|
|
Epoxy Resin
Ref: ER2001
Black
Medium viscosity
General purpose
Flame retardant to UL94V-0
Excellent insulation properties
Application: Potting PCBs, coils, transformers, mould casting
Epoxy Resin
Ref: ER2074RP250G
White
Thermally conductive
Flame retardant
No abrasive fillers
Application: Potting PCBs, power supply DC-DC converters, temperature sensors
Epoxy Resin
Ref: ER2183RP250G
Black
Lower Viscosity alternative to ER2074
Enhanced machine mixing and dispensing
Application: ABS, pressure and temperature sensors, power supplies
|
|
|
|
|
|
Master Bond formulates a wide selection of metal charged adhesives for numerous industries. Theses include metal repair adhesives with aluminum and stainless steel fillers.
Master Bond’s line of electrically conductive adhesives is the number one choice for the design of tomorrow’s advanced electrical circuitry. Nobody offers more choices or solutions. The Master Bond product line includes silver, nickel, copper and graphite filled compounds. We even offer silver coated nickel systems for low resistance where cost effectiveness is crucial. Specific compounds are designed to cure at ambient temperatures or upon brief exposure to elevated temperatures. The cured products offer high physical strength, superior substrate adhesion and uniform electrical conductivity even upon exposure to hostile environmental conditions. Long term durability is excellent.
Master Bond also manufactures one and two component thermally conductive systems. They include epoxies, silicones and other elastomeric systems. Special formulations for unusual service conditions are available. They include serviceability to 500°F, at cryogenic temperatures, and in high vacuum environments as well as systems that are easily repairable. Designed for easy application, these compounds can be purchased in convenient packaging. They are used on heat sinks, fan sinks, package lids, motor controls, multiplexers, sensors, power semiconductors and thermistors. Toughened systems have been successfully employed in applications requiring resistance to shock, vibration and thermal cycling.
|
|
|
DYMAX light-curable adhesives cure in seconds upon exposure to longwave ultraviolet light and/or visible light. Light-curable adhesives optimize the speed of automated assembly, enable 100% in-line inspection, and increase product throughput. Industrial adhesives are available for plastic sealing, metal bonding, and glass assembly, as well as for joining dissimilar substrates.
|
|
|
|
|
|
|
Master Bond Inc. offers a broad line of potting and encapsulation materials designed to protect electronic circuitry and assemblies from potentially damaging conditions such as moisture, various corrosive chemicals, excessive heat, vibration, mechanical impact, thermal shocks and abrasion which might occur while the device is in operation. While the majority of the products offered are epoxies, including both rigid and flexible types, other systems are also available such as polyurethanes and silicone compounds. These systems include two part systems that cure at ambient temperatures or more quickly at elevated temperatures, as well as one part, no mix systems requiring elevated temperature cures. Master Bond's potting and encapsulation epoxies feature outstanding electrical insulation characteristics including high volume resistivity, excellent dielectric strength and low dielectric constants and dissipation factors. Some of the more specialized compounds include epoxies that are flame resistant, thermally conductive and cryogenically serviceable. Master Bond's technical staff will be glad to recommend the product best suited to your particular application's requirements.
|
|
|
|
|
|
Von Roll makes a wide variety of varnishes and resins for both low- and high-voltage applications based on alkyds, acrylics, urethanes, polyesters, polyesterimides, epoxies, and silicones. Most are specialized products that are optimized for a variety of processing techniques, such as Trickle, Roller Dip or Vacuum Pressure Impregnation (VPI).
Permafil® and Dolph® coating and finishing varnishes for electrical and electronic applications
Damival® two-component potting, encapsulating, and adhesive systems for electrical and electronic applications
Damilux® UV (ultraviolet)-curing glues or coatings for industrial and electronic applications
Permafil® and Dolph® impregnating varnishes and resins for electrical applications : rotating machines and transformers
Von Roll is committed to bettering our world by researching toxic-free and environmentally friendly solutions. Every year a large share of our research investment is dedicated toward materials that improve the performance of electrical equipment and reduce process costs yet help protect the environment.
|
|
|
CORDOBOND® epoxy repair systems for industrial, marine, utility and other demanding maintenance applications produce long-lasting repairs with outstanding impact strength, tensile strength and abrasion resistance. These liquid and paste formulations bond tenaciously to most materials for effective repair of pinholes and ruptures to complete breaks in pipes, tanks, flanges, machinery casings, etc., including equipment carrying water, low-pressure steam, gases, petroleum, alcohol and caustics. Specialized grades range from CORDOBOND Sealer for small holes; to CORDOBOND Steel Putty for repairs that can be drilled, tapped and machined.
|
|
Stainless steel-filled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment
KEY FEATURES
* Non-rusting
* Bonds to ferrous and non-ferrous metals
* NSF certified for potable water applications
* Acceptable for use in meat and poultry plants
* Listed under NSN stock #8030-00-268-7934
|
|
Advantages of Vitralit® UV and light curing-adhesives:
Easy handling
Short curing time for higher productivity
Solvent-free, no heat exposure
Long storage at + 5° c
Very good electrical properties
|
|
one-component acrylates
light-curing, UV-curing (see "curing lamps DELOLUX")
Bonding of modern materials and changed production processes are enabled and supported by continuous redevelopment of DELO-PHOTOBOND products.
Bonding of various raw materials of mobile loudspeakers
The loudspeakers' high quality is ensured by optimum, acoustic properties. High output by shortest cycle times. Bonding of aluminium door hinges onto glass shower cabins
Boreholes or unsightly clamping fixtures are prevented.
Properties DELO-PHOTOBOND:
graded elasticising from hard to tension-equalising enables
bonding of various materials for different requirements
curing within seconds allows short cycle times
Application areas:
Communications electronics
Consumer electronics
Automotive electronics
Plastic and glass processing
You can find detailed information about radiation curing in our brochure „Radiation curing“.
|
|
|
Dispersion, blending, powder-coating, and specialized suspension vinyl resins are used for formulating plastisols, powders and compounds for applications such as resilient flooring, artificial leather, can coatings, toys, and flexible gasketing and tubing. Vinyl chloride homopolymer and copolymer (vinyl chloride/vinyl ester) resins are fine white powders that can be easily dispersed in plasticizers and solvents.
|
|
Application:
Curing PUR resins for use on 2-component mixing and metering machines fore the manufacture of individual parts ore series manufacture of several thousand pieces.
Simulation of materials of serial production in stage of development and preproduction for automotive industry.
|
|
|
Superfluid epoxy resin for injection. Epojet is used for monolithic repair of structures which have cracked due to overloading, impact, earthquakes etc; it is also used for bonding and structural strengthening by low pressure injection and for sealing cracks in cement screeds. Epojet is a solvent-free epoxy adhesive, consisting of two pre-measured components to be mixed together with an electric stirrer prior to use. After mixing, Epojet becomes a low viscosity liquid ideal for injection. Epojet polymerizes without shrinkage and is watertight after hardening. For monolithic repair of degraded structures, inject Epojet into the cracks with a pump. Horizontal cracks in screeds can be sealed simply by pouring Epojet directly into them.
|
|
|
Two-component self-levelling flexible polyurethane resin and tar based sealant. Highly resistant to hydrocarbons, Mapeflex PB27 is formulated for sealing expansion joints in airport runways, highways, parking lots and garages, service areas and structures subject to vehicular traffic. Mapeflex PB27 is a two-component self-levelling sealant consisting of a polyurethane polymer (Part A) and a special tar-based hardener (Part B).
|
|
| ... products without technical information |
| |
Two-component reference resin (100% dry extract, no solvent, no odour): variable thickness and numerous finishes possible depending on your specifications.
High resistance (performance classification No. RT00-072 by the CSTB) to traffic, to abrasion and to chemical products ("sealed" floors). High adherence of epoxy.
For heavy duty flooring indoors (or outdoors with an application of Topcolor) made of concrete or with an old epoxy resin coating:
- easy application (two roller-applied coats recommended),
- or applied by our technicians for many different thicknesses and finishes.
1 coat of Neopox = 4 coats of conventional floor paint.
|
|
Flexible polyurethane resin
Two-component polyurethane resin (100% dry extract, no solvent, no odour) recommended for the food industry, hospitals and clinics, offices and civil administrations.
Flexible and comfortable to use with a very high resistance to scratches, shocks and dilute acids: ideal for industrial, professional or pedestrian traffic.
For flooring indoors (or outdoors with an application of Topcolour) on untreated or coated concrete (epoxy, polyurethane) old or porous floor tiles, asphalt or tar.
Application (maximum 2 mm thick) applied with a roller or serrated spreader for a self-smoothing coat.
|
|
100% solids (no volatile organic compounds) self-leveling floor coating that can be applied to smooth or mildly spalled concrete, producing an extremely durable and attractive chemical-resistant finish.
KEY FEATURES
* Silica aggregate can be added to rebuild floors that need a “high build” coating of 1/8” or greater
* Safe-T-Grit 300 or Anti-Skid Silica (food grade) can be added to the mixture to provide a non-skid surface
* Acceptable for use in meat and poultry plants
|
|
|
|
|
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: abrasive granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 105
Coefficient on wet ground : 80
Classification R13 to standard DIN 51 130
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 4% before breaking.
Simple maintenance: Regular cleaning with water and household detergents.
|
|
|
|
|
|
|
Master Bond Inc. offers a broad line of potting and encapsulation materials designed to protect electronic circuitry and assemblies from potentially damaging conditions such as moisture, various corrosive chemicals, excessive heat, vibration, mechanical impact, thermal shocks and abrasion which might occur while the device is in operation. While the majority of the products offered are epoxies, including both rigid and flexible types, other systems are also available such as polyurethanes and silicone compounds. These systems include two part systems that cure at ambient temperatures or more quickly at elevated temperatures, as well as one part, no mix systems requiring elevated temperature cures. Master Bond's potting and encapsulation epoxies feature outstanding electrical insulation characteristics including high volume resistivity, excellent dielectric strength and low dielectric constants and dissipation factors. Some of the more specialized compounds include epoxies that are flame resistant, thermally conductive and cryogenically serviceable. Master Bond's technical staff will be glad to recommend the product best suited to your particular application's requirements.
|
|
|
|
see the results for the following category : 
