Bronze pumps

Flow: 1.5 m³/h - 716 m³/h
Pressure: 0 bar - 16 bar
Head: 1 m - 160 m

Single-stage close-coupled volute casing pump, with ratings to EN 733, with replaceable shaft sleeve and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance ...

Flow: 900 m³/h
Pressure: 100 bar
Head: 800 m

ANDRITZ innovative submersible pumps are the response to extremely stringent demands for operational reliability, service life, and efficiency. Thousands of submersible pumps have been installed around ...

Pressure: 0 bar - 320 bar

... benefiting from the best combination of reactors and pump flanges from both a technical and economical perspective. The new gear geometries facilitate differential pressures of up to 320 bar for selected pump ...

Flow: 350 l/s
Head: 130 m
Power: 240 kW

... cast iron or bronze with impellers keyed onto the stainless steel shaft. Their design makes them especially suited for lifting water containing sand. E20S-E22S ELECTRIC MIXED FLOW BOREHOLE PUMPS Electric ...

Flow: 0 m³/h - 10 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 12 m

Three Speed Circulation Pumps XPS Model:XPS The following is about Three Speed Circulation Pumps XPS related XPS, I hope to help you better understand Three Speed Circulation Pumps ...

Flow: 0 m³/h - 792 m³/h
Head: 0 m - 25 m

... mm FEATURES • High grade cast iron casings and bronze impellers • Proven long lifetime performance in industry • Hand built in England with British castings and European Motors • Every pump ...

Flow: 302 l/min - 1,043 l/min
Pressure: 8.6, 12.1 bar
Fluid temperature: -32 °C - 191 °C

... agitation of the fluid. TXV pumps delivers more fluid per revolution than comparably ported gear pumps. And slower operating speeds mean longer service life and reduced maintenance requirements. These ...

Flow: 3 ft³/h - 1,817 ft³/h
Head: 1.5 m - 88 m

Fairbanks Nijhuis submersible dry-pit solids handling pumps have over 40 years of proven experience in the pumping of solids, slurries, sludge, pulp, trash, sewage and grit. These pumps are specifically ...

Flow: 150 us gal/min - 8,000 us gal/min

Pentair Commercial Pool and Spa now offers the new Aurora 3800 Series End Suction and the 410 Series Split Case Pumps for commercial pools, spas, and other water applications. The 3800 and 410 Series are available in ...

Flow: 0 m³/h - 7,000 m³/h
Power: 255 kW

... Pumping of turbid or slightly contaminated liquids. Cooling pumps in power stations Conventional thermal plants Sea water pumping. Industry Aquaculture farms Theme parks Materials Pump ...

Flow: 28 m³/h
Head: 8 m
Power: 1.1 kW

BADU GREEN Pumps are developed with the aims of saving energy and protecting the environment. Made from very high value bronze alloy, this circulation pump is extremely corrosion resistant ...

Flow: 30 us gal/min - 10,000 us gal/min
Pressure: 80 psi - 290 psi

Vertical Turbine pumps. Flow - 300 USGPM to 10,000 USGPM Head - 80 PSI to 290psi MOC - Cast Iron / Ductile Iron / SS304 or 316 / Super Duplex SS / Ni Aluminum Bronze Primer - Electric and Diesel Engine.

Flow: 35 us gal/min - 80 us gal/min
Pressure: 0 psi - 300 psi

... Series Pump is a positive-displacement pump built specifically to address the demanding requirements of foam concentrate and water mist stationary and mobile fire protection systems. Key Features ...

Flow: 0.15 m³/h - 30 m³/h

Rotary Gear Pump -Manufacturer, Expoter, Supplier Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FT” (Rotary Gear Pumps) which is self priming, foot mounting type positive ...

Flow: 0 m³/h - 2,800 m³/h
Pressure: 10 bar - 30 bar
Head: 0 m - 420 m

... Multi-stage, vertical or horizontal type, end-suction pump is the norm, inline, double suction split volute casing pumps can be manufactured. • Permanent replacement can be produced upon request and ...

Flow: 6 m³/h
Pressure: 6 bar

The R cast iron and bronze wobble pumps from Nova Rotors are manufactured with a condensed and linear design. They provide operators with the performance that is at par with what they cost. These units ...

Flow: 0 m³/h - 4,000 m³/h
Pressure: 0 bar - 20 bar
Head: 0 m - 200 m

The North Ridge Pump as Turbine (PAT) system is an innovation in pump technology. It allows the pump to run in reverse as a turbine to harness any wasted energy in the system to generate ...

Flow: 0 l/min - 80 l/min
Head: 9 m
Power: 250 W

Marine Rubber Impeller Pump MF Series MF-2524 Long Durability "REVOLVEX PUMP" • Compact design and can be removed on the deck easily. • Small and compact, but, ...

Flow: 0 m³/h - 156 m³/h
Head: 0 m - 100 m
Power: 1.5 kW - 11 kW

The pump casing shall have material of construction of Cast Iron FG 260 (standard supply), Bronze LTB2, CF8, CF8M, axial suction and radial discharge port, dynamically balanced impeller, steel shaft, ...

Flow: 0 m³/h - 10.8 m³/h
Head: 20 m - 92.5 m
Power: 0.55 kW - 5.5 kW

... chemically pure liquids and free of foreign matters, with temperatures not higher than 80°C. PUMP: Horizontal axis pump with bronze closed impeller, pump body and ...

Flow: 29.01, 6.23, 9.3, 15.69, 4.13 l/min
Pressure: 818, 457, 1,841, 1,288, 230 bar
Length: 464 mm

... displacement pump with a directly coupled, integral linear reciprocating air motor. Compact in size, minimal weight and ability to operate in many environments. Double Acting Series Hydratron Double ...

Flow: 3 m³/h - 3,000 m³/h
Head: 0 m - 150 m

... 1450RPM,980RPM. Max head: 150M Medium Temperature: -20℃~80℃ Material: Cast iron-HT200,HT250;SS304,SS316,SS306L,Duplex SS,Bronze; Motor: 380V,415V,660V;IP54,IP55;50HZ,60HZ;

Flow: 45 m³/h
Pressure: 30 bar
Head: 300 m

TS pumps Multistage centrifugal pumps with closed impellers TS. Discharge sizes from DN 32 to DN 50. TS 31-32 range is only available with mechanical seal, TS 40-50 range is available both with mechanical ...

Flow: 0 l/min - 1,000 l/min
Power: 0.25 kW - 22.5 kW

... ring pumps, selfpriming and reversible, suitable for the transfer of clear liquids, without any solid parts in suspension. The pumps are available both made of stainless steel AISI 316 and bronze. ...

Flow: 0 m³/h - 3,500 m³/h
Head: 0 m - 105 m

... priming centrifugal pump that is suitable in applications such as clean water, seawater, brines and alkaline liquids in water supply, dust extracting and spray-coating plants, etc, in thermal range of up to +90°C (+140°F). ...