|
|
|
Selected aluminium oxides are embedded in a special vitrified bond. These honing rings, especially developed for High Performance Gear Honing process, allow a stock removal rate up to 0.09 mm per flank.
|
|
With Columbia TYROLIT raises the curtain on a new generation of race and bore wheels.
Columbia by TYROLIT closes the technological gap between conventional grinding wheels and superabrasives.
|
|
STARTEC is a TYROLIT product-line with a patented bond system, standard resin systems, improved grain and innovative grinding wheel design.
With STARTEC you will reduce costs through longer wheel life, shorter cycle time, higher process safety levels and better quality of your tools.
To achieve these goals the trend is towards CNC grinding machines. The advantages of these machines can only be used together with highest quality grinding tools.
TYROLIT has developed two new product lines, STARTEC-Basic and STARTEC-Ultra, for this very complex and customer specific area. These new products are for grinding HSS and cemented carbide tools.
|
|
Wheel adapters are available in popular widths to economically convert your grinder to a nylon finishing machine capable of graining, polishing and deburring for special applications.
|
|
|
The highly polished open flute not only allows for easier chip formation and evacuation, but also provides for a sharper cutting edge that delivers a better edge finish on a variety of materials. Our premium micro grain carbide allows for superb wear resistance and tool strength. Special point geometry contributes to improved bottom finish and plunging capabilities. Tools are available in upcut and downcut versions from 1/16" through 3/8" diameters.
|
|
Onsrud is proud to announce the launch of our NEW taper tools. These cutters are made of premium micro-grain carbide and are available in a variety of sizes, lengths, and angles.
The tools are available with a ball nose tip giving them the flexibility to cut draft angles in molds to 3D decorative profiles. The cutting geometry will allow them to cut a variety of materials and produce a good edge finish.
Custom tools can be made upon request.
Material: Wood, Plastic, Aluminum
|
|
| ... products without technical information |
| |
Stress Relieved and Annealed GA50 Meehanite Castings
Rigid Honeycomb Wall Column Construction
AC Inverter Spindle Drive
High Torque 8:1 Back Gear
Micrometer Stop for Quick Depth Setting of Quill
Halogen Work Lamp
Automatic Lubrication System
Double Lock Device for Axes
Precision Ground Table Surface
Hardened & Ground Way Surfaces with Turcite B
Dovetail Way Surface for X Axis
Square Box Ways for Y Axis and Knee
Internal Knee Rapid Feed Motor
Adjustable Double Nut Design for Minimal Backlash
Chrome Plated Precision Ground Quill
Induction Hardened & Ground Splined Spindle Shaft
|
|
Our most popular Knee Mill, combining the patented MillSlide® with our Centurion control, is one of the largest and most powerful Knee Mills in its class!
Oversized 4.125" quill with #40 taper
7.5 HP spindle with back gear
Patented MillSlide® construction offers a robust solution to Z axis travel without compromising manual quill operation
Fully programmable direct drive spindle offers higher spindle speeds, smoother operation and lower maintenance costs
Adjustable ram increases machine "throat" offering large machine capabilities at a small machine price
Rigid tapping available as an option
DRO operation in manual mode
Conversational programming
"Skill Level Select" software
Manual teach
Ground ball screw construction
True encoder positioning feedback
Graphic program verification
One event MDI canned cycles
Knee mills with ball screw driven quill designs are obsolete. Knee mills are for environments needing maximum flexibility. The Milltronics knee mills are simply the most exceptional knee mills ever marketed. The Milltronics patented Millslideâ redefines versatility, rigidity, and operator friendliness, and is the most innovative vertical axis solution ever invented for the knee mill. Simply stated, the Partner VK2, VKM3 and heavy duty VKM4 knee mills with the MillSlideâ are undoubtedly the very best toolroom milling machines in the world. Combined with a unique CNC system with exceptional value at low cost, we are sure you will come to the same conclusion.
|
|
State-of-the-Art Technology:
Chevalier's CNC machining centers are intricately designed devices that make a multitude of tasks much faster and easier than they would otherwise have been. Chevalier's CNC vertical machining centers are at the advanced edge of technology, producing a new level of automation, reducing workloads for your operators and lowering labor costs. It is not only the latest technology that makes Chevalier's machining centers the market leaders; it is also their innovative design. The CNC vertical machining centers feature a high speed machining for general purpose cutting or can be upgraded to equip with directly coupled or build-In type high speed spindle for high accuracy and excellent surface finish mold and die manufacturing. VMCs can no longer just be selected by analyzing a spreadsheet that compares spindle horsepower and torque, X/Y/Z travels and purchase price. In order to achieve results that will be competitive in the global market, shops must consider aspects of machine real performance that will produce extremely high accuracy and superior surface finish requirements.
|
|
| ... products without technical information |
| |
Renishaw probe systems provide an innovative solution to improve the efficiency of your machine tools.
Tool setting can measure the size of tools before cutting starts, and to check for tool damage or breakage during the machining operation.
|
|
The METROL tool setters for CNC machining centers provide accurate tool setting (1 micron repeatability) on CNC machine tools such as machining centers, milling machines, boring machines, and drilling machines.
The skip signals to NC systems and the program are used for the purpose of tool position setting, tool wear and breakage detection.
IP67 construction shows high durability even under harsh machining environment, compared to laser type.
Straight movement of the carbide contact promises better parallel balance than stylus-swing type.
|
|
Used in a large range of application, total loss oil lubrication involves creating a thin oil-film between moving parts which is renewed at regular intervals by an automated lubrication system.
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
|
|
|
General Purpose - HM Series Supermill - Designed primarily for discrete pass operation with medium to large grinding media size. This series is available in chamber sizes from 0.75 to 200 liters, with a capacity range from about 1.0 GPH to 900 GPH on average. The most economical mill selection offered by Premier, but has a limited range of applications related to the size of the grinding media required for processing. The HM Series can operate well over a wide viscosity range, and is generally used in 1 or 2 pass grinding applications with media size of 0.8mm or larger. There are various options to the HM including stationary front screen, and various materials of construction including plastics, ceramics and composites to suit particular applications. Standard type milling discs, or patented AP type high energy milling discs can be used to optimize mill performance. The basic HM design with Internal Rotating Screen has proven to be a "WORKHORSE" in general purpose media milling applications for over a quarter century
|
|
The Premier Submersible Basket Type Media Mill is an exceptionally versatile dispersion system specifically engineered to allow batch and tank size flexibility.
• Independently controlled mixers and milling shaft provide:
-Uniform particle size.
-Consistent temperature control.
-Better flow control.
-Minimal operator interface.
• Capable of particle size reduction in a range of slurry applications.
• Easy clean-up.
|
|
The rotor-stator gap can be adjusted on-the-fly by turning a hand wheel
Changing the gap setting allows the user to modify the shear rate applied to the fluid and achieve the desired process results
Indicator dial defines gap-setting position and ensures process repeatability
This machine is designed to handle a wide range of applications and empowers the user to make simple adjustments to achieve the precise product qualities they require
Vertical or horizontal mounting position makes mill ideal for batch, batch-continuous or in-line applications
|
|
The mills of series 2000 have a modular design. Within the construction size the machines are convertible to the inline dispersing machines of series 2000.
Constant speed parameters and generator geometries allow an exact scale-up.
All machines are CIP- resp. SIP-suitable.
Design, materials and surfaces correspond to the recommendations of FDA resp. EHEDG.
There are different grinding tools available.
The drives can be adapted to the respective conditions like flow rate, power requirement, protection type or ex-protection.
|
|
The DYNO®-MILL KD is an agitator bead mill with horizontal grinding container. Specially designed agitator discs, mounted symmetrically on a shaft, transfer the energy required for dispersion and wet grinding to the spherical grinding beads. An external pump feeds the product into the mill. Separation systems are available in the form of static sieve with different apertures or as a dynamic gap separator with adjustable gap width.
Advantages:
- Completely enclosed system
- Highest efficiency
- Easy operation and adjustment of the operation parameters
- Optimal geometry of the grinding container and agitator discs
- The appropriate mill size for every application
- Different materials available for wear parts in contact with the product
- Low operation and maintenance costs
Applications:
- Varnish and Paint
- Printing inks
- Dyestuffs- and Pigment Dispersions
- Thermal and fax paper coating
- Fillers and Coatings
- Microbiology and Biochemistry
- Agrochemicals
- Microelectronics
- Ceramics
- Pharmaceutical and Cosmetics
- Food and Cocoa mass
|
|
Premier's workhorse for the lab, widely used for the processing of small batches in the lab or pilot plant. With mechanical speed drive and 1.5 or 2.0 HP explosion proof motor, this unit has the power to satisfy a wide range of applications where mixing problems exist. The 2500HV breaks up agglomerates and reduces particle size. Increase your mixing efficiency with Premier's line of interchangeable mixing heads.
• Hi-Vis Head
• Simplex Head
• Duplex Head
• Rotor/Stator Head
Heads are also interchangeable with Premier's Model 2005 Lab Dispersator Mixer.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
