|
|
The 2800 Series positive displacement dispensers are ideal for applying uniform amounts of two-part epoxies and other fluids that change viscosity over time.
Compressed air is not required%u2014instead, these electrically operated units use stepper motors and patented technology to advance and retract a piston inside the syringe barrel. They will produce accurate, repeatable deposits, regardless of changes in fluid viscosity or temperature.
|
|
EFD's Ultra® 2800 Dispensing System is perfect for applications that require precise metering of assembly fluids with changing viscosity or where a specific flow rate is necessary.
The system features a unique, patented technology that gives the user precise, repeatable results %u2014 regardless of changes in fluid volume, viscosity and temperature. This technology eliminates the need to adjust settings throughout the syringe barrel dispensing cycle, including the need to compensate for changes in fluid viscosity.
The 2800 System is electro-mechanically operated and does not require the use of compressed air. A powerful stepper motor is contained in the benchtop controller, keeping the handheld drive cable lightweight and easy to use .
|
|
2400 Series dispensers bring exceptional process control to a wide variety of benchtop dispensing processes where adhesives, lubricants, silicones, epoxies and other assembly fluids are applied.
By using a digital timer and a precision air regulator instead of operator judgement to control the amount of fluid applied, 2400 Series dispensers make it simple to produce uniform dots as small as 0.004 inches in diameter, apply neat controlled beads, or fill cavities with identical volumes of material
|
|
|
ITW Dynatec's Manual Adhesive Applicators are hand-held hot melt adhesive applicators which dispense hot melt adhesive onto a substrate via manual activation of a trigger. The DGII applicators are electrically heated independent of the adhesive supply hose. Temperatures are controlled by the controller at the adhesive supply unit.
|
|
DX-250 Series Digital Dispensers/Controllers
The DX-250/255 Series dispenses low, medium and high-viscosity fluids accurately and consistently. The DX-250/255 Series is immediately usable anywhere in the world with its accompanying tools, accessories and universal power supply.
The modern-style enclosure has a small footprint and conserves workspace through exterior design that allows multiple units to be stacked and fastened on top of each other. A highly responsive air pressure and vacuum management system, coupled with a digital timing circuit, provides consistent and repeatable fluid dispensing and material waste control. User friendly firmware provides quick and easy setup function.
|
|
Not only the right choice of adhesive is important, but also the right equipment. Handling is possible either directly from the cartridge or with our tank dispensing machine from our original packaging. As a result, you can have an exact dosage of different components, from heavy paste to fluid paste.
Our offer:
Cartridge dispensing machines
Quasi volumetric dispensing machines
Tank dispensing machines
Special dispensing machines
Accessories
|
|
|
|
|
|
EFD's new Ultra® 2400 workstation is a precision dispensing system that applies accurate, consistent amounts of adhesives, lubricants, silicones, epoxies and other fluids used in benchtop assembly processes - from neat, controlled beads to uniform dots as small as 0.004 inches in diameter.
Several accessories are available to enhance productivity and customize the Ultra 2400 workstation for different applications. Options include a flexible task light, a 1.7X magnifier for precision closeup work, a flexible syringe barrel holder that acts as a convenient "third hand," and an ergonomic barrel grip with a touch-sensor finger switch and LED spotlight to illuminate the dispensing area.
Standard features include
- Simultaneous digital display of dispense time, air pressure, vacuum, shot count and mode, for greater process control than standard analog gauges
- A unique internal pressure reservoir that reduces cycle time and improves deposit control
- Multilingual display in English, German, French, Spanish, Italian, Chinese, Korean and Japanese
- Automatic voltage regulation from 85 to 265 volts, with universal power plugs
- Automatic U.S./metric conversion of all dispensing parameters
- Security lockout with tamper-proof password control
|
|
zcM1000 ( M1000 ) ELECTRONIC TAPE DISPENSER
- Ideal for medium to high production of repetitive taping for industrial applications
- Program a defined length and automatically advance and cut tape
- Accepts tape widths from .28" to 2" (7 to 51mm)
- Cuts tape lengths from .79" to 39" (20 to 999 mm)
- Photocell actuated feed & cut or push-button feed & cut
- LED Digital length adjustment
- Manual override of preset lengths
- Blades good for up to 200,000 cuts (dependent on type of material)
- Steel frame for durability
- Cabinet made from flame retardant antistatic composite (auto ignition of 896°F/480°C)
- Comes with a 3 in 1 core (3" (76mm), 35mm, 1” (25mm)
- Adjustable pressure roller for different thickness’ of tape
- Accuracy of tape length is +/– .04” (1mm) (dependent on type of material)
- Many available accessories fit this machine. See Accessories section.
- Used in Manufacturing Plants World-Wide for 20 Years
|
|
KOLA Tape dispenser is designed for more productive uses: gift wrapping, cashier, and in various other shops.
There are 2 funcitons:
(1) Cut many tapes at once - same length (by turing the handle)
(2) Cut tapes Manually - any length (by pulling the tapes by hand)
It is becoming more important to have more convenient and productive operations in our workplaces, and our tape dispenser will help gaining higher productivity!
Please do not hesitate to contact us for more information.
|
|
Self adhesive tape roll:
Width 50 mm.
Internal diameter76 mm.
External diameter145 mm.
Adjustable clutch
Blade Protection
Ergonomic Handle
Packed in printed box
Available Personalization
|
|
|
Hot melt adhesive feeders automatically transfers hot melt adhesive from a bulk container to the adhesive supply unit increasing productivity and reducing equipment down time by keeping the adhesive supply unit full.
|
|
|
Extremely fast cycling electromagnetic Guns for non-contact application of glue dots. Small footprint with integrated tip sealer which protects the nozzle from drying during stops and a max. cycles rate to 1000 cycles/sec.
|
|
752V Series
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
|
The HME-500 are particularly suitable for high production speeds with simultaneous high demands on accuracy and cleanliness. They combine the Baumer hhs competence from electromagnetically operated cold glue technology with the special features of hot-melt application.The HME guns are extremely quick switching, free from wear and tear and maintenance friendly. Their compact design without compressed air connection and solenoid gun allows the installation even in the smallest gaps. The use of high quality materials and ideal heat distribution not only guarantee long life but also optimum quality of the glue application.
|
|
Cold glue feed units are designed to supply applications guns, by a pneumatic piston pump with ratio 4:1 or a diaphragm pump .
The pump is fitted on a plastic cover and it is easy to transfer on a bucket with water to flush the system.
The feed unit is provided with a stainless steel filter, that cut the pulsation of the pump.
A stainless steel pneumatic pressure regulator controlled by an I/P transducer keep automatically constant the glue quantity at every speed.
|
|
|
ITW Dynatec's APEX High Speed Slot Die Applicator is an air-operated hot melt adhesive applicator assembly with an optional filter manifold. The applicator is used with intermittent pressure and constant pressure hot melt adhesive supply units (ASUs). APEX models are offered in six different module configurations.
|
|
AG-900 modular applicators dispense a broad range of solid or foamed high-performance materials using Nordson melters, bulk unloaders and foaming systems.
Reduce material consumption and part rework by eliminating clogs and dripping using zero-cavity module for accurate material flow and positive shutoff.
Choose custom nozzle-and-needle designs to meet specific application requirements.
Easily handle high-performance, high-viscosity materials with large fluid passages and specialized seal design.
Achieve accurate control by regulating pressure in the nozzle using optional dispense-head regulator.
Add production flexibility with modular design that can be used independently or with different combinations of regulators, actuators or hose interfaces.
Capable of handling materials from ambient temperatures up to 400°F and 300 psi.
|
|
|
Whether you wish to inject, cast or spray up adhesives, putties and other high-viscosity products, Matrasur Composites has designed a series of solutions for their adequate application under best conditions. Our machines are available in manual, automatic or even robotised configurations when it comes to spray-up. Polyurethane, epoxy, and silicon belong to the everyday list of products covered by our equipment line.
|
|
The Heavy-Duty Adhesive Dispensing for Plexus Adhesives!
Designed for Maximum Performance, and Minimum Downtime
With decades of research and hands-on experience,
Plexus designed FusionMateDispensers for the most
demanding adhesive dispensing applications.
FusionMate Dispensers are specifically optimized
for Plexus methacrylate adhesives. Their heavyduty
design ensures years of consistent, reliable,
trouble-free service. Since most components can
be purchased off-the-shelf from industrial supply
houses, any maintenance or repairs can be performed
faster, more easily, and less expensively
than on competitive machines.
|
|
| ... products without technical information |
| |
|
|