|
|
Adhesives, putties and other products of this kind are often applied in the form of strings through casting methods.
High viscosity is no longer a problem. Matrasur Composites’ proposes a machine range to match your needs in polyurethane, epoxy and polyester adhesives and putties. Our machines allow a direct use of the material, from the reservoir of your product supplier, without decanting.
One of the big advantages of our machines is that they are equipped with the "head mix" gun technique which significantly reduces cleaning constraints.
|
|
|
The adhesive spray gun Maxi-ND-K is specially designed for processing dispersi¬on adhesives. All parts in contact with the material are made of stainless steel. Due to the low-pressure atomisation (system HVLP), a droplet ¬spectrum that facilitates optimum adhesions is generated. High application efficiency ensures good material exploitation. A large selection of nozzle sizes: 0.5/0.8/1.0/1.5/1.8/2.0/2.2/2.5 mm Ø is available. Owing to the shearing sensitivity of the spraying media, material transfer should occur without pulsation. For this reason, pressure tanks from WALTHER PILOT are the best solution. The tanks are available as standard in many sizes.
|
|
The universal adhesive spray gun PILOT III-K is exclusively suitable for solvent-based adhesives. In the automobile industry, the model PILOT III-K has proven itself many times, particularly in the manufacture of upholstery and in lamination. The body is coated with TEFLON® for comfortable cleaning.
Rotary jet nozzles are used so that the adhesives can be processed easily. Nozzle sizes: 1.0 / 1.5 / 1.8 / 2.0 mm Ø. The nozzle insert is designed such that material deposits on the air cap are avoided. PILOT III-K is available as a gravity-feed cup gun, as a siphon-feed cup gun, as a gun for pressure tanks or for connection to piston or diaphragm pumps. 10 years supply guarantee for spare parts.
|
|
The cold glue spray gun MZF is designed to air-atomized application of low viscosity fluids.
Solid and compact construction delivered with nozzle and air cap coated with antistick treatment.
On request this gun is available for solvent or acetate fluids
|
|
| ... products without technical information |
| |
Type BI-J with product supply by cup underneath and air supply by turbine. Suitable for small or medium surfaces and for products with a low or normal degree of viscosity up to 30 seconds, Ford Cup n° 4
For each sprayguns, 3 types of fluid adjustment assembly (tubes, switches and head of air) are available:
- St : standard FAA for basic work,
- FAA C for precision work
- FAA multitrous M for body work (meticulous)
|
|
|
The Binks Mavrick is a high volume airless spray gun designed for FRP plural component spray applications. It features an external mix converging spray fan pattern of resin and hardner. An optional chopper attachement is available.
|
|
AGXV-540 Automatic HVLP Spray Gun (Standard production)
AGXV-541 Automatic HVLP Spray Gun (For higher flow rates, viscosities)
AGXV-543 Automatic HVLP Spray Gun (For corrosive or mildly abrasive coatings)
COMPACT 507, HVLP (Blue), SIPHON (Maintains regulatory compliance for HVLP)
COMPACT 506, HVLP (Blue), GRAVITY, 1 LITER (Maintains regulatory compliance for HVLP)
COMPACT 507, HVLP (Blue), PRESSURE (Maintains regulatory compliance for HVLP)
COMPACT 506, HVLP (Blue), PRESSURE (Maintains regulatory compliance for HVLP)
|
|
Introducing The Revolution Internal Mix Air Purge Spray Gun
Offering the Advantage of Internally mixing resin & catalyst without the constant concern of gelling the gun. Its lightweight and simple design is the ultimate in Polyester Spray Gun Development
Features:
- Enviromentally Sealed Valve Components
- Single Operating Piston
- Air Purge Eliminates Solvent Waste
- Pneumatic Trigger
- Automatic Air Flush
- High Flow Passageways reduce Spray Pressure
- Self Adjusting Fluid Seals
- Low Emission, Non-atomized Spray Package
- Hardened Components
- Low Repair Costs
- Less Down Time
- Less Waste
- More Production
- Cutter Mounting Kit Available
- Accessor and Robotic Adapters Available
|
|
Magnum Venus Plastech's EMG-1000 external mix gun is ideal for your external mix gelcoat operations. The stainless steel and aluminum construction will stand up in rugged environments, and the ergonomic design relieves hand strain for the operator.
With fewer parts, the EMG-1000 Gun is significantly lighter than the competition.
The EMG-1000 features an overall reduction in gun weight, balanced design handle and trigger, putting the weight of the gun further back over the hand for a distinct ergonomic difference.
The stainless steel and aluminum design of the EMG-1000 makes this gun the ideal tool in rugged and harsh environments. Complete immersion in solvent will not effect the performance.
|
|
- Uniform, consistent, reliable mix
- External mix of catalyst and resin
- One-touch flush for easy cleaning
- Cartridge resin needle & seat assembly
- Resin cartridge needle assembly changes
in less than 5 minutes
|
|
Magnum Venus Plastech's SuperPro-II is one of the most versatile guns for use in the FRP industry. With low pressure and low emissions, thousands of operators have found their gun of choice.
Featuring an ergonomic light weight design, with smooth pneumatic trigger action designed for better finger control this gun is both efficient and comfortable to use.
Using lower operating pressures than other guns, the SuperPro-II dramatically reduces atomization.
The SuperPro-II utilizes the exciting internal mix technology which cuts down emissions and material waste.
|
|
| ... products without technical information |
| |
Process Description
Plasma Spray is perhaps the most flexible of all of the thermal spray processes as it can develop sufficient energy to melt any material. Since it uses powder as the coating feedstock, the number of coating materials that can be used in the plasma spray process is almost unlimited. A high frequency arc is ignited between an anode (nozzle) and a cathode (electrode). Process gases (generally mixtures of argon, nitrogen, hydrogen and helium) flowing between them is ionized to become a plume of hot plasma gas with that exceed the surface of the sun of 6,600 °C to 16,600 °C (12,000 °F to 30,000 °F). When the coating material is injected into the gas plume, it is melted and propelled towards the target substrate.
Features of the Atmospheric Plasma Spray Process:
- Large choice of coating materials, including metals, alloys, ceramics, cermets, carbides and others.
- Coating systems are possible, using layers of different materials.
- Produces surfaces for a wide variety of applications, including resistance to many different types or wear and corrosion mechanisms, desirable thermal or electrical characteristics, and surface restoration and dimensional control.
- Excellent control of coating thickness and surface characteristics, such as porosity and hardness .
- No heat affected zone or component distortion.
- High deposition rate.
- High bond of the coating to the substrate.
- Coating of complex geometries.
- Easy masking of areas that should not be coated.
- Process can be fully automated.
- Coating of internal geometries possible
|
|
Air and Fluid Tubing - Nylon:
PLH-NP-2 Tubing and Connections, Air and Fluid
PLH-NP-4 Tubing and Connections, Air and Fluid
Air Tubing - Polyethylene:
H-2338 Tubing and Connections, Air
H-2339 Tubing and Connections, Air
Nylon Tubing Connections:
PLH-1438-SS Stainless Steel Connections
PLH-1414-SS Stainless Steel Connections
PLH-1838-SS Stainless Steel Connections
PLH-1438-SG-SS Stainless Steel Spring Guard Connections
PLH-1414-SG-SS Stainless Steel Spring Guard Connections
Polyethylene Tubing Connections:
P-HC-4216 Connections for Tubing
HC-4615 Connections for Tubing
P-HC-4221 Connections for Tubing
P-HC-4728 Connections for Tubing
P-HC-4215 Connections for Tubing
Fluid Quick Detachable Connectors:
P-HC-4808-1 Fluid Quick Detachable Connectors
HC-513-1 Fluid Quick Detachable Connectors
QDL-4808 Fluid Quick Detachable Connectors
|
|
... see all the products in the category
Hoses
|
GA-288 Pressure Gauge (0-160 PSI)
GA-313 Pressure Gauge (0-15 PSI)
GA-316 Pressure Gauge (0-160 PSI)
GA-333 Pressure Gauge (0-100 PSI)
GA-338 Pressure Gauge (0-160 PSI)
GA-73 Pressure Gauge (0-30 PSI)
GA-77 Pressure Gauge (0-30 PSI)
HAF-507-K12 WhirlWind In-Line Filter HAF
HAR-400 Air Regulator Lockout HAR
HARG-510 Air Control Regulator HARG
HAV-500 Air Adjusting Valve HAV
HAV-501 Air Adjusting Valve w/Gauge HAV
P-H-5516 Air Adjusting Valve
|
|
| ... products without technical information |
| |
|
|
