|
|
Mink round brushes - Highly efficient tools with countless applications
Mink round brushes can be applied to solve problems in a wide range of areas, and our engineers have the ideas to exploit this potential. When it comes to flexibility, no industrial tool can match these brushes. We offer a huge selection of models: roller brushes (with stub shafts), round brushes (with hollow centre spindle, no shaft), the Mink HP-System (two half segments, without shaft) and the Mink Zick-Zack-System (modules, with or without shaft). Finally, there are Mink web spreader brush rolls for modern processing of plastic film, textiles and many other kinds of web.
Advantages:
• Suitable for goods of all kinds
• Versatile and economical
• Maximum cleaning power combined with optimum surface care
• Form and stiffness according to individual requirements
• Less need for cleaning agents thanks to the mechanical action of the bristles – economic and ecological benefits
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
Mink standard strip brushes (STL) – Brushes from stock for fast, effective solutions
The problems that come up in everyday practice are often very much alike. For this reason, we’ve put together a collection comprising more than 6,000 of the most frequently used strip brushes, which we keep in stock for delivery on short notice. This means that you can profit from our many decades of experience, get deliveries within seven working days, and enjoy low prices.
Advantages:
• Unbeatable prompt delivery, low prices
• Special bristles for high temperatures
• Dependable protection against contamination
|
|
Mink Vee-belt brushes (BKR) – Moderate prices and prompt delivery
Mink Vee-belt brushes are resistant to dust, dirt, moisture, oil, grease and common chemicals. Moreover, they’re ideal for use in small spaces. They can be supplied in both open-ended and endless versions. And because we know that you never like to wait, we keep the most important types in stock. They’re inexpensive and can be delivered promptly.
Advantages:
• Practical solutions for immediate use
• Extremely rugged
• Working temperatures: -15°C to +80°C
• Belt speeds up to: 20 m/sec.
|
|
Short description:
These tools are designed for manual and automated finishing machinery used in extrusion, automotive, powdered metal, fineblanking and other industrial deburring applications. The smaller diameter brushes can be used on hand tools for the surface preparation of a variety of materials. Our stock brushes include diameters from 3" to 27". We also have the capability of providing customized products for a wide variety of applications.
|
|
Circular Discs
These brushes are especially used for cleaning, polishing or deburring. Their applications are best suited to the treatment of metal, for the cleaning of large surfaces, as used in the construction industry. The body is made of either plastic, wood or metal. The filling material may be chosen according to the task requirements. The density of the filling material can be varied by the diameter and the distance of and from the hole.
|
|
Abrasive grit impregnated into the extruded nylon filament allows an abrasive nylon brush to perform deburring, edge blending, and surface finishing. These brushes are available in a variety of styles including wheel, cup, end, mandrel mounted, and cylinder.
Use the Abrasive Nylon when you have threaded bores, uneven O.D.'s or simply need a lighter finish.
|
|
Short description:
Our technical staff can design a brush that is matched to both your equipment mounting configuration(s) and your specific deburring applications. If you have a profile that s giving you headaches, we can design a built-to-profile brush using your wheel and a cross-section CAD drawing. A fitted brush requires less dressing-in and makes better contact for more efficient burr removal.
|
|
Mink round brushes from stock (RUB) - Stock products for fast results
Whether you need small or large quantities, Mink can deliver round brushes to you from stock – quickly, inexpensively and in consistently high quality. In this way, you can get instant solutions to many problems that come up in day-to-day work. When special demands arise, we’ll be happy to make our full range of services available. Our engineers will provide individual advice, and we can make modifications to standard brushes or manufacture special products to fit your needs.
Advantages:
• Instant solutions to your problems
• Protection of surfaces against damage, reduced need for cleaning additives
• Gentle transfer of freshly painted products
• Hygienic application of icings, plus many other applications
|
|
|
They work in machines and are used for clearing, cleaning, insulating and discharging electric charges etc. Various body materials are possible: including wood, metal and plastic. The materials for the bristles can be from the finest horsehair to the firmest steel wire. The density of the filling material can be varied by the diameter and the distance of and from the hole.
|
|
|
Available in sizes as small as .024" diameters, these brushes are available in stainless steel, carbon steel, brass, nylon and abrasive nylon. These brushes are ideal for micro burr removal, internal cleaning, removal of small imperfections and surface preparation.
|
|
These brushes are varied for many different uses: not only for cleaning of tubes, gratings, sleeves and cylinders. Industrial batch fabrication requires individual adapted tools, what we offer with our Interior Brushes. The diameter of these brushes can be matched on 1/10 millimetre exact. Interior Brushes are available with a variety of different filling materials.
The micro-abrasive brushes on the left side are used for deburring cross drillings and cleaning heatings. Through our know-how and equipment we are able to offer attractive proposition for manufacturers of boilers.
|
|
The Chevron secondary belt cleaner uses the speed and force of the belt rolling over our patented rubber disks. The unique rotary fingers are forced against the base of the chevrons to dislodge material from the belt.
- Sweeping Action - of each disk cleans in front of and behind each and every chevron.
- Easy Maintenance - no motors, air nozzles, or other problematic equipment to maintain.
- Works Great - in the pulp and paper, fertilizer, potash, and other bulk material industries where chevron style belts are heavily used.
- Solid or Notched - 8” (200mm) diameter abrasion resistant rubber disks are available depending on the height of the chevrons and the conveyor belt speed.
|
|
|
Strip brushes are mainly used as cover in association with moving parts. They insulate doors and windows or help to keep moving parts on machines clean. There are many forms and profiles, with or without holders. Therefore, please indicate full measurements and holder details when ordering. The profile can be made of steel, aluminium or plastic. The filling material can be bristles or steel wire. For more details please use the enquiry form.
|
|
Mink special brushes (SOB) – Showing our full potential
Machines and systems that do special work require specially made products. We’ll provide the best possible support for your projects and designs in all the relevant applications: conveying, gliding, guiding, cleaning, washing, dusting, sealing or removing static. Long or short brushes, hard or soft bristles, special colour or standard, we’ll make it possible. With our many years of experience in a wide range of industries, we can come up with the right ideas and implement them economically.
Advantages:
• Special dimensions, special shapes, special requests of any kind
• Example: Mink panel brushes – for preventing scratches during assembly and for gentle conveyance in metal processing machines
• Example: Mink ostrich feather rollers – unsurpassed softness, for reliable dusting
• Example: Mink transfer roller brushes – an alternative to steel and plastic rollers
|
|
|
Tube brushes are made in carbon steel, stainless steel, nylon, brass or natural filaments. Usually cut for power, they are ideal for cleaning applications to remove chips, oil, dirt, rust and corrosion from inside holes. The brushes are designed for both thru hole or closed hole applications and can have a ring handle or plastic handle added for hand applications.
|
|
|
These brushes are varied for many different uses: not only for cleaning of tubes, gratings, sleeves and cylinders. Interior brushes regulate current velocity in tubing systems. They are similar to the double spiral tube brushes for deburring cross drillings etc.
|
|
Hand Brushes, Spark Plug Brushes and Fine Brushes
Good partners
Hand Brushes are used everywhere, in the metal industry, construction work, in the workshop... They are found in every tool box. The complete range contains all types of filling materials, from coarse steel to the finest brass wire. The handles are made of beech wood with two hanging holes. All hand brushes have a bar code stamp. For special applications we recommend hand brushes with plastic body. For example the Brake Caliper Brushes ROKI or our hand brushes for the food industry.
Spark plug brushes and Fine brushes are the perfect tool for fine brush applications.
|
|
|
Flexco Chevron Belt Cleaner takes a new approach to cleaning chevron, cleated, and raised rib belts. Hundreds of rubber fingers create a rotary cleaning action that easily flicks carryback off the belt. And without the typical clogging and rapid wear problems associated with brush-type cleaners. Now there is a better solution for wet sand belts, wood chip belts and other raised top or grooved belts.
|
|
OSBORN TOP - Power Brushes for Industrial Applications
One of our core competences is the integration of brushes into plant engineering processes. Engineering and development, as well as the high product quality standard, guarantee optimal performance in production processes.
OSBORN offers products perfectly matched for each type of application meeting all requirements in regard of functionality, safety and efficiency during operation.
OSBORN offers a wide range of brushes and abrasives that are developed and made for the specific needs of the user – from work piece cleaning to complex tasks of surface treatment.
|
|
OSBORN PRO Brush Range
With the comprehensive PRO brush range OSBORN International offers customers the opportunity to access the widest range of professional products which -experience tells- will satisfy the majority of applications, while still offfering individual solutions where our standard is not appropriate.
OSBORN International offers itself as a partner who understands your problems and who possesses the necessary know-how to supply efficient solutions. Up to date production methods, international exchange of applications and detailed analysis of customer requirements allow us to maintain the highest quality standards and to improve the technological advantages we offer.
When talking industrial brushes, or more accurately flexible surface processing tools, OSBORN is not only the premier world partner for industry but also for engineers, merchants, wholesalers and retail and trade channels.
|
|
Brush material Characteristics Application
Fine cotton Natural product Glossing, polishing, dusting off
Plucked Used with compounds
Very adaptable
|
|
Key Features:
- Sturdy, self-centering system
- Flexible filaments are engineered to provide the correct pressure to create an ideal hone - bore after bore
- Rigid abrasive media is firmly attached to the end of the flexible filaments making the tool excellent for tough cross-hole deburring and edge radiusing applications
- Available for hole diameters ranging from 6.4mm to 203mm
- Grit choices are available in Silicon Carbide & Aluminum Oxide from 60 through 320
|
|
|
|
|
|
Model TBF abrasive brush
Abrasive brushes mounted on resin supports.
Ideal for clients looking for more aggressive, durable brushes.
The TBF system is designed to provide the brush with perfect harmony between durability and flexibility.
The studied diameter of our bundles, combined with the right inclinations and degradations provide our brush with perfect adaptability to the contour of the wheel rim, brushing its entire surface perfectly, including the corners of the hard-to-access windows.
Our TBF system is especially recommended for companies that have large production lines.
The brushes are supplied in different types of anchoring, depending on the needs of each client.
In addition, given the high quality of the filaments used, the brush is very long-lasting, avoiding unnecessary changes and stops in the machine.
Think no further, Kumex TBF brushes are the best choice for high quality production...
Available for wheel rims with the following diameters: 13" - 14" - 15" - 16" - 17" - 18" - 19" - 20" - 22"
Also produced in maximum density for the external part of the wheel rim.
|
|
|
Disc brushes are among KULLEN's most interesting products. They are used in industry as a rotating tool. Their quality is as reliable as the dependability of our choice of the right disc brush for your requirements. We guarantee this by manufacturing them on semi-automatic and automatic CNC machines. In addition to quality, we assure you of individual treatment - quality is inplicit and as you need we produce individual brushes for you. Disc brushes come in a wide variety of plastic, metal and wooden cores and bristle materials.
|
|
SIC and Diamond Abrasive Brushes for aging and burnishing of marble, granite, agglomerate, ceramics and stone in general.
Our vast range of products includes all market formats, and we are prepared to develop any of our clients’ demands.
At Kumex®, we offer the right balance between quality and price, supplying practically 80% of the European market.
We not only offer our clients a wide range of products, but also the possibility of developing exclusive products for very specific needs. To do so, we put at our clients’ disposal our extensive experience in the finishing industry and the cutting edge technology of our machinery.
Enabling us to manufacture our products, we have the market’s most advanced materials and cutting edge technology.
We can produce brushes with Diamond, SIC, Stainless Steel, Ceramic and our innovative Coex-R® filaments.
To know more about our filaments, diameters, geometries, percentages, etc., please consult our filaments section, in the products section.
|
|
|
Cubitron™ abrasive provides high cut while the flexible plastic brings superior cleaning to a wide variety of surface areas, without damaging the work piece. Eliminates flying wires common with traditional wire brushes.
|
|
|
|
