact and affordable steam boiler ideal for small to medium sized users of process steam.
Each boiler is individually tailored to your specific needs and manufactured from start to finish in our own factory, thereby ensuring quality control of the very highest standard. All fittings are mounted in the factory to make installation on site as quick and easy as possible.
The boiler can incorporate any make of burner to suit a wide range of gaseous or liquid fuels in single, dual or tri-fuel combinations.
The MX boiler has a thermal efficiency in excess of 89% (based on NCV) .
External surfaces are well insulated and finished in tough, Aluzinc cladding.
The front door is lined with the latest ceramic fibre technology offering significantly less heat loss than traditional refractory materials.
The MX range has larger heating surfaces and steam space than comparable boilers, meaning desirable low heat transfer rates, Low NOX emissions, easily achievable outputs, and quality dry steam throughout the firing range.
A huge range of accessories are available to further enhance the boiler; contact us for more details.
Manufactured to BS2790 Class 1 with outputs to 3MW (5000 kg/hr) and operating pressures to 17 bar(g)
|
|
The OPRA Generator Set is the best solution in the 2MW electrical power range to produce steam:
-High Turbine exhaust temperatures
-High exhaust flow
-High Overall efficiency
|
|
- 8 sizes with 16 performance classes ranging from 80 to
1800 kg/h of saturated steam with operating pressures
up to 32 bar.
- Unit with integrated fan burners for natural gas, liquid gas,
fuel extra light, and, as of 500 kg/h of saturated steam, with
combined burner natural gas/fuel EL. Biogas burners are
possible as well, depending on the gas quality.
- Availabe with fully automatic operation including automatic
blowdown, desalination and automati ccontrol by timer,
remote control or central building control systems.
Automatic sequence control or on-off control regulated by
the mains pressure for installations with multiple boilers.
- Facilitated installation conditions in many countries. No boiler
house required.
- Electronic function indication system with clear text indication
and long-time storage allows to analyse operation and
performance over a long period.
- Potential-free contacts allow to transmit up to 20 different
function messages to a central building control system.
- High degree of efficiency due to a proper burner technology,
perfectly adapted to the special construction of the steam generator.
Possibility to install a downstream flue gas heat exchanger.
|
|
|
Tubeless steam generators VPR are the result of considerable experience acquired by Garioni Naval in costruction of traditional steam boiler. They are ideal for small and medium size plants where medium pressure (up to 10 bar) steam is required. Their particular tubeless design ensures standards of safety and realibility which have received considerable acclaim from our customers. Our tubeless steam generators are ideal for garment industries, dry cleaning, ironing shops, saunas, and all industrial processes where high reliability is required.
|
|
- Completely pre-installed, ready-to-use, on a zinc-plated,
coated chassis including feed water tank and blowdown receiver
for wastewater. Electrical distribution with all switching elements
in central switch cabinet.
- Alternatively available as steam accumulator or heated with steam,
hot water or thermo-oil.
- Outputs ranging from 80 – 2000 kg / h with steam pressures from 0.5 – 25 bar.
|
|
ALSTOM has extensive knowledge of steam generation, combustion, fuel technology and heat recovery systems
Our wide range of equipment includes:
-utility boilers including drum-type, advanced once-through (sub or supercritical) and fluid bed, with a complete range of firing systems
-heat recovery steam generators (HRSG) for large gas turbines (>50MW) in combined cycle or cogeneration applications
-boiler products, including air preheaters, mills and pulverizers
We cover all types of fuels oil and gas, bituminous coal, anthracite, lignite, petcoke, oil refinery waste, industrial by-products and biomass.
Products and supply tailored to meet our customers needs
|
|
| ... products without technical information |
| |
Generators (power supplies) create the high frequency energy that produces cavitation in the cleaning tank. Branson offers the broadest spectrum of equipment in the industry, including both magnetostrictive equipment and piezoelectric units with features like line/load regulation, true variable power control, sweep frequencies, power modulation and power monitoring.
|
|
are tried and tested devices which have been specifically developed for the high demands of industrial cleaning technology.
Due to their modular design they are perfectly suited for all applications.
• Constant power output – continuously adjustable
between 40 – 100 %
• Constant oscillation amplitude
• Interface for monitoring and controlling
process-relevant functions
• Protection from short-circuit, no-load operation,
overload and overheating comes as standard
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
Other frequencies available on request
|
|
Ultrasonic Generator Specification:
- Chassis case designed to allow access from all sides
- Case for generator complete with power lead
- Full range of variable frequency sweep control
- Full range of variable power control
- On/Off switch with output power indicator
- 240v, 50hz supply
- Maximum 750 watt power output (nominal 500watt)
- Utilising MOSFET technology
- Fully tried and tested in the field
- Fully protected against open and short circuit output
- CE certified
|
|
|
Our Immersion Type Ultrasonic Cleaning System (Ultrasonic Transducer + Power Generator) provide versatile ways to add ultrasonics to new or existing tankage in a variety of industrial settings. Each group of transducers comes with the power generator. Still, it offers all the power and effectiveness of ultrasonic cleaning in a more convenient way.
|
|
Power Sonics has several exclusive individual portable ultrasonic generators to significantly improve quality, reliability and performance of ultrasonic cleaning equipment and power our line of transducers.
GM Generator is a completely redesigned generator featuring IGBT technology and has a unique load compensating circuit that is particularly effective in gaseous solutions. A replaceable and cleanable filter is included over the air-cooling fan. The GM replaces the GL generator and provides the same improved cavitation and uniformity under less than ideal operating conditions. These generators power both the Type IP immersible transducers and the CT Type tanks (Transducerized Console Tanks).
|
|
|
piezoelectric and magnetostrictive ultrasonic generators, flanged or bulkhead mount submersible transducers. Available work frequencies from 19 to 70 kHz. Modular construction of the piezoelectric units allow to supply a generator also with different frequencies.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
