|
|
|
|
|
|
TBT single-lip drills are manufactured for any drilling diameter (1/1000 mm steps) from 0.9 mm to well over 50 mm and in overall lengths which can even exceed 2500.
Depending on the material to be drilled, the machine utilised by the customer and the particular drilling situation, we manufacture the optimum tool for your applications.
Whether in standard version or for widening already existing bores, as step tool for making precision stepped bores with minimised centre offset or as special tool for special boring, whether without coating or in a version with coating, and for the most exacting requirements, also with diamond-tipped tool cutting edge.
TBT advises you and implements your head and shaft requirements for the tools efficiently and quickly with the latest design and production methods.
The tool head and shaft are brazed with the clamping sleeve to fit your machine.
TBT always keeps several hundred different clamping sleeves in stock. Just ask for our complete offer of accessories for deep hole drilling.
|
|
Drills are basic manufacturing tool whose speed, precision, and safety have an important bearing on the quality and efficiency of production operations.
OSG is gaining an increasingly large share of the drill market through the development of drills that ensure superior productivity.
Used in combination with OSG's taps and end mills as a total tooling solution, OSG drills provice manufacuturers with various business advantages, including cost savings.
Try with our:
- EX-SUS-GDS/GDR drills for stainless steels (No pecks anymore!)
- VP series for hardend steels with high speed drilling
- SH-DRL for quenched and tempered steels (up to 70 HRC!)
- etc....To request more information, please visit our Literature Request Page
|
|
MDS and KDS Drills meet the industry demand for effective and efficient driling of steels, cast irons and exotic materials. Available in large to very small diameters, they offer excellent productivity and about 10 times the tool life of HSS drills.
• Increased strength - A thicker web and narrower flute increase torsional rigidity throughout the drill body, reducing oversizing and improving surface finish.
• Lower cutting forces - Positive radial rake angles significantly reduce cutting force, torque and power requirements.
• Better chip removal - The cutting edge geometry, formed by the concaved cutting edge and flute wall produces short, curled chips which are easily evacuted.
• Advanced tool materials - A titanium substrate increases tool strength, while PVD coating improves wear, adhesion-resistance and cutting forces.
|
|
|
Solid Carbide Drills in Jobber Length...Fast Sprial...Three Flute...Straight Flute...Flat Drills...and Conbide Drill and Countersinks. Fractional and Metric Sizes
|
|
Flowdrill tools are molded and shaped from very high strength tungsten carbide. The forming part of the tool has a polygonal shape with four facets. These facets produce the friction while turning at high speeds to heat and form the material. Flowdrills are designed with an almost flat conical tip that transitions into a sharper conical shape that leads into the cylindrical shape. The conical and cylindrical portions of the tool are polygon shaped. The cylindrical part of the tool determines the diameter of the hole.
Several styles and sizes are available to suit your Flowdrilling needs. Sizes and styles can also be customized.
|
|
|
|
|
|
Flow punch forming with centerdrill is a process in which high-strength bushes or eyelets are produced in thin-walled metals using a simple operation without cutting. Instead, friction and feed pressure are used to heat and form the material.
The flow punch forming process may be used everywhere, where threads, bushings, soldering connections or through-holes are to be produced in thin-walled metals materials (e.g. steel plates, non-ferrous metals or high-alloy steels).
Flow punch forming can be used with virtually all thin-walled metals.
The standard versions include the centerdrill short and long models. They differ only in the length of the cylindrical part; the angle of the conical part is identical. When using these versions the material displaced against the direction of feed remains on the surface of the workpart and forms a collar.
Both models are also available in the flat version, with cutters ground into the belt that remove the collar in the same operation, resulting in a smooth surface.
For further details and more information, please visit our website.
|
|
METRIC SIZES from 3mm to and including 16mm
SGS Tool Company adds to its High Performance Drill line with the introduction of Ice-Carb, an Internal Coolant Drill for drilling depths up to 7 x Diameter.
ICe-Carb%u2019s unique geometry features enhance coolant flow and chip removal. Each tool comes with SGS%u2019 exclusive Ti-NAMITE-A (AlTiN) tool coating for higher thermal stability and greater wear resistance in deep hole drilling.
The tool%u2019s drilling depth potential eliminates the need for pecking in most applications and the corner protection increases tool life.
|
|
ENGINEERED HARDFACING :
Shaped carbide, either discs or stars, are brazed onto drilling tools that are used to cut steel casing or to help remove down-hole junk.
|
|
Solide carbide drills
Coated and uncoated high-performance drills for both dry and wet drilling applications
|
|
Solid Carbide Drilling
KMT high performance HP Solid Carbide Drills offer the highest metal removal rate in the industry. Bottom line savings from increased speed can result in cost savings up to 50% versus competitor's products. With through coolant diameter ranges from 3,00 mm to 21,00 mm (.118" to 1.011"), the HP drill series is application specific in steel, stainless steel and high temperature alloys, and iron.
210/211/212 HP KC7515
For stainless steel and high temperature alloys.
224/225 HP KC7315
Ultra high speed drilling
254/255/256HPC KC7315
Excellent hole quality in regards to straightness ...
|
|
|
The Miller high-performance drilling tools fit perfectly into the HPC philosophy of the MAPAL Group. The Mega Drill drilling tool series provides high-performance tools for solid drilling. Special cutting edge geometries which are well-suited to the material to be machined ensure technological advantages and the excellent economic efficiency of all solid carbide drilling tools. Besides the extensive standard product range also special tooling solutions for special applications can be provided.
|
|
PCB Drills
Micron -Drills, designed for drilling printed circuit boards, play significant roles for developing electronics-related industry. They promise high-precision and high-efficiency drilling of various circuit boards with long tool life, including multilayer boards. Tungaloy’s advanced technology, with development and manufacturing of carbide materials for drills, does not allow competitors to imitate.
|
|
BENEFITS:
- 2xØ and 3xØ for all sizes
- Large, reinforced helical flutes.
- Through tool coolant
- KAB6 connection for drilling all diameters up to 2 1/2" on 40 or 50 taper machining centers.
- Standard WCMX carbide inserts
- Coolant inducers and adjustable holders standard.
|
|
|
These compacts are also used to prevent rubbing wear on steel surfaces and where it is more economical to drill less precision holes.
|
|
Sandvik Coromant's drilling programme offers a wide range of high performance drilling products.
Regardless of the hole style - we can offer you the right tool for the best productivity in a wide diameter range. Both solid carbide drills and indexable insert drills are available.
Sandvik Coromant also offer drills for deep holes up to 150 times the diameter in a wide diameter range in the Ejector and STS systems. Double your productivity with the new unique CoroDrill 800.
With Tailor Made and Special drills included the programme offers unlimited possibilities.
|
|
Holeshot® OTM™ Tools
Maximize your productivity and lower your cost per cut with OTM™ quality and variety.
- Grades
- Holeshot® Drills
- Coremaster® Coredrills
- WCMX & WCGT Inserts
- Stinger™ Drills
- Counterbores
- Countersinks
- TCMT Inserts
- End Mills
- Chamfer Mills
- Face Mills
- XPMT Inserts
- Aluminum Cutting Mills
- APET Inserts
|
|
Quad-Drill line now includes 9 standard sizes, all larger than 2 inches
Up to 30% more productivity than the drills they replaced
All sizes have 4 insert stations
Currently offered in 2:1 length-to-diameter ratios
3:1 lengths coming soon
|
|
|
The highly polished open flute not only allows for easier chip formation and evacuation, but also provides for a sharper cutting edge that delivers a better edge finish on a variety of materials. Our premium micro grain carbide allows for superb wear resistance and tool strength. Special point geometry contributes to improved bottom finish and plunging capabilities. Tools are available in upcut and downcut versions from 1/16" through 3/8" diameters.
|
|
|
|
|
|
feedMAX - Solid Carbide Drills
Highest productivity with Seco solid carbide drill. Due to the new superior quality drill Seco can help you improve your productivity by as much as 100%. Saving money and time. feedMAX offering drills in diameter range 3-20 mm. The self-centring geometry gives quality holes without pre- or finishing operations necessary. The low friction TiAlN coating secures good performance in a wide range of materials as well as an exceptional tool life. The high productivity together with the long tool life gives excellent total machining economy when using feedMAX solid Carbide drill.
Brazed Carbide Tipped Drills
Brazed carbide tipped drills in diameters 9,85-32,10 mm for drilling quality holes without any finishing operations. Self centring geometry with a TiN coated P25 micro grain carbide gives good chip control and tool life in most workpiece materials.
Coolant through the drills for safe chip evacuation.
Seco CrownLoc
Drill precision holes at low cost in the hole diameter range from 12 to 25,99 mm with Seco CrownLoc. The exchangable crowns cut all your regrinding costs. With every change of crown, a new one guarantees long and predictable tool life. Exchangable crowns also allow for high cutting speeds reducing machining cost. Optimised geometries for different workpiece materials; steel, stainless steel and cast iron, complete the advantages with the CrownLoc system.
Perfomax Indexable Drills
The Perfomax range of indexable drills, in diameters 15-80 mm, is based on long experience and the very latest technological advances in drilling. Strong square inserts for good machining economy, a rigid drill body and good chip flow enable the drills to handle high metal removal rates. The drills can be used both in rotating and non-rotating applications. A unique chip path configuration reduces noise and vibration. Drilling depths from 2 x D to 5 x D.
|
|
The all-surface tool for plunging, drilling, grooving and more.
- Multi-Function Cutter: Center cutting capability allows drilling of holes as well as other operations such as channeling, contouring, shouldering and ramping.
- 2 Identical Inserts - 2 Effective Teeth: Cutter designed with two identical trapezoidal inserts, allowing for two effective cutting edges when plunging and endmilling.
- Great Strength: Insert geometry designed for applications in high strength tool steels. Our VP5020 grade (PVD coated micrograin carbide) is highly resistant to wear and thermal shock.
- No Interference with the Part Being Machined: The cutting diameters of the cutters are intentionally made larger than the shank diameters.
- Greater Rigidity with Large Overhangs: Plunging, a milling operation along the Z-axis only, minimizes the flexing of the cutters and allows a greater overhang than can be realized with conventional milling in the X and Y axis.
|
|
"SLICK" Twist Drills for composite materials and Titanium
HTT patented “Slick” Drills are micrograin solid carbide twist drills designed for Drilling – Reaming – Countersinking in one operation (“One Up”) composite materials (AL/AL - AL/Ti - CFRP/AL - CFRP/Ti - Ti/CFRP - CFRP - Ti/Inconel). “One Up” operations offer the following benefits:
Reduction of the quantity of tools and production phases
Costs reduction
Operation Time reduction
Improvement of surface finish quality
“Slick” Twist Drills are of three fundamental types:
- For CNC machines
- For semi automatic machines (PV Tools, pneumatic tools with constant feed per revolution)
- Hand operated twist drills (with a pre-hole that enables you to obtain a finished ½” bore in one operation instead of using 8 different drills and bore processes)
|
|
The new generation of the extra large solid carbide drills up to 40 x D.
Drilling tools in solid carbide, diamond and cermets
With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
The CoroDrill 805 makes it possible to drill deep holes without moving the workpiece to a dedicated deep hole drilling machine i.e. all operations can be completed in one set-up.
Deep holes can be performed with high productivity and reliability achieving a hole quality comparable with traditional deep hole drilling. Another advantage is that no extra pump capacity is required.
CoroDrill 805 carries the same standard inserts as CoroDrill 800.
Deep holes are defined by a high ratio between hole depth and hole diameter. Deep hole drilling is the preffered method for drilling hole depths of more than 10 x the diameter up to 150 x diameter. Sandvik Coromant are a world leading manufacturer of deep hole drilling systems.
|
|
Deep Drilling
Operation with 1700 cycles granted.
These HTT gun drills are specifically designed for sferoidal cast iron and can be supplied with or without coolant holes. Surface coatings: PVD or CVD.
Range of diameters: 6-20 mm
|
|
The use of the highly wear and oxidation resistant Miracle Coating achieves long tool life at extreme feed rates or during high temperature conditions experienced during deep drilling operations.
This range of drills achieves state of the art performance and hole precision even under the toughest cutting conditions.
Ask our experts more. MPS drills on demonstration every day at EMO, Mitsubishi Materials, Hall 5, Stand D20.
Available from Ø3.0 – Ø20 l/d x 3, and up to l/d 30 for diameters up to 10mm.
|
|
Polycristalline diamond tools for optimal tool life and highly precise holes.
Drilling tools in solid carbide, diamond and cermets
With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
PCD equipped tools prove their efficiency especially for high-speed cutting applications. This cutting material usually demands high rpm, which means that the machining times are reduced substantially. Compared to the common solid carbide drilling tools very high tool lives are achieved due to the hardness of PCD tools.
Further advantages are excellent surface qualities, high cutting volume, and high thermal conductivity.
|
|
|
|
