|
|
STUDFIX™ is a stud designed to be crimped to achieve a screw function on metal sheet of any thickness.
For this type of component , crimping is carried out using a press. The groove located under the bosses receives the material of the metal sheet, which flows under the effect of the pressure exercised on the head.
STUDFIX™ thus offers high performance mechanical behaviour. Torque resistance is ensured by the anchoring of the bosses in the metal sheet, and high resistance to axial forces is guaranteed by the design of both head and groove.
|
|
JHFHB-M8-50
THREAD SIZE: M8*1.25
THREAD CODE: M8
LONG "L" :50
MIN.SHEET THICKNESS: 2
HOLE SIZE IN SHEET 0.08: 8
MaxHole In Attach.Parts: 9.5
H ±0.25: 12.5
S Max.: 3.5
T Max.: 1.78
MIN.DIST. HOLE C/L TO EDGE : 12.7
other sizes are fully available:
256, 440, 632, 832, 024, 032, 0420, 0518, 0616
M2.5, M3, M3.5, M4, M5, M6, M8, M10
JFH,JFHS,JFHA,JTFH,JTFHS,JHFH,JHFHS,JHFHB,JFH4.
Features:
1. They are applied on sheet with thickness over 0.02 inches/0.76 mm.
2. Carbon steel, stainless steel and aluminum material are available.
|
|
|
It is a quick and safe fixing system. It gives answer to assembling problems on plates, folded sheet-metals and thin walls, even when already painted. Self clinching are usually press-applied. They can be studs, nuts, stand offs or captive fasteners. They are available in steel, stainless steel and zinc plated steel.
|
|
Clinch studs are fastening elements which are clinched captive into formed sheet components. The results are sheet metal components ready for mounting. Clinch studs, therefore, are a reliable and economical weld screws, riveted or pressed-in bolts. Large press-out forces and high torques are typical for this production technique.
The reduction of production stages and of energy consumption results in considerable cost savings. An additional advantage is the possibility of processing several clinch studs in a single stage.
|
|
|
A full range of plastic screws with a good resistance to liquids , in a wide range of colours.
|
|
Specifications
Sizes: #8 to 1/4"
Lengths: 3/4" to 3-15/16"
Head Styles: Flat and wafer
Drive System: Phillips
Point Styles: Types 3 and 4
Material: Carbon steel
Finishes: Phosphate or gray Stalgard®coating
Features & Benefits
Eliminates costly pre-drilling of wood
Broad selection of sizes
Can be used with steel up to 5/16" thick
Gray Stalgard coating provides 1000 hours of salt spray resistance and was developed for use with ACQ treated lumber with retention levels no higher than 25 PCF
|
|
Considerable clamping strength, higher than that of a class 8.8 steel screw.
Dimensions : From M3 to M8 ex-stock, other dimensions under request.
Material : Steel zinc plated, stainless steel.
|
|
Overview
Developed to be molded into plastic and replace metal stamping and fastener assemblies, PlasTORX® studs are engineered to provide high resistance to rotation and pull-out, ensuring a high-performance assembly. Its hex-lobular design helps reduce stress risers, so it can be used in materials susceptible to cracking or breaking.
Features
Hex-lobular TORX® configuration
Flange on top of head
Threaded shank for nut member
Designed to be molded directly into component or carrier strips
Benefits
Allows multiple fasteners to be installed at one time, increasing assembly efficiency
Provides maximum resistance to rotation and pull-out
Ideal for materials susceptible to cracking
Design Guidelines
Sizes: M4 - M12 (#8 - 1/2")
Lengths: Per customer design
Thread Styles: Machine screw; others as specified
Specials: Completed assemblies available
|
|
KFH
Studs for mounting into P.C. boards which can be used as solderable connectors as well as threaded fasteners. Thread sizes #4 to #10 and M3 to M5.
FH, FHS, FHA, TFH, TFHS, HFH, HFHS, HFHB, TPS
External threads in sheets as thin as .020" / 0.51 mm. Included are flush- mounted studs, studs for thin sheets, high-strength studs, BUSBAR® studs, studs for stainless steel, and non- threaded alignment pins.
FH4
For installation into stainless steel sheets as thin as .040"
FHL, FHLS
Installs closer to the edge of a sheet than standard studs without causing that edge to bulge. Flush-head for sheets thickness .040"/1mm and greater.
HFED
These self-clinching studs have an enlarged head diameter that provides high-strength in sheets as thin as .040"/1mm. Dog point allows for easy nut positioning and engagement.
|
|
The weld lugs are available in numerous dimensions and types in order to meet all your specific welding solutions.
Quick and easy to fit, AMECA weld lugs offer high resistance to pulling without deforming the substrate sheet metal.
They are quickly fitted and enter perfectly into the quick welding processes required today by the metallurgy industry.
|
|
|
|
|
|
|
Substitute the drive code for the ? and the length for the L In the part no. to specify the exact part required. The 30 deg. Flank angle and recessed core diameter of these thread forming screws for plastic have been developed following theoretical appraisal, exhaustive calculations and final proof testing. The 30 deg. Flank angle produces low radial forces when engaging the plastic, therefore resulting in less radial stresses, in other words the hoop stresses in the plastic bosses are less than those experienced with conventional screws. The recessed core geometry provides the ideal flow director for the displaced plastic, encouraging a uniform flow to fill the pitch of the screw without material jamming. This results in the maximum amount of plastic being engaged providing higher sheer loads due to the increased bearing depth of the thread. A combination of the above and the ease of penetration of the 30 deg. Flank angle through the material, encouraging plastic flow, reduces the torque required to drive the screw in. This therefore increases the margin between drive and stripping torque which minimises the potential of stripping during installation. The optimum pitch and maximum fill features provided by the recessed core results in a large area of plastic to be sheered prior to screw failure in tension. This creates a high resistance to pullout loads.
|
|
|
|
|
|
Substitute the length of stud required for the ?? in the part no. and the finish code for the ?? following the part no. to specify the exact part required. These fasteners are available in Carbon Steel Heat treated and Plated Zinc and Clear passivated, Code 60, or in Stainless Steel, Code SS. Code 60 products are for use in sheets of Rockwell Hardness of B - 85 max. Code SS is for use in sheets of Rockwell Hardness of B - 70 max.
CS Clinch Studs are a fast reliable method of providing captive male thread forms in thin sheet metal sections. Their ease of use makes them the preferred fastening method for all sheet metal work used in the computer, electronics, electrical and telecommunications industries. A simple squeezing action with a press and bottom die installs the fasteners into the sheet where they are retained due to the coining groove being filled with material during installation. The stud has advantages over the nut in that they provide locations upon which components can be hung during assembly, improving production times.
|
|
|
KCD manufactures a huge range of metric and BSW studs. We can design and make almost any size, shape or configuration - threaded or non-threaded, in mild steel, stainless steel or aluminum. Standard popular studs are held in stock, ensuring 24 hours delivery
|
|
Pins with levelling head
Dimensions of M2.5 with M8
Matter steel zinc coated blanc*
For thickness of sheet from 1 to 3 mm
Ensure an assembly by screwing high characteristics (forced wrenching, various loads...)
Allows very powerful fixings
Very simple installation using a press
|
|
The pins to weld C2G are available in many dimensions (m3 in M25) and types in order to answer all your solutions of specific welding: SIG (Stud Inert Gas) - ARC (ARC fusion forging) or DEC (Discharge of condensers).
The quality of the pins to weld C2G confers a very great tear strength to them while allowing a fast and easy installation in the processes of fast welding imposed today by the metallurgy.
|
|
All lengths are available from M42 up to Lg 400, M48 up to Lg 300.
Fully threaded screws in stock.
Delivery: standard or retail packaging.
Non-tariff, non-standard, non-standard threaded LG, fine pitches: ASK US.
Large quantities: prices according specialised solutions
|
|
The captive components of the CAPTIFIX™ range enable a captive screwing or indexation function on a panel-type workpiece.
The retainer, which is in permanent contact with the workpiece holds the screwing or indexing element captive.
The various shapes offered allow crimping on a variety of materials.
|
|
Product Features and Benefits
Each screw thread size dictates the total length and thread grip area of the screw, but comes with multiple standoff mounting dimensions to accommodate varying panel thicknesses.
- Large highly polished knobs present a blemish-free finish
- Elongated shafts provide for easy grip, high above panel
- All stainless steel designs provide corrosion resistance
- 53 Class includes fully-retracting spring-ejected screws
- Two methods of flare-in installation - straight hole or chamfered hole
Available Options
- Available in bright polished stainless steel or with screw and standoff in black finish
- Special installation tools are available by fastener size for flaring standoffs and affixing retainer rings
Industry Applications
- Aerospace
- Automotive, Trucks
- Computers
- Electronic Enclosures
- Exhibits/Signs
- Food Equipment
- Industrial Enclosures
- Medical
- Networking
- Telecommunications
- Vending Machines
|
|
|
|
|
|
The Emile MAURIN company is very well organised to manage the special items.
This type of parts is 45% of our business.
A dedicated team is in charge of the special parts range, answering all customer demands :
* production feasibility
* fastener type choice
We can supply all type of fasteners according to your requirements : raw material, production process, coating, packing, ...
Please find below a view of special parts :
* Special parts :
- cold forging
- hot forging
- bar turning
- cutting
- precision fasteners
- microfasteners
* All materials :
- steel
- stainless steel
- brass
- bronze
- aluminium
- titanium
- plastic
* Finish :
- thread break
- lubrification
- colouring
* Coating :
- Electrolytic zinc :
- with CR 6 : black, green, yellow zinc
- with CR 3 : (conform ROHS directive) white zinc, nickel zinc
- zinc with hight salt test performance (from 48 to 720 hours) with or without topcoat, with different colours
- Lamellar zinc
- Hot galvanisation
- phosphate
- chromium
- nickel
- copper - tin
- coating on stainless steel : passivation, decontamination
* Specific customer specifications :
- package
- label
- AQP items
- PPM items
- control report external laboratory
- specific control documents
- safety stock
- kanban supply process
- EDI
|
|
Product Features and Benefits :
A variety of head styles and receptacle styles makes it easy to adapt the common benefits of quick, sure fastening performance to a number of materials and mounting conditions. Choose from small, medium, and large sizes to suit working load and dimensional requirements.
- Grip tolerant design accommodates variability in material thickness
- Loosely mounted captive screw simplifies quicker, easier alignment
- Fast-pitch threads deliver quicker access, greater pull-up, with less turning effort
- Variable tightening force is controlled by end user
- High-strength construction
- Corrosion-resistant materials
Available Options
- Screw finishes include hardened carbon steel with zinc chromate plus sealer, and 300 series stainless steel
- Retainers include nylon for general use, and stainless steel for outdoor applications
- A variety of retainer installation tools is available to match the appropriate sizes and styles of fast-lead captive screw retainers
|
|
Sammy(R) Screw benefits:
- Installs in less than half the time of drop-in anchors
- Single piece design, no nut and washer to assemble
- Suitable for concrete, steel and wood based materials
- Concrete installation requires smaller diameter drill bits than traditional drop-in anchors
- FM and/or UL approved
- Easily removable/replaceable
- Close to edge fixing giving high performance values
- Can be fixed closer together than traditional anchors without reducing performance values
- Self tapping in concrete and cuts its own thread in wood and steel
- Low cost condrive kits allow fast installation
- Allows vertical and horizontal installation in hard to reach locations
- Premium corrosion protection
- Shallow embedment gives flexibility in steel, concrete and wood.
|
|
ARNOLD Fastener Express finds its basis in the thinking behind Rapid Prototyping. The Functional Prototyping service model adapted by ARNOLD makes it possible to reduce development and production times by up to 75 per cent – with no detrimental effect on quality. With Fastener Express ARNOLD is in a position to manufacture and supply customised complex fasteners within three weeks.
by minimising administration work
by feeding the incoming order straight to technical assessment
by simultaneously translating the three-dimensional CAD data into the product
machining replaces tool design and procurement
|
|
- SPACER MALE / FEMALE WITH UNDERCUT
- COUPLING NUTS ROUND OR HEXAGONAL
- REDUCING NUTS M / F and F / F sample : M8/M10
- THREADED RODS DIN976-A
- DOWEL SCREWS WOOD / METRIC THREAD
- PLASTIC SCREWS and ACCESSORIES
- STAINLESS STEEL SCREWS and ACCESSORIES
|
|
|
|
|
|
The brand name M'DIRECT has been created by the firm EMILE MAURIN - Fasteners Department, in order to meet the needs of the industry maintenance services and the artisans, small users of fasteners.
The M'DIRECT range is done with fasteners packed in good quality cardboard boxes, with a practical pourrer, usable several times.
The fasteners standards coating and dimensions are mentioned on the labels, as well as the batch number for the tracability.
On the right side is the bar code, useful for the purchase, reception and sales.
The labels are also self-adhesive and can be used for resetting the orders or identifying storage areas.
100% of M'DIRECT items range are available and can be delivered in 24 hours working day in all France.
* Steel and stainless steel hexagonal head screws
* Steel and stainless steel socket cap screws
* Steel and stainless steel washers and serrated lock washers
* Steel machine screws
* Steel tapping screws
* Nylon plug
* Steel and stainless steel threaded bars
* Box of spring pins
* Box of retaining rings (shaft and bore)
* Box of blind nuts
* Box of threaded insert for maintenance
The M'DIRECT range make easier your fasteners purchase.
|
|
|
|
|
|
100 Deg Flat Machine Screws
82 Deg Flat Machine Screws
82 Deg Oval Machine Screws
Comb Drive Binder Head Screw
Economy Grade Thumb Screws
Fillister Phillips Machine Screw
Flat-Head Wing Screws
Hex Bolts
Hex Head Machine Screws
Hex Socket Cap Mach. Screws
Knurled Head Thumb Screws
License Plate Fasteners
Metal Core
Metric Econ Gde Thumb Screw
Metric Fill Phillips Mach Scr
Metric Hex Machine Screws
Metric Hex Socket Cap Screws
Metric Nylon Threaded Rod
Metric Phil Flat Mach Screw
Metric Phil Oval Mach Screw
Metric Slotted Grub Screws
Metric Slt Flat Mach Screw
Metric Slt Oval Machine Screw
Metric Slt. Hex Mach Screw
Oval Thumb Screws
Pan Phil Metric Mach Screw
Pan Slt Metric Machine Screw
Phillips Pan in Polycarb. Mat
Polycarb Slt Fill Mach Scr
Round Slotted Machine Screws
Slotted Binder Machine Screws
Slotted Fillister Mach Screw
Slotted Grub Machine Screws
Slotted Hex Bolt
Slotted Hex in Polycarb. Mat
Slotted Hex Machine Screws
Slotted Pan in Polycarb. Mat
Slotted Set Machine Screws
Slotted Washer Hex Bolt
Slt Cheese Metric Mach Screw
Slt Fillister Metric Mach. Screw
Slt Pan Machine Screws
Socket Set Machine Screws
Square Base with Threaded Stud
Threaded Rod
Threaded Studs
|
|
ARNOLD-POWERLOK screws correspond to Property
Class 10.9. By slight carburisation an
additional increase of surface hardness is possible.
® ARNOLDPOWERLOK screws are fastening and
locking elements in one. They can replace mechanical
and chemical lock retention methods.
• Easy fully automatic application is possible
because problems due to locking elements
getting caught are prevented.
• The locking effect is not reduced by temperature
or ageing (as is often the case with chemical
systems).
• Feeding problems caused by rubbed-off plastics
debris on vibratory conveyors cannot occur.
® ARNOLD-POWERLOK screws provide strong and
safe connections. They offer the correct solution
when oscillation and vibration are involved!
|
|
Stainless steel screws, bolts and fixing elements
Complete range in A2 and A4 stainless steel.
Machine screws, screws for sheet metal, wood-screws, self drilling, security screws, knurled screws...
Hexagon head, button head, hexagon socket, six lob, countersunk head, raised, slotted,
cross recessed "Phillips" or "Pozidriv"...
Threaded rods, with 1 meter, 2m, 3m lengt...
Plain washers, spring washers, spring lock washers...
Hexagon nuts, cap nuts, prevailing torque type, wing nuts, blind rivet nuts...
Studs, pins, blind rivets, retaining rings, threaded stirrup, hose clips...
Fixing elements for building : wedge anchor, shield anchor, screw for concrete, nylon plug, chemical capsule...
Stainless steel cables and chains, shipping accessories, turnbuckle, schakle...
Hinge rolled knuckles...
|
|
|
|
|
|
Emile MAURIN, as stainless steel fasteners specialist, propose to you a wide range of products :
* Hexagonal head bolts
* Socket cap screws
* Washers (all types)
* Threaded rods (length 1, 2, 3 meters)
* Machine screws
* Tapping screws
* Self drilling screws
* Wood screws, chipboard screws
* Special parts
Our fasteners are selected in several business : food, chemistry, pharmacy, water industry, building trade, navy, ...
Our products are in different grades : A2, A4, A4-80,A4-316L and tempered stainless steel.
Passivation and decontamination can be done.
With the addition of different alloy, we can obtain the chimical and mechanical performances adapted to the use :
- heat resistance
- cold resistance
- mechanical resistance
- oxydation and corrosion resistance
The stainless is quite recyclable so without any waste, which is a real advantage, in accordance to the environment policy.
Our proposal in stainless steel products is adapted to the industry requirements.
Please contact us by phone 0825 007 333 or on www.emile-maurin.fr
|
|
Socket head screw - metal
Group 340
# Made from stainless steel or mild steel (M4-M5)
# Finish: metal or zinc
# According to DIN912, NF E25-125, ISO 4762
Flat head machine screw - metal
Group 341
# Made from stainless steel or mild steel (M3-M5)
# Finish: metal or zinc
# According to DIN965, ISO 7046
|
|
|
Hexagonal, cylindrical and countersunk heads; metric and self tapping screws, socket set screws, hexagonal domed cap and flange nuts, washers, pins, threaded rods, rings, eye nuts, turnbuckles, jaws. Perfect for fixings subject to atmospheric environment, thanks to their high rust resistance. Available in stainless steel AISI 304 and 316.
|
|
|
|
