|
|
|
The adhesive spray gun Maxi-ND-K is specially designed for processing dispersi¬on adhesives. All parts in contact with the material are made of stainless steel. Due to the low-pressure atomisation (system HVLP), a droplet ¬spectrum that facilitates optimum adhesions is generated. High application efficiency ensures good material exploitation. A large selection of nozzle sizes: 0.5/0.8/1.0/1.5/1.8/2.0/2.2/2.5 mm Ø is available. Owing to the shearing sensitivity of the spraying media, material transfer should occur without pulsation. For this reason, pressure tanks from WALTHER PILOT are the best solution. The tanks are available as standard in many sizes.
|
|
|
The DH12 Series Pneumatic Applicators are an excellent choice for use with water-based adhesives in a broad range of scenarios. Low voltage DC operation allows control without the need for proprietary pattern timers and the compact design makes for easy retrofit and installations. A miniature solenoid valve mounted directly to the applicator provides quick response times and positive flow control.installation.
|
|
FP-900 handguns minimize physical stress and fatigue when manually applying ambient temperature adhesives. Weight-supported design and ergonomic configuration allow operators to maintain a neutral wrist position. FP-900 handguns are ideal for gluing applications on flat panels in automotive, appliance and furniture industries.
Easily move left or right and in or out using the pivoting swing arm.
Spray patterns range from 1.0 to 6 inches wide (25 to 152 mm).
Design optimized for high-performance, ambient-temperature, moisture-cure materials.
|
|
|
|
|
|
NEW LIFE SERIES GUNS
They are characterised by a small size and a fast application. In both standard and high temperature execution, the NEW LIFE gun Series are available in different models (with one or more different distances and nozzles, with one or two solenoids), in order to meet any specific application requirements. Their standard configuration provides the New Life module (with seal cartridge system), and a self-cleaning zero-cavity nozzle for the best application. Moreover, the gun body is with a protective, non-stick coating on the gun body where is inserted the electric wiring for the best safety and the stainless steel glue filter which can be removed without disassembling the hose, ensuring the complete absence of impurities during gluing output, thus increasing the high reliability of Preo spray guns. The heating is produced by the most reliable electric elements and controlled by very accurate sensors. The wide range of models provides also the most demanding customer with the ideal solutions for each gluing problem.
|
|
The cold glue spray gun MZF is designed to air-atomized application of low viscosity fluids.
Solid and compact construction delivered with nozzle and air cap coated with antistick treatment.
On request this gun is available for solvent or acetate fluids
|
|
Electromagnetic guns for dots or lines application at very high speed.
Available with short nozzle or long nozzle.
These guns can handle medium viscosity cold glue with a maximum pressure of 20 bar.
A micrometric adjustment knob gives a fine control of dot or lines size without the use of any tools.
It is possible to make multi-nozzle head for cross gluing with minimum 11 mm nozzle distance.
|
|
Compact elettropneumatic extrusion guns with long nozzle, micrometric adjustment knob, double effect operation with solenoid valve.
Suited for contact or not contact glue application.
The micrometric adjustment knob give a fine control of glue quantity.
On request this gun is available for solvent or acetate fluids.
|
|
The universal adhesive spray gun PILOT III-K is exclusively suitable for solvent-based adhesives. In the automobile industry, the model PILOT III-K has proven itself many times, particularly in the manufacture of upholstery and in lamination. The body is coated with TEFLON® for comfortable cleaning.
Rotary jet nozzles are used so that the adhesives can be processed easily. Nozzle sizes: 1.0 / 1.5 / 1.8 / 2.0 mm Ø. The nozzle insert is designed such that material deposits on the air cap are avoided. PILOT III-K is available as a gravity-feed cup gun, as a siphon-feed cup gun, as a gun for pressure tanks or for connection to piston or diaphragm pumps. 10 years supply guarantee for spare parts.
|
|
2400 Series dispensers bring exceptional process control to a wide variety of benchtop dispensing processes where adhesives, lubricants, silicones, epoxies and other assembly fluids are applied.
By using a digital timer and a precision air regulator instead of operator judgement to control the amount of fluid applied, 2400 Series dispensers make it simple to produce uniform dots as small as 0.004 inches in diameter, apply neat controlled beads, or fill cavities with identical volumes of material
|
|
|
ITW Dynatec's Manual Adhesive Applicators are hand-held hot melt adhesive applicators which dispense hot melt adhesive onto a substrate via manual activation of a trigger. The DGII applicators are electrically heated independent of the adhesive supply hose. Temperatures are controlled by the controller at the adhesive supply unit.
|
|
|
ITW Dynatec's APEX High Speed Slot Die Applicator is an air-operated hot melt adhesive applicator assembly with an optional filter manifold. The applicator is used with intermittent pressure and constant pressure hot melt adhesive supply units (ASUs). APEX models are offered in six different module configurations.
|
|
AG-900 modular applicators dispense a broad range of solid or foamed high-performance materials using Nordson melters, bulk unloaders and foaming systems.
Reduce material consumption and part rework by eliminating clogs and dripping using zero-cavity module for accurate material flow and positive shutoff.
Choose custom nozzle-and-needle designs to meet specific application requirements.
Easily handle high-performance, high-viscosity materials with large fluid passages and specialized seal design.
Achieve accurate control by regulating pressure in the nozzle using optional dispense-head regulator.
Add production flexibility with modular design that can be used independently or with different combinations of regulators, actuators or hose interfaces.
Capable of handling materials from ambient temperatures up to 400°F and 300 psi.
|
|
|
Hot melt adhesive feeders automatically transfers hot melt adhesive from a bulk container to the adhesive supply unit increasing productivity and reducing equipment down time by keeping the adhesive supply unit full.
|
|
APPLICATION Suitable for producing adhesive tape, such as:
BOPP tape/Double-side tape/Kraft paper tape/Label sticker/Foam tape/ Cloth tape/Polyester and Release paper.
FEATURES Special designs, suitable for various kinds of materials.
Auto tension control.
Auto temperature controlling to suit refresh materials.
Special designs for heating system, high efficiency.
According to different types to design different coating method.
MAIN TECHNICAL PARAMETERS:
MODEL AT-500 AT-1000 AT-1300 AT-1600
Valid width 500 mm 1000 mm 1300 mm 1600 mm
Mechanical Speed 5-30M/min 5-80M/min 15-150M/min 15-150M/min
Coating average degree ± 0.025mm
Rewinding Edge Smooth ± 3mm
Mechanical Power 5-25 HP 20-45 HP 30-80 HP 40-100 HP
Oven Length Special design is available according to customer’s request
Heating Steam/Hot Blast/Thermal Oil/Electricity
|
|
|
The Pattern Controller is one component of an adhesive application system consisting of a hot-melt unit, cold glue pressure vessel or cold glue pump, adhesive hoses and applicator heads. The controller can be used for hot-melt or cold glue application. The pattern controller activates solenoids for the applicator heads in order to create individual adhesive patterns. Click on the links below to learn more about the full line of ITW Dynatec Hot Melt Pattern Controllers.
|
|
|
ITW Dynatec's Hot Melt Glue Applicators are air-operated or pump operated hot melt adhesive applicator assemblies. These glue applicator systems work with the adhesive supply unit and hot melt hose to automatically apply the adhesive to the product in a consistant and accurate mannor.
|
|
|
When it comes to hot melt glue supply units ITW Dynatec leads the industry. We manufacture a complete line of innovative adhesive supply units for low, medium and high-speed packaging operations. No matter what you need, Dynatec has the right hot melt glue supply unit to fit your needs.
|
|
Not only the right choice of adhesive is important, but also the right equipment. Handling is possible either directly from the cartridge or with our tank dispensing machine from our original packaging. As a result, you can have an exact dosage of different components, from heavy paste to fluid paste.
Our offer:
Cartridge dispensing machines
Quasi volumetric dispensing machines
Tank dispensing machines
Special dispensing machines
Accessories
|
|
|
|
|
|
EFD's new Ultra® 2400 workstation is a precision dispensing system that applies accurate, consistent amounts of adhesives, lubricants, silicones, epoxies and other fluids used in benchtop assembly processes - from neat, controlled beads to uniform dots as small as 0.004 inches in diameter.
Several accessories are available to enhance productivity and customize the Ultra 2400 workstation for different applications. Options include a flexible task light, a 1.7X magnifier for precision closeup work, a flexible syringe barrel holder that acts as a convenient "third hand," and an ergonomic barrel grip with a touch-sensor finger switch and LED spotlight to illuminate the dispensing area.
Standard features include
- Simultaneous digital display of dispense time, air pressure, vacuum, shot count and mode, for greater process control than standard analog gauges
- A unique internal pressure reservoir that reduces cycle time and improves deposit control
- Multilingual display in English, German, French, Spanish, Italian, Chinese, Korean and Japanese
- Automatic voltage regulation from 85 to 265 volts, with universal power plugs
- Automatic U.S./metric conversion of all dispensing parameters
- Security lockout with tamper-proof password control
|
|
|
Whether you wish to inject, cast or spray up adhesives, putties and other high-viscosity products, Matrasur Composites has designed a series of solutions for their adequate application under best conditions. Our machines are available in manual, automatic or even robotised configurations when it comes to spray-up. Polyurethane, epoxy, and silicon belong to the everyday list of products covered by our equipment line.
|
|
|
Extremely fast cycling electromagnetic Guns for non-contact application of glue dots. Small footprint with integrated tip sealer which protects the nozzle from drying during stops and a max. cycles rate to 1000 cycles/sec.
|
|
Electromagnetic Guns from Baumer hhs allow intermittent application at speeds which can no longer be served by conventional mechanical systems.
A sealed system reduces setup and maintenance, thus increasing machine output. Non-contact gluing further reduces contamination.
|
|
|
VersaDrum bulk melters deliver precise application of hot melt adhesives, sealants and butyls. Modular, non-stick platens, available for 200-liter (55-gal) drums, melt adhesive on top surface of drum only, reducing thermal stress and protecting bonding characteristics. Elimination of dead spaces in hydraulic passages makes VersaDrum melters well-suited for reactive adhesives.
|
|
Diamond Head
The world’s first fully insulated application head for hotmelt, the new
SX Diamond application head
Save and safe !
Precise and long lasting
”SX-Diamond” the application head
The first insulated application head for hotmelt !
Durability and precision are reflected in „Diamond“
|
|
We asked our customers what they needed in the next generation of hot melt dispensing systems. And you told us.
The result is four lines of melters with features that give you top performance and productivity for your operation. Blue Series melters let you:
- Simplify daily operation.
- Reduce maintenance and associated costs.
- Speed up and ease installation.
- Connect and communicate with other melters and line machinery using standard industrial network protocols.
- Expand to meet future requirements.
- Minimize parts inventory with compatibility to previous-generation Nordson products.
Blue Series melters are the most carefully engineered and thoroughly tested products we have ever manufactured.
Best of all, Nordson Blue Series melters deliver the same superior performance and outstanding reliability that are the cornerstones of all Nordson products.
|
|
Adhesive application my be as reliable as possible, but various companies and their customers require a proof, which products are erroneous, and moreover what percentage of the lot is.
Depending on application area, type of glue or its form there are different ways to check glue. Baumer hhs has an option for each application.
Cold Glue Sensors: Directly after application they detect, whether and where glue dots or lines can be found. If glue is alrady dried up, it is assumed not there.
Side Seam Sensors: Not only check if glue is there, but also its quantity. They are used to rate the gluing results from wheel pots.
Flow Rate Sensors: Built within the hose directly before the gun, they check whether glue has flown. This process is needed, when glue can not be seen after its application, for example in bore holes for dowels.
|
|
The unit melts granules and transports them through the heated hoses to the application heads under pressure. Various tank sizes are available.
You can connect up to 8 Xmelt® hoses.
|
|
glue spreader GS6206 GS6213
max length of spreading roller (mm) 600 1300
max working thickness(mm) 60 60
diameter of spreading roller(mm) 200 200
glue spreading speed(m/min) 24 23
motor power (kw) 1.5 2.2
overall dimension (mm) 1150×970×1300 2100×1000×1390
weight(kg) 450 700
glue spreader
|
|
|
|
|
|
ECLYSS 5-8 KG 2000-M SERIES PISTON PUMP
The ECLYSS 2000 - M Series of hot–melt applicators were designed for the application of adhesives and thermoplastic material with viscosity 500 and 30.000 Cps. The opportunity to choose between different tank sizes, combined with the option of mounting various microprocessors up to 4 channels with relative glue pattern control, renders the ECLYSS Series very versatile and suited for use in all fields of application, to satisfy the needs of the most demanding customers, where restricted dimensions or reduced glue quantities are necessary. The applicators are equipped with 5 and 8 kg tanks with heated ribs along the base of the tank to increase melting capacity and ease the flow of glue towards the bottom of the tank. All the parts touching the adhesive are coated with a special high temperature scratch-resistant PTFE non-stick surface, this prevents the glue from forming films that could be quickly transformed into carbonaceous residues, which cause premature wear and operational difficulties.Attention to design detail enables the glue filter to be easily reached and replaced. A combination of better adhesive distribution and the Preo progressive melt system prevents the nozzle from blocking due to adhesive residues.All ECLYSS Series applicators are equipped with either pneumatic or gear pumps. The pneumatic pump is a double-acting piston with a compression ratio of 13:1 and electric reversing system eliminating the pulsating effect of a single acting pump, and is recommended for adhesives up to 30,000cps.
|
|
|
|
|
|
GLUE DETECTOR CIA SERIES
It was specially designed to check automatic high speed gluing lines. The device detects each drop of glue and checks its continuity; moreover it indicates any possible anomaly in real time. It perfectly complements any existing dosing system because it is a completely autonomous device that is able to reduce production scraps almost to zero. The detection process is the passive infrared one: an innovative sensor is able to detect the infrared rays emitted by the drop of glue in real time, when available, with a detection time lower than one thousandth of a second. A powerful microprocessor makes sure glue detection, glue deliveries and alarm signals are properly synchronized thanks to the machine encoder and/or the quartz chronometer. This process is completely automatic even on variable speed lines. The device manages an instantaneous and a proportional alarm level and a practical piece-counter function. The optical measuring head is equipped with an air-operated cleaning system, so that it maintenance operations are not necessary even in very dusty environments. CIA Series Glue detector main topics are: real time detection of every deposited glue dot by infrared; real time signalling and report of every anomalies; complete control from microprocessor; full integration and compatibility with every existing dosing system; reduction to “ZERO” of production scraps; Installation completely independent; maximum flexibility with instantaneous and per cent alarm signals; optical head with pointing system fully automatic; auto-cleaning air system for dusty environment.
|
|
|
|
