|
|
Mapei's products, adhesives and chemical products for building contribute to the quality of life of whoever chooses the Mapei brand, enhancing the aesthetic beauty, the comfort and the safety of the environment in which we live. In fact, Mapei's products are everywhere in our homes, underneath our floors, in concrete pillars or in historic buildings, reinforcements which are often invisible, but nevertheless inseparable from the elements which they bind together with their adhesive strength. As well as solidity and stability, the vast range of performance characteristics and colours which many of the products offer are potentially a source of assistance and inspiration for architects and project planners as they seek to create ever more attractive and more secure structures.
Mapei's product portfolio is divided into the following categories: Adhesives for floors, ceramics and natural stoneware ; Grouts and elastic sealants ; Adhesives for resilient, wood and textile floor and wall coverings ; Products for the preparation of all substrates for building ; Special hydraulic binders ; Pre-blended mortars and special products for the recovery of concrete structures ; Mortars and binders for the recovery of stone masonry ; Additives for mortars and concretes ; Waterproofing compounds and anti-humidity agents ; Soundproofing systems ; Smoothing agents and protective compounds for outside walls ; Polystyrene foam heat insulation systems.
|
|
Our cabling systems may be divided into two groups according to their field of application:
Systems for building installation:
ecobus power 5x10 mm²
The system for building automation. Both power current lines 5x2,5 mm² and bus lines 2x1,5 mm² with twin shielding are combined in one sheath. This means that the bus lines must not be interrupted any more for connecting devices - a principle, that was only used for power current lines until now. Thanks to ecobus combi, the bus installation requires a minimum of wiring works. Due to the decentralized repartition of the bus devices, the structure of the installation suits perfectly every type of requirements.
ecobus combi 5x2,5 mm² 2x1,5 mm²
ecobus power 5x2,5 mm²
ecobus data 2x1.5 mm²
multibus 4x1,5 mm²
ecoline-p3 3x2,5 mm²
Systems for industrial application:
ecofil i 5x16 mm²
ecofil i 7x2,5 mm²
Industrial appliances nowadays reach a high flexibility thanks to bus systems and control devices. To allow easy implementation and maintenance works, the applicances often have a modular structure which has already been determined during planning. The ecofil i 7x2.5 system perfectly suits appliances which have to be easy to modify and where power current and weak current have to be supplied in an easy and secure way. Thanks to this system, the T-pieces which are commonly liable to breakdowns and which are usually necessary for the branching of round cables can be avoided.
|
|
The small drive with the great advantages.
A light, convenient beginner drive with 14kW power.
-Ergonomic: clearly laid out, arranged operator elements.
-Super easy to manage: motor removable for transport.
-Also for 16 A current: change over button.
-Simple handling.
-Can be operated on 16A and 32A current.
|
|
INFLATABLE SHELTERS
For intensive traffic applications with vehicles
of different sizes.
MECHANICAL DOCK SHELTERS
For quite intensive traffic applications with vehicles
of varying sizes and models.
CUSHION SEAL
For quite intensive traffic applications with vehicles
of similar sizes.
|
|
Dock seals and shelters greatly improve energy conservation, internal temperature and worker environment, product and packaging protection from outside elements, employee safety, as well as, reduce pilfering at the loading bay.
Many configurations are available from basic types of compression dock seals, standard dock shelters, inflatable seals to hybrid dock seal/shelter/inflatable designs. Allow the Blue Giant team to assist you with choosing the best product suited to your unique needs.
|
|
|
Thermally insulated loading locks complete with BTA 400/60 F gate seals and complete with HV 3020-6 sliding adjustable ramps and industrial gates as a gate row installation. Here, no preparatory work has to be done by the customer.
|
|
Ground Isothermal Portal
The model KDT ground isothermal portal is recommended in particular to seal off ground-level loading bays equipped or not with elevator platforms, with limited maneuver space and requiring the removal of the structure to allow for the transit of vehicles.
This portal is provided in all its versions with a canvas front reinforced with harmonic steel springs and single-piece PVC plates and, if the loading bay is equipped with an external elevator platform, the portal can be built with a length suitable to contain this equipment thus making it possible to work with any type of weather.These structural features reflect our stringent quality standards: retractable hot-galvanized steel structure to prevent damage by the vehicle and class 2 self-extinguishing PVC/polyester canvas.
|
|
Recommended in particular for the sealing of the loading entrances of refrigerated warehouses because the inflatable pads fit perfectly to the edges of the vehicle being loaded thus preventing costly heat exchange between the warehouse and the outside environment.
Thanks to its intrinsic features, it is suitable for a wide array of vehicles of all sizes.This portal does not convey the thrust of the vehicle being loaded against the warehouse structure.
|
|
|
Modular system. Workshop cart in sectional/ tubular steel construction, powder-coated, blue RAL 5007. Surface out of beech plywood, 22 mm thick with skirting on 3 sides, 80 mm high.1 steel cupboard and 1 cupboard of drawers. 2 castor wheels and 2 fixed wheels, solid rubber tyres 160 x 40 mm, castors with wheel locks, according to EN 1757-3.
|
|
Pedestal Trolley
- Constant level trolley
- Spring force can be reduced by removing individual springs
- 75 kg load capacity (seated workstation)
- 105 kg load capacity (pedestal workstation)
2 different versions:
- for seated workstation
- for pedestal workstation
|
|
- 400 lb capacity per drawer, the sturdiest in the industry
- 100% access to drawer contents
- 10 drawer heights available
- Variety of drawer accessories available such as :
partitions, plastic bins, hanging files bars, etc.
- Housing with predetermined fixing zones for installation of accessories.
- Available in 12 standard colors.
- 4 patents pending.
|
|
|
Sovella industrial trolleys cover both light and heavy industrial applications. Each trolley can be customized to suit the customer's requirements.
|
|
4400 Triple® Trolley, Utility Duty with Straight Handle and 3" (7.6 cm) Casters
Efficiently transports large bulky loads and then folds flat for easy storage.
Sturdy structural foam deck won%u2019t rust, dent, chip or peel.
Non-skid platform surface helps prevent load shifting.
Tough plastic construction is easy on walls and doors.
Three position straight handle lets users push, pull or fold flat for use as a dolly.
Casters are non-marking.
250 LB weight load.
|
|
K-1 Series
LOAD CAPACITY: 200 Kg.EQUIPMENT• 1 Shutter with lock.• 3 Sliding trays.• 1 Set of 6 divisions with dividing plates.• 1 Set of 3 divisions with dividing plates.• 1 Nitrile rubber top cover.• 2 Turning castors with brake.• 2 Fixed casto
|
|
Power drive kits for SPANCO gantry cranes provide high volume moving and lifting over a fixed travel route. Power drives can be used for travel on V-groove (inverted angle), ASCE crane rail or direct floor use on polyurethane tread wheels. T series gantries can be motorized either on V-groove or directly on the floor with polyurethane wheels. A series fixed height steel gantry cranes with an I-Beam span up to 15 feet can be motorized on a V-groove track only. The PF series gantry crane produces optimum design flexibility for motorized travel.
Features
Power drives for gantry cranes have a transfer capacity up to 15 tons. Power drives for gantry kits include two-drive assemblies with gear reducers, single speed 230/460V three phase TEFC motors and adjustable "soft-start" control.
|
|
Application:
The 4 leg gantry is designed to assist in the demolding process
in cast marble or solid surface production. Utilizing lifters and hoists, the
demolding gantry can greatly reduce the amount of stress and damage
to the molds, as well as decreasing the time needed to demold product.
Also available in the bulk bag gantry system for the Autocastertm and
Batchmastertm casting systems.
Description:
4 leg demold gantries feature a heavy duty steel I beam, 3" tube
steel legs, electric or pneumatic hoists, dual or quad cup lifters, and
durable Gruber blue powder coating for protection. 4 leg demold/bulk
bag gantries are available in lengths of up to 16 feet.
|
|
The Eurosystem overhead handling system can be perfectly adapted to your work-site layout or production line and offers a variety of possible configurations.
Eurosystem offers a wide range of possibilities: monorail system, runway, single-girder overhead crane, double-girder overhead crane, single or multiple track systems with changes of direction.
|
|
| ... products without technical information |
| |
|
|