|
|
CHIMIE SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts.
Comply with standards :
ISO EN20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
HYPALON SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to corrosive chemicals, particulary to concentrated and hot acids, fuels and solvents.
Excellent resistance to abrasion and cuts.
For use with protective clothing in hostile environments.
Comply with standards :
ISO EN20345 S5 HRO CR SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
EN 13832-3 B L M N
Boots highly resistant to chemicals :
Acetone (B)
Sulfuric acid (L)
Nitric acid (M)
Acetic acid (N)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
TST SA 20000V Boots (safety toe cap + anti-perforation mid-sole)
Electrically insulated boots that protect workers from risks of pace voltage when there is a line-to-ground voltage fault during an intervention on alternative current 20 000V nominal voltage power supply network.
Made of dielectric rubber.
Individually tested.
Comply with standards :
Specification EDF : HTA 70B
Individually tested at 13 000V
Maximum leakage current 7mA
ISO EN20345 SBPE CI SRC
Perforation resistant (P)
Heel energy absorption (E)
Cold Insulated (CI)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
FIREMAN SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to heat contact, heat flow, fire.
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids.
Excellent resistance to abrasion and cuts
For use with protective clothing in hostile environments.
Comply with standards :
EN 15090 type 3
Boots suitable for emergency situation or fire involving release of hazardous chemicals that can cause loss of life.
EN20345
S5 HRO SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
EN 13832-3 J K R
Boots highly resistant to chemicals :
n-Heptane (J)
Sodium Hydroxide(K)
Sodium Hypochloride (R)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
Marine fire protection equipment certified by VERITAS, notified body N°0062
* made of steel for sizes 3 and 4,5.
|
|
Cut resistant boot aimed at forestry experts working with chain saws.
Class II protection and S3 version against impacts and puncture.
|
|
BOOT OF FIRE
Sole
- Sole rubber nitrile
- Coeff. of adherence to smooth and fatty industrial grounds: 0,17
- Density: 1,15
- Thickness: 7 mm
- Height of cramps: 6,5 mm
- Abrasive resistant (loss of volume): 86 mm3
- Tear strength: 11,4 kN/m
- Flexural strength (after 30.000 cycles): 0 mm
- Resistance to hydrocarbons: 1,5%
- Sole antiperforation
Stem
- Stem leather full damp-proof flower and oléofuge.
- Fully-lined imper-breathing SYMPATEX®.
"More" produced
- Inner sole great comfort.
- Matelassé Bellows. Calendered ventilated antisudation and antimycosic not woven lining.
- Very resistant Sole ALPEX, very notched out of rubber nitrile, particularly resistant to oils, hydrocarbons and the strong temperatures (>300°).
- True bent Goodyear.
- Non-skid Relief of wear of a dynamic adhesion coefficient very high.
|
|
|
Rangeboot BG S3 for oil industry leather full flower with sole: PU2D, textile sole antiperforation, end: Lightspace composite.
|
|
To cope with unpredictable situations: very uneven and dirty ground, frequent changes of workplace, difficult climatic conditions.
Cross-country walking type safety boot of original design, with a 200J steel toe and a midsole of pierce-resistant steel.
Upper in finest quality leather with brown water-repellent pull-up finish, with an ergonomically designed reinforcement in TPU at the front and back to make it more robust and give longer life
J-ESCAPE Outsole:
- Progressive shock absorber to protect the back and joints from vibration and impact.
- Resists contact heat up to 300°C
- Multidirectional self-cleaning deep tread, for maximum adhesion in any situation.
Standard: EN 345-1 S3 HRO.
Sizes: 38 – 47 (5-12)
|
|
ABSOLUTE SAFETY BOOT
EN 345 - S5
HERCULES
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
Lining
|
|
Responding to the need for comfort and flexibility, together with resistance to hydrocarbons and abrasion, in especially harsh working conditions.
Safety boot that has become the oil industry standard since it was created.
Its natural full grain AP 23 leather is oil and water-repellent. The specific curing process makes it flexible, breathable and long-lasting. It is 10% thicker than most other leathers and its resistance to water vapour is three times greater than the regulations in the EN 344 standard ( 180 mn / 60 mn )
Dual-density SOFTANE walking sole:
- Inert to contact with oils and hydrocarbons
- Antistatic
- Featuring the progressive heel shock absorber to protect your back and joints from shocks and vibrations
Standard: EN 345-1 S3
Sizes: 4 – 13
|
|
D1-9000 D1-9000 S2 / D1 9000 S3
Safety shoes
Conform to the standards EN ISO 20345:2004
Upper: leather
Lining: warm fur
Toecap: extra large AM
PU Sole : D1 (PU/Dual Density)
|
|
Polyurethane boot / S-00 - warm lining green
COD: EN 345-1 SB : XS00-G11-02
EN 347-1 : XS00-G11-00
Homologation: EN 347-1 /EN 345-1 (SB o SBP)
Upper: PU
Lining: warm lining
Sole: TPU rubber
Sizes: 36/47 (347) 40/47 (345)
Weight: Gr 2200
Packing: each pairs in one box// 5 pairs per carton
Characteristic: High protection against cold (CI). Extra large steel toe cap resistant to 200j (SB) steel midsole (SBP) wide last for the best comfort. Shock absorbing in the heel area, resistant to acids and hydrocarbons
Norms: EN 345 (SB SBP) - EN 347-1 issued by CIMAC Vigevano (Pv) Italia
Use: For cold stores, agriculture and skiing station
|
|
Upper: Low density PU
Sole: High density PU
Sizes: 37 – 47 (4-12)
Standard: EN 345-1 S5 CI
200 Joule steel toe and midsole
Removable cleanable insole, anti-odour and anti-bacterial.
Sanitized® treated
Antistatic
Plus:
30% lighter than a standard boot
Heat insulated
Exceptionally long life
Absorbs the energy of impact to the heels 25% better than a standard boot
Resistant to industrial oils and hydrocarbons
Multidirectional self-cleaning deep tread, for maximum adhesion in any situation.
|
|
New technology for better resistance to attack by chemicals.
Longlifesystem, a new exclusive PVC for longer-lasting Wellington boots and clogs:
The new composition of the AUDA Longlifesystem PVC uses new technology for plasticizers that makes the upper of the boot harder-wearing and so less likely to become weakened by industrial chemicals.
This technology allows more reinforcement at breaking points like the instep and the vamp where it meets the toecap for safety boots that meet the EN 345 standard.
All the uppers have received an anti-bacterial treatment for maximum hygiene.
Your team's feet will be protected for much longer!
AUDA Longlifesystem boots and clogs:
· Safety boots EN 345 with 200 Joule toecap:
Normandy SEC – Picardie SEC
· Work boots EN 347 without toecap:
Normandy – Picardie
· Work half-boot EN 347 without toecap:
Dauphiné
· Work clog EN 347 without toecap:
Bresse
|
|
ABSOLUTE SAFETY BOOT
EN 345 - S5
ARTEMIS
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
|
|
S-00 food industry warm lining / White
COD: XS00 W11 02 (EN 345-1 SB )
XS00 W11 00 (EN 347-1)
Homologation: EN 345-1 / EN 347-1
Upper: PU
Lining: Warm lining
Sole: TPU rubber
Sizes: 36/47 (347) / 38/47 (345)
Weight: Gr 2200
Packing: each pairs in polybag // 5 pairs per carton
Characteristic: High protection against cold (CI). “Extra large” steel toe cap resistant to 200j(SB). Wide last for the best comfort. Shock absorbing in the heel area. Resistant to oils, hydrocarbons and animal fats (ISO 6112-92).
Norms: EN 345 (SB) - EN 347-1 issued by CIMAC Vigevano (Pv) Italia
Use: cold stores, food industry
|
|
Upper: Antibacterial treated PVC
Sole in two materials: Antibacterial treated PVC and 100% Nitrile
Sizes: 36 – 47 (3-12)
Standard: EN 345-1 SB E
Steel toe 200 Joules
Absorbs the energy of impact to the heel
Plus:
Slip-resistant sole. Adhesion coefficient 53% higher than the requirements set in the standard
Better abrasion resistant Nitrile sole
Boot completely and easily washable
Polyamide lining
Completely smooth upper for easier washing because dirt does not build up
Protects the ankles
|
|
Great for environmental clean ups, concrete plants, poultry and meat packing and other applications requiring heavy duty protection.
- Made with ozone resistant material
- Traction grip soles
- 100% waterproof
- Over the shoe design
- Cotton lining
|
|
|
SHOES FOR CREWS® has redesigned the Guardian to be even more durable and comfortable. The Guardian is the only chemical, oil and grease-resistant boot built with technologically superior slip-resistance and anti-bacterial protection. And for added comfort, this rubber boot features our anti-fatigue cushioned insole
|
|
Code L 4493/2
Upper Microfiber, white color
Lining white color, absorbent, moisture wicking, high scratch resistance, anti-bacterial
Fussbett Removable, two layer, anti-static, soft latex foam inside
Sole Double density polyurethane, anti-static, non-slip, oil resistant, anti-corrosive
* Steel or Composite material crush-proof toe cap
* Steel or non metal pierce proof layer
Sizes
Steel toe cap 35 to 48
Composite material toe cap 35 to 47
Safety categories S2, S3
Fit 11 MONDOPOINT
Conformity EN ISO 20345:2004
|
|
MIX GUMMI S5 tuttacoscia / Green-Black
COD: EN ISO 20345:2004 : A05 G1 N0 01 21 (S5)
Homologation: EN ISO 20345:2004
Upper: PVC nitrile
Lining: Polyester
Sole: PVC Nitrile
Sizes: 39/48
Weight: Gr 2300
Packing: each pairs in polybag// 6 pairs per carton
Characteristic: “Extra large” steel toe cap resistant to 200j.
Steel midsole. Wide last for the best comfort.
Shock absorbing in the heel area. Antistatic, antislippery.
Resistant to oils and hydrocarbons.
Norms: EN ISO 20345:2004 issued by CIMAC Vigevano (Pv) Italia
Use: industry, building, agriculture and breeding.
|
|
For professionals who work in wet places - fishermen or water-treatment or sewage services.
Upper: High resistance PVC
Sole: PVC / Nitrile
Waders: PVC covered canvas. High frequency heat welded.
Total length 80 cm. Waist straps.
Sizes: 39-48
Standard: EN 345-1 S5
Toecap: 200 J steel. Liner stab-resistant steel
Antistatic
PLUS:
Ankle-bone protection
Heel shock absorbers
Reinforced instep for better protection and longer life
Heel tab
Structured sole to give good grip on greasy or loose ground, built up for better resistance to shock at the front.
Self cleaning treads
Resistance to hydrocarbons
|
|
|
|
|
|
The HELIUM range benefits from the AMS Concept (shoes which are totally non-metallic therefore non-magnetic ).
Focussed technology :
> Synthetic protective toe cap: light and resistant (200 joules),
> Para-aramid anti-penetration insert: lightweight, flexible, unalterable, resistant to penetration over 100% of the surface of the sole.
> Parabolic® (exclusive Lemaitre Sécurité patent) anti-slip sole with a curved profile and a double density insert at the heel. The concave structure of the sole promotes an excellent grip on all industrial floors. Moreover, during walking, after the compression phase, the energy is restored giving a dynamic effect: a spring effect. The effect is bolstered by a double density window inserted on the side of the heel for added energy absorption.
> Sole is resistant to oils and acids.
> Delimited heel for an added safety in many situations
Benefits for the users; these styles are:
> Impervious to thermal variations and transfers from -10ºC to +40ºC,
> Undetectable by security scanners
> Lightweight and exceptionally comfortable.
Recommendations: recommended for the electronic and electric industries, airports, logistics and transport, automotive supplies industry, controlled areas in factories,…
|
|
For men and women who spend a lot of time on their feet, to prevent tiredness caused by standing for long periods and for those handling heavy loads.
High-cut walking type safety shoe.
Upper in finest quality leather water-repellent, black
100% composite safety material: 200 Joule safety toe in Xétane and pierce resistant midsole in Flextane. Non-magnetic, non metallic, insulating and 50% lighter than steel.
LIGHTANE outsole, with 3A design:
Improved Adhesion, with an unique arrangement of tread in areas where the foot places pressure .
Anti-twist system: under the arch of the foot, to ensure the foot remains stable when walking
Progressive shock and vibration absorber sited under the heel
Standard: EN 345-1 S3 HRO
Sizes: 39-47 (6-12)
|
|
OUTDOOR SAFETY SHOE
EN 345 - S1P
X2000
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
- Moulded waterproof ankle boot (stitched tongue gusset
with lacing through waterproof rings ).
- Edged collar .
- Same chemical and mechanical resistance as the
SECUREX range from which it was developed.
- Same sole and lining.
- Average height: 120 mm.
|
|
Sole PU/PU
Available in S2 or S3
- Steel or non metallic toe cap 200J
- Steel or Kevlar insole
Available from size 36 to 50 (UK Sizes from 2 to 15)
Metatarsal protection articulated and ergonomic
ROBUSTA® EXCLUSIVE PATENT
Specialy recommended for: telephonic, mechanical, railways assemblies, ship-yards, metal industry, foundry work and boler-making.
|
|
GORE-TEX HPR lining
Lightness
Sole PU+N (Contact heat resistance 300ºC)
ROBUSTA® Slip Resistance Coefficient: 0.28
Non Bending System
Available in S2 and S3
- Steel or non metallic toe-cap
- Steel or Kevlar insole
Shock Absorbant Effect
Etra wide last
Sizes from 35 to 50 (UK Sizes: from 2 to 15)
|
|
SPECIALLY FOR EXTREME COLD
THINSULATE® lining, breathable, cold insulation
Sole PU+N Resistant to extreme cold -40ºC
Lightness
Non Bending System
Available in S2 or S3
- Non metallic toe cap 200J
- Steel insole
Shock Absorbant Effect
Extra wide last
Available from size 36 to 50 (UK Sizes from 2 to 15)
|
|
|
|
