|
|
The economizers exhaust gas boilers GN ECO have been studied to be installed in all types of industrial processes when discharging hot gasses in the atmosphere.
Hot gasses, flowing through the GN ECO are used to heat countercurrent, another fluid utilized in industrial processes, achieving important energy savings while reducing operating costs. |
|
The MX range is a compact and affordable steam boiler ideal for small to medium sized users of process steam.
Each professional boiler is individually tailored to your specific needs and manufactured from start to finish in our own factory, thereby ensuring quality control of the very highest standard. All professional fittings are mounted in the factory to make installation on site as quick and easy as possible.
The boiler can incorporate any make of industrial burner to suit a wide range of gaseous or liquid fuels in single, dual or tri-fuel combinations.
The MX boiler has a thermal efficiency in excess of 89% (based on NCV) .
External surfaces are well insulated and finished in tough, Aluzinc cladding.
The front professional door is lined with the latest ceramic fibre technology offering significantly less heat loss than traditional refractory materials.
The MX range has larger heating surfaces and steam space than comparable boilers, meaning desirable low heat transfer rates, Low NOX emissions, easily achievable outputs, and quality dry steam throughout the firing range.
A huge range of accessories are available to further enhance the boiler; contact us for more details.
Manufactured to BS2790 Class 1 with outputs to 3MW (5000 kg/hr) and operating pressures to 17 bar(g) |
|
The OPRA Generator set manufacturer is the best solution in the 2MW electrical power range to produce steam:
-High Turbine exhaust temperatures
-High exhaust flow
-High Overall efficiency |
|
| ... products without technical information |
| |
Dynetek Industries Ltd. designs and manufactures a lightweight Bulk Transport (BT) System for efficient transport of compressed natural gas (CNG) and other compressed gases. These BT-systems allow cost effective development of gas markets, and an Instant Infrastructure(R) by making CNG immediately accessible to end-users.
The unique storage advantage of the BT-System lies in the use of Dynetek's Dynecell (R) cylinders, a seamless, thin wall aluminum liner covered with a full professional carbon fiber overwrap. The Dynecell professional cylinder is non-permeable and exhibits limited expansion under pressure and temperature changes.
For more information visit www.dynetek.com |
|
Dynetek Industries Ltd. designs and manufactures Advanced Lightweight Fuel Storage Systems(R) for compressed natural gas (CNG), compressed hydrogen and technical gases.
The core technology of the system is the DyneCell(R) composite professional cylinder made from a seamless, thin wall aluminum liner covered with a full carbon fibre overwrap. DyneCell cylinders are extremely lightweight and are used in various applications around the world.
For more information visit www.dynetek.com |
|
To fill the tank with your machines or vehicles, do not waste any more time, choose a practical, reliable and autonomous delivery system.
Capacities: 1000,1500 and 2000 liters.
Other galvanized steel mobile versions, 400,600 and 980 liters.
|
|
| ... products without technical information |
| |
| Our systems for gas permeability measurement for plastic and rubber samples have simplicity, excellent selectivity, high sensitivity and wide dynamic range. The measurable permeating components include water vapor, hydrogen-sulfide, methane, ethane, carbon-dioxide, BTEX (Benzene, Toluene, Ethyl Benzene and Xylene), ammonia etc. There are two basic forms of our systems; the first one, which is based on photoacoustic industrial gas detection, is optimal for measurements at normal pressure and temperatures up to 120 ° C. The second one, which is based on photothermal beam deflection method, can be used also at extreme pressures (up to 1000 bar) and also at high temperatures. An outstanding feature of our system is that due to the very high dynamic range of the measuring method, it is possible to fit numerically the early part of the permeation curve, which results in a considerable reduction of the measurement time |
|
| The FlowSorb III is an entry-level single-point and multipoint BET surface area instrument. The FlowSorb measures surface area using the flowing gas method, which involves the continuous flow of an adsorptive and inert gas mixture over the sample at atmospheric pressure. It is ruggedly constructed and ideal for demanding analytical environments. |
|
Micromeritics introduces the TriStar II 3020, a fully automated, three-station surface area and porosity professional analyzer capable of increasing the speed and efficiency of quality control analyses, with the accuracy, resolution, and data reduction to meet most research requirements. The three analysis ports operate simultaneously and independently of one another. For additional throughput, four TriStars can be operated with one computer. The speed and accuracy of the Tristar II make it an ideal instrument for a wide variety of applications that include pharmaceuticals, catalysts, carbon, cosmetics, paints, pigments, geoscience, industrial fuel cells, high-tech ceramics, and much more.
The new TriStar II features a dedicated Po port, allowing the measurement of saturation pressure on a continuous basis. A 2.75-liter Dewar and extended length sample tubes allow complete adsorption and desorption isotherms to be collected without operator intervention. The TriStar II can collect up to 1000 data points. Fine details of the isotherm can be observed and recorded providing high resolution and revealing pore structure details. The instrument also features a krypton option, allowing precise measurements in the very low surface area range.
The TriStar II also combines versatility in analysis methods, data reduction, and reporting to allow the user to optimize analyses to specific applications. Reports include adsorption and desorption isotherms, BET surface area, mesopore pore size and area distributions, Statistical Process control (SPC), new isotherm and thickness models, isosteric heat of adsorption, and integrated DFT models. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Process-Gas Screw compressors are used in all applications where heavily contaminated components in gases and gas mixtures would curtail the life of other types of compressors supplier. Their low speed of rotation permits direct injection of large quantities of liquid.
These oil-free compressors attain volume flows of up to 100,000 m³/h and an outlet pressure of 50 bar.
|
|
Aerzen Screw compressors VR for process gas technology in modular system single- and multi-stage for dry compression of process gases. The Screw Compressor stage is available in 13 sizes with swept volume flows from 600 m³/h to 120.000 m³/h. Differential pressures between 7 and 12 bar are standard at single-stage compression. With multi-stage design discharge pressures of 25 bar and 40 bar max., but also vacuums lower Pe –0,9 bar are achieved.
The maximum (1350 mm) and the minimum rotor length (155 mm) give an impression of the entire breadth of the offer. For the adjustment to the different process gases, rotors made of steel or special steel and casing of nodular cast iron, steel- or special steel casting can be applied. |
|
| ... products without technical information |
| |
Temperature-resistant and heated Diaphragm Manufacturer of vacuum pumps and Compressors supplier
Uncontaminated transfer of air and neutral, slightly aggressive gases and vapours at temperatures of 240 °C. Heating prevents condensation of gas. Versions with electronic temperature control.
|
|
The Compact pumps are used frequently in the fields of analysis and medicine.
CONCEPT
The Micro Diaphragm Gas Sampling Pumps from KNF
are based on a simple principal - an elastic diaphragm,
fixed on its edge, moves up and down its central point
by means of an eccentric. In this way the medium is
transferred using automatic cocks.
The range of KNF Micro Pumps is for the equipped with the patented stress-optimised structured diaphragm, resulting in a high pneumatic performance, a durable product and compact size. New, very efficient
valves and sealing systems as well as the precise placement of the pump head are some of the other technical features we can offer.
For pump drive we provide a selection of industrial dc motors with
various levels of performance, durability and price.
AREAS OF USE
KNF Micro Industrial diaphragm pumps are used frequently in the
fields of analysis and medicine.
For instance as pumps for gas measurement, for
example for sampling environmental conditions in the
workplace, or for exhaust gas and smoke analysis or
built into machines for measuring blood pressure.
As they are dc driven, the micro diaphragm pumps are
suited for use in portable and stand-alone equipment |
|
Natural Gas Operated Pumps are CSA (Canadian Standards Association) certified for operation using sweet or sour natural gas. The pumps are also compliant with NACE Standard MRO175/ISO15156. The sweet gas pump utilizes Aluminum or 316 Stainless Steel wetted construction with Buna or Virgin PTFE diaphragms and check balls.
The gas cock is constructed of Aluminum with Buna elastomers. Pumps are fully groundable, preventing static discharge. A Stainless Steel gas valve option is available on G15 to G30 pumps for corrosive applications. |
|
Ideal for:
-Air Sampling
-Gas analysis
-Liquid Agitation
-Medical Nebulizers
-Aerobic Industrial wastewater treatment
-Ozone Professional generators
-Sequential Compression Devices (Circulation Therapy)
Product Features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
*Custom OEM Models
*Thermal Protection
*Aerobic Wastewater Treatment
*Aquaculture Aeration
|
|
|
|