|
|
|
The adhesive spray gun Maxi-ND-K is specially designed for processing dispersi¬on adhesives. All parts in contact with the material are made of stainless steel. Due to the low-pressure atomisation (system HVLP), a droplet ¬spectrum that facilitates optimum adhesions is generated. High application efficiency ensures good material exploitation. A large selection of nozzle sizes: 0.5/0.8/1.0/1.5/1.8/2.0/2.2/2.5 mm Ø is available. Owing to the shearing sensitivity of the spraying media, material transfer should occur without pulsation. For this reason, pressure tanks from WALTHER PILOT are the best solution. The tanks are available as standard in many sizes.
|
|
|
The DH12 Series Pneumatic Applicators are an excellent choice for use with water-based adhesives in a broad range of scenarios. Low voltage DC operation allows control without the need for proprietary pattern timers and the compact design makes for easy retrofit and installations. A miniature solenoid valve mounted directly to the applicator provides quick response times and positive flow control.installation.
|
|
The universal adhesive spray gun PILOT III-K is exclusively suitable for solvent-based adhesives. In the automobile industry, the model PILOT III-K has proven itself many times, particularly in the manufacture of upholstery and in lamination. The body is coated with TEFLON® for comfortable cleaning.
Rotary jet nozzles are used so that the adhesives can be processed easily. Nozzle sizes: 1.0 / 1.5 / 1.8 / 2.0 mm Ø. The nozzle insert is designed such that material deposits on the air cap are avoided. PILOT III-K is available as a gravity-feed cup gun, as a siphon-feed cup gun, as a gun for pressure tanks or for connection to piston or diaphragm pumps. 10 years supply guarantee for spare parts.
|
|
FP-900 handguns minimize physical stress and fatigue when manually applying ambient temperature adhesives. Weight-supported design and ergonomic configuration allow operators to maintain a neutral wrist position. FP-900 handguns are ideal for gluing applications on flat panels in automotive, appliance and furniture industries.
Easily move left or right and in or out using the pivoting swing arm.
Spray patterns range from 1.0 to 6 inches wide (25 to 152 mm).
Design optimized for high-performance, ambient-temperature, moisture-cure materials.
|
|
|
|
|
|
NEW LIFE SERIES GUNS
They are characterised by a small size and a fast application. In both standard and high temperature execution, the NEW LIFE gun Series are available in different models (with one or more different distances and nozzles, with one or two solenoids), in order to meet any specific application requirements. Their standard configuration provides the New Life module (with seal cartridge system), and a self-cleaning zero-cavity nozzle for the best application. Moreover, the gun body is with a protective, non-stick coating on the gun body where is inserted the electric wiring for the best safety and the stainless steel glue filter which can be removed without disassembling the hose, ensuring the complete absence of impurities during gluing output, thus increasing the high reliability of Preo spray guns. The heating is produced by the most reliable electric elements and controlled by very accurate sensors. The wide range of models provides also the most demanding customer with the ideal solutions for each gluing problem.
|
|
The cold glue spray gun MZF is designed to air-atomized application of low viscosity fluids.
Solid and compact construction delivered with nozzle and air cap coated with antistick treatment.
On request this gun is available for solvent or acetate fluids
|
|
Electromagnetic guns for dots or lines application at very high speed.
Available with short nozzle or long nozzle.
These guns can handle medium viscosity cold glue with a maximum pressure of 20 bar.
A micrometric adjustment knob gives a fine control of dot or lines size without the use of any tools.
It is possible to make multi-nozzle head for cross gluing with minimum 11 mm nozzle distance.
|
|
Compact elettropneumatic extrusion guns with long nozzle, micrometric adjustment knob, double effect operation with solenoid valve.
Suited for contact or not contact glue application.
The micrometric adjustment knob give a fine control of glue quantity.
On request this gun is available for solvent or acetate fluids.
|
|
| ... products without technical information |
| |
|
|
|
|
Classic Dependability… Unrivaled Quality… Now Safer Than Ever!
The world’s most popular thermal spray gun just got better with our new built-in safety feature! Today, all companies know that good safety practices and a good safety record are good for their employee’s health and well being, and also good for their bottom line. With the new 16E Combustion Wire Gun, you get
peace of mind by knowing you have the safest wire combustion gun available and still have the rugged,reliable gun you’ve come to depend on.
• Reduces risk of injury and damage to components and facilities
• Release mechanism stops gas flow and wire feed
• Complies with the most stringent standards, including the latest
CE requirements
• Lightweight and comfortable to grip, even for extended periods of time
• Simple to light and easy to operate
• Steady, consistent wire feed of any type of wire with no electricity required
• Your choice of configuration for a wide variety of fuel gases and wire
diameters
• Uses the same parameters as the 14E spray gun
• Integrates into existing wire combustion systems with no additional changes
• Saves money on process gases with instant shut off on handle release
Free Training DVD Included!
|
|
F4MB-XL!
The F4MB-XL is the latest generation of Sulzer Metco‘s F4MB, which has been redesigned for improved robustness, yet retains all aspects of the F4MB that have made this machine-mounted, atmospheric plasma spray gun a customer favorite for decades.
What’s new about the Sulzer Metco F4MB-XL?
• New more rugged design lasts longer without major maintenance
• New left and right water/power cable connectors prevent accidental polarity
reversal
• New cable cover stands up to harsh spray conditions without cracking or
melting
What’s the same?
• Use your existing F4MB spray parameters without adjustment
• Tool center points and mounting hardware are identical to the F4MB
• Uses the same F4MB consumable gun components, injector holders and air jets?
|
|
|
|
|
|
Process Description
Plasma Spray is perhaps the most flexible of all of the thermal spray processes as it can develop sufficient energy to melt any material. Since it uses powder as the coating feedstock, the number of coating materials that can be used in the plasma spray process is almost unlimited. A high frequency arc is ignited between an anode (nozzle) and a cathode (electrode). Process gases (generally mixtures of argon, nitrogen, hydrogen and helium) flowing between them is ionized to become a plume of hot plasma gas with that exceed the surface of the sun of 6,600 °C to 16,600 °C (12,000 °F to 30,000 °F). When the coating material is injected into the gas plume, it is melted and propelled towards the target substrate.
Features of the Atmospheric Plasma Spray Process:
- Large choice of coating materials, including metals, alloys, ceramics, cermets, carbides and others.
- Coating systems are possible, using layers of different materials.
- Produces surfaces for a wide variety of applications, including resistance to many different types or wear and corrosion mechanisms, desirable thermal or electrical characteristics, and surface restoration and dimensional control.
- Excellent control of coating thickness and surface characteristics, such as porosity and hardness .
- No heat affected zone or component distortion.
- High deposition rate.
- High bond of the coating to the substrate.
- Coating of complex geometries.
- Easy masking of areas that should not be coated.
- Process can be fully automated.
- Coating of internal geometries possible
|
|
|
JEBG Series / High Power Electron Beam Sources are designed to uniformly deposit metal oxides onto wide plastic films or steel plates in a continuous feed such as in magnetic tape manufacture for high-density recording or in wrapping-film manufacture with an oxide barrier function. Electron beam sources are also used for depositing of MgO film on plasma display panels and for development of surface-treated steel plates. Electron beam sources are also used for the melting of high-melting-point materials and high-purity metals.
|
|
| ... products without technical information |
| |
Use shrinkfilm and the new RIPACK 2200 ensuring optimal strength and protection for your toughest or heaviest loads.
The new RIPACK 2200, is 30 % more powerful- 245 000 BTU and 30% faster, Shrinkwrap quicker.
Other features – cold nozzle protection, variable pressure regulator and safety valve. Improved ergonomics – 360° rotating nozzle.
|
|
Model 998 Features:
Lightweight body design - weighs only 2.2 lbs.
Adjustable power - 134,000 BTU/HR @ 15 PSI (39 KW) to 212,000 BTU/HR @ 30 PSI (62 KW)
Safety trigger - automatically shuts off gun when released
Cool Combustor even after extensive use
2', 4', & 6' Extensions for shrinking large items
The Benefits of Shrinkfast:
Manufactured in U.S. - parts always available for immediate shipment
Factory reconditioning service available
Full 1 year factory warranty
Authorized Distributors around the world
UL listed
The Benefits of Shrinkwrap:
Protection from weather damage
Cost effective: (only pennies per pallet)
Shrinkfilm is waterproof - stretchwrap is not
Portable & versatile for any size job
|
|
Model 975 Features:
Rugged aluminum body design - weighs only 3.3 lbs.
125,000 BTU
Safety trigger - automatically shuts off gun when released
Cool Combustor even after extensive use
2', 4', & 6' Extensions for shrinking large items
The Benefits of Shrinkfast:
Manufactured in U.S. - parts always available for immediate shipment
Factory reconditioning service available
Full 1 year factory warranty
Authorized Distributors around the world
UL listed
The Benefits of Shrinkwrap:
Protection from weather damage
Cost effective: (only pennies per pallet)
Shrinkfilm is waterproof - stretchwrap is not
Portable & versatile for any size job
|
|
- Shrink pistol for propane gas
- flexible hose of 8 meters
- safety valve
- gas cylinder cart (cylinder not included)
|
|
Pistol-Grip Attachment allows paste to be applied manually to copper and brass assembly
Compressed air from control panel is introduced to upper gun body, forcing circular piston and attached piston rod upward against coil spring. Pressurized paste alloy (from reservoir) fills vacant space between piston rod tip and nozzle orifice.
As timer de-energizes, compressed air is exhausted, and coil spring returns piston and rod to closed position. Piston rod tip displaces paste alloy through nozzle orifice and seals opening until next cycle. Precise deposit size is obtained by adjusting control panel timer, paste pressure, and length of piston rod stroke.
|
|
Engineered to specifically address the waste and discomfort that result from dispensing materials in collapsible tubes. A comfortable, balanced design that safely protects the tube from damage and the operator from contamination.
First time users are recommended to supply a tube sample.Features
• Eliminates waste
• Avoids material contamination
• Improves operator safety
• Prevents tube damage
|
|
Utilising the time proven oval gear principal of positive displacement fluid measurement, the HG45 Preset Mechanical is a highly accurate, metered control handle ideal for use in all automotive, transport and workshop installations
Features
- dispenses up to 30 L/min (8 US gal per min)
- oval gear design
- settable volume up to 99.9 litres/US quarts
- easy to use thumbwheels for accurate volume setting - simply depress wheel and rotate
- able to set to decimal accuracy* easy to read 5 digit non-resettable total and 3 digit resettable batch total
- automatic non drip nozzle
- straight through flow path reduces pressure drop
- can be used without the preset function if required
- no batteries to fail
- simple handle latch design
- 10 year warranty
- 10 year guarantee parts availability
|
|
| ... products without technical information |
| |
Lightness and robustness autonomy characterize hand held model.
Thanks to its battery system, the gun marking offers great freedom of use.
With its ergonomic studied and adapted, it allows a perfect marking and quality in all positions.
Robust and very compact, it can be used in a workshop, or outdoors, for marking pieces of medium and large sizes.
|
|
MC2000 Superfast – Compact high speed portable dot peen marker than offers Marking speeds up to 16 characters per second.
MC2000 Series – is a computer-controlled portable dot peen marking machine with a larger X-Y axis marking window line available in both electric and pneumatic.
N34 Series – A heavy duty portable dot peen marker designed for deep, large character marking applications especially for the steel fabrication industry.
|
|
|
|
|
|
Microdots Marking Systems, the model P.1 has a window area of 65x35mm (2.5x1.4In). Here P.1 is displayed as portable marking machine.
Technical Details:
This technology can mark up to a 1mm depth and on surfaces irregularities up to 14mm (0.5In).
All models are available:
as portable handy tools,
as integrated systems,
as fixed structures.
Easy to program, P.1 can manage all following functions:
1000 programs in memory,
texts in line, angular, mirror,
arc-texts,
serial numbers,
batches of production,
time and date,
working shifts,
customized codes,
preview, diagnostic and many more.
The excellent management of the mechanical movements allows marking:
logos,
2D Matrix and OCR codes,
fonts per dots 5x7 and 11x16,
continuous line fonts.
The flexibility of the software allows communication:
with PC direct and wireless,
through RS232 / RS485,
from/to PLC,
from Bar Code readers,
TXT files,
integrated floppy disk port.
Low maintenance, reliable and friendly use, all Microdots Marking Machines are supplied complete with programmable controller with JOG function, tungsten-carbide stylus in 3mm or 6mm diameter, filter and air regulator and all accessories to suit customers needs.
|
|
|
|
|
|
The Clemco Power Gun is a suctionblast tool designed for dry abrasive blasting where the air supply is limited or the job is small. The tool is lightweight and compact and ideal where setting up a conventional pressure blast machine would be awkward or inconvenient. The Power Gun can be used with all common media to clean or etch metal, clean masonry, etch glass, and other durable surfaces.
Description of Operation
The tool simply connects to compressed-air and abrasive sources. The unique suction lance installed on the abrasive hose is partially submerged into a bag of media or connected to the optional media hopper. Blasting begins when the operator depresses a lever on the gun. The tool operates on the principle of induction, where vacuum is created by the compressed air rushing past the point where the abrasive hose attaches to the gun. The vacuum draws abrasive through the hose into the gun, where it mixes with compressed air. The air-abrasive mix exits the gun and strikes the surface to be blasted.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
