|
|
HAUG PISTON COMPRESSORS FOR OIL-FREE COMPRESSED AIR
HAUG guarantees technically and economically optimal solutions for compressed air supply, with the security of a constant oil-free quality of the compressed air.
Universal ways of operation
Due to the dry-running technology the HAUG piston compressors can be out of operation, without causing any problem compared to lubricated-compressors and screw compressors. Operation in idle run mode is not required.
Universal application for:
· Continuous operation
· Intermittent operation
· Emergency or reserve operation
|
|
HOT OIL
Hot oil and fire retardant belt
Hot, potentially flammable products
Products containing oil & fat
Ideal for cattle feed & products with high fat content
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
Wellhead control units (DHSV / MV / WV / BOP / ESD)
Hydraulic test units
Gas test units
Chemical injection units
Pressure range up to 30,000 psi
Valves, fittings, tubing according to NACE
|
|
Customized hydraulic power packs, and power packs with submerged motors
A creative manufacturer of Brevini Fluid Power Group, the main characteristic of OLEODINAMICA REGGIANA is to establish a closed partnership with his customers.
This co-operation begins as hydraulic project advising, up to the production and supply, from concept to completion.
Thanks to our customized production, the application field can be in mobile sector (hydraulic truck gates, preparations for industrial body shops etc.) or in industrial sector (presses, lifts for disabled, loading ramps etc.).
Our range of products is completed with, in-line valves, fittings and flexible hoses. All our products are strictly tested for efficiency and reliability.
|
|
MAMCO/LEFOO LF-20 PRESSURE SWITCH
Because of its special internal design this switch can tolerate high pressure spikes inherent on many pressure systems. The switch is factory calibrated but in the case that adjustment is needed in the field the switch offers an adjustment screw to facilitate any fine tuning required. The standard diaphragm employed by Mamco is polyimide (Kapton) making it compatible with many gases and liquids. Several other diaphragm materials are available that make the switch compatible with many mediums. Various electrical terminations are available including ¼ tabs and a metric-pack connector that forms a tight seal when connected.
Because of their ruggedness the Mamco LF-20 is a popular choice for the many OEM applications. |
|
| ... products without technical information |
| |
| Dinamic Oil is available to evaluate, design and produce special winches driven hydraulically or electrically, according to our customer's specific requests. The product will be personalized to completely satisfy the technical and dimensional requirements of the application; the use of standard products guarantees an economical solution of high quality, reliability and performance. |
|
Dinamic Oil has developed a complete range of products dedicated to the tower crane industry: slewing gearboxes, lifting winches and carrousel translation drives. Dinamic Oil has proposed a solution to each of these crane drives by realizing a dedicated product according to the markets requirements.
|
|
| The particularity of Dinamic Oil's pulling winches is the design of independent modular blocks (hydraulic motor, negative disc brake and planetary reduction step). This concept guarantees a high reliability and simplicity of use that satisfies the requirements of the end user and facilitates the installation and maintenance work. |
|
| Dinamic Oil is available to evaluate, design and produce special winches driven hydraulically or electrically, according to our customer's specific requests. The product will be personalized to completely satisfy the technical and dimensional requirements of the application; the use of standard products guarantees an economical solution of high quality, reliability and performance. |
|
... see all the products in the category
Winches
|
| In line or bevel planetary gearboxes with flange, foot or pendular mounting in mobile or industrial applications. Nominal Output torques vary from 100 daNm to 130.000 daNm. |
|
| Rotating case gearboxes, complete with static negative disc brakes, offer the best of both our planetary gearboxes and hydraulic lifting winches. Nominal output torque values range from 4.000 Nm to 50.000 Nm. |
|
| Gearboxes complete with reinforced output supports, integral pinion, static negative disc brake and input coupling for hydraulic motors; nominal output torques range from 4.100 Nm to 60.000 Nm. |
|
| Complete with ring gear, worm gear, bearings and orbit motor. Thanks to its high performances, the rotary table is a compact, simple and economical solution for the rotation drive of small cranes and aerial platforms. |
|
| Radial piston motors with fixed displacements from 100cc to 2200cc for industrial applications that require high torque and efficiencies at low speeds. |
|
| Planetary drives and gearboxes with rotating cases for the movement of wheeled or tracked vehicles. Available with static negative disc brakes, freewheel options and valves. Transmissible torques range from 80daNm to 370 daNm, radial load capacity up to 8000 kg. |
|
Molded-Oil™ Bearings
Environmentally friendly Molded-Oil™ Bearings offer
high performance in water- and dust-contaminated
environments. Enhanced lubricant strength makes these
ever-evolving bearings ideal for high-speed operation.
|
|
|
|
