|
|
|
|
|
|
New D&A Hydraulic Breaker Enhanced Strength and Complete Customer Satisfaction
- Noise Protector : less noise
- Cushion Damper : Absorbs repercussion from hammering and increases carrier endurance
- Roomier Gas Chamber : Ensures higher impact power
- Stroke Adjuster : Maximize productivity from variable speed control (D&A 70V-550V)
- Main valve : Internal control valve system is more efficient by 10% to 15% than other breaker's valve, stays cooler and makes the quicker and harder-hitting
- Auto-Lubrication System : Available to install auto-Lubrication or centralizing lubrication kit (over D&A 100V - 550V)
- Accumulator installed (from D&A 30V~) : Less stress to hydraulic components as absorbing pressure fluctuation / Increases efficiency by replenishing short oil flow
- Rock dragger with anti-abrasion steel : used anti-abrasion steel (Hardox steel)
- Wide Chisel pin : safe from abnormal wearing
- Piston : Higher impact power with long stroke
- Well heat-treated tool : Longer life by good material / Safe from blank fire
- Upgraded Through bolt
|
|
|
|
|
|
New D&A Hydraulic Breaker Enhanced Strength and Complete Customer Satisfaction
- Noise Protector : less noise
- Cushion Damper : Absorbs repercussion from hammering and increases carrier endurance
- Roomier Gas Chamber : Ensures higher impact power
- Stroke Adjuster : Maximize productivity from variable speed control (D&A 70V-550V)
- Main valve : Internal control valve system is more efficient by 10% to 15% than other breaker's valve, stays cooler and makes the quicker and harder-hitting
- Auto-Lubrication System : Available to install auto-Lubrication or centralizing lubrication kit (over D&A 100V - 550V)
- Accumulator installed (from D&A 30V~) : Less stress to hydraulic components as absorbing pressure fluctuation / Increases efficiency by replenishing short oil flow
- Rock dragger with anti-abrasion steel : used anti-abrasion steel (Hardox steel)
- Wide Chisel pin : safe from abnormal wearing
- Piston : Higher impact power with long stroke
- Well heat-treated tool : Longer life by good material / Safe from blank fire
- Upgraded Through bolt
|
|
|
|
|
|
New D&A Hydraulic Breaker Enhanced Strength and Complete Customer Satisfaction
- Noise Protector : less noise
- Cushion Damper : Absorbs repercussion from hammering and increases carrier endurance
- Roomier Gas Chamber : Ensures higher impact power
- Stroke Adjuster : Maximize productivity from variable speed control (D&A 70V-550V)
- Main valve : Internal control valve system is more efficient by 10% to 15% than other breaker's valve, stays cooler and makes the quicker and harder-hitting
- Auto-Lubrication System : Available to install auto-Lubrication or centralizing lubrication kit (over D&A 100V - 550V)
- Accumulator installed (from D&A 30V~) : Less stress to hydraulic components as absorbing pressure fluctuation / Increases efficiency by replenishing short oil flow
- Rock dragger with anti-abrasion steel : used anti-abrasion steel (Hardox steel)
- Wide Chisel pin : safe from abnormal wearing
- Piston : Higher impact power with long stroke
- Well heat-treated tool : Longer life by good material / Safe from blank fire
- Upgraded Through bolt
|
|
Hammers SH - Medium Standard Series
590 kg - 1390 kg
Wide range of hydraulic hammers for excavators from 1 to 70 tons. The SH series is characterized on classic models distributed for more than twenty years and therefore super-tested. The SH series is ideal for who tries a product of quality with convenienent price.
|
|
Hammers XP - Heavy Series
2350 kg - 4380 kg
Range of hammers from 0.8 to 70 tons. Thanks to the high back pressure up to 25 Bar, the hammers of XP series can be installed on the modern excavators, with no need to change the hydraulic system.
Supplied of underwater and tunnel kits.
|
|
Hammers SH - Light Standard Series
90 kg - 390 kg
Wide range of hydraulic hammers for excavators from 1 to 70 tons. The SH series is characterized on classic models distributed for more than twenty years and therefore super-tested. The SH series is ideal for who tries a product of quality with convenienent price.
|
|
Hammers XP - Light series
70 kg - 565 kg
Range of hammers from 0.8 to 70 tons. Thanks to the high back pressure up to 25 Bar, the hammers of XP series can be installed on the modern excavators, with no need to change the hydraulic system.
Supplied of underwater and tunnel kits.
|
|
Hammers XP - Medium series
750 kg - 1700 kg
Range of hammers from 0.8 to 70 tons. Thanks to the high back pressure up to 25 Bar, the hammers of XP series can be installed on the modern excavators, with no need to change the hydraulic system.
Supplied of underwater and tunnel kits.
|
|
|
|
|
|
Hydraulic broken hammer Introduction
SWH Hydraulic Breaker can transform the hydraulic energy to mechanical impacting energy. Featured with high efficiency and low operating costs and high reliability, it mainly takes excavators, loaders or other hydraulic machinery for the carrying equipment. It is widely used in urban construction, mining, smelting, transportation, utilities and other construction. The research, design and test of special hydraulic mechanism of hydraulic impacting machines have long-term theoretical research and engineering practices for Sunward Intelligent. The hydraulic breaker under company independent development and research of the company features with innovative structure, high efficiency and low operating costs. Not only working with excavators loaders of various standards and other ancillary use, the company also develops new complete sets of equipment in accordance with users’ need for a series of mine wellhead and nonferrous metal smelting, blast furnace iron making, and other special breakings.
|
|
Our hydraulic breakers are designed to perform and built to last, combining high impact energy with maximum dependability.
Features:
noise and vibration damping
maximum/high availability
maximum/high productivity
Applications:
road construction
building renovation
primary and secondary breaking in quarries
demolition
tunneling
trenching
foundation work
landscape gardening and landscaping
|
|
Excavator attachment
A versatile accessory for excavators
High productivity
Quick-change facilities from rock breaking to cutting
Simple concept compact design
Wide range of application
High availability and little maintenance requirements
|
|
Shear (Hydraulic Motor Rotating)
360° degree free rotating system by hydraulic swivel motor.
Available to cut reinforced steel structures such as H-beam or I-beam.
Designed for scrap preparation and recycling in scrap yard.
Speed up valve can be installed at option.
|
|
Combi cutter which demolishes steel-frame buildings or concrete buildings with one machine.
・Main features
The main and jaw frame are made of high tensile strength cast steel for strength and light weight. The sharp cutter with large cutting force cuts heavy H steel easily.
The frame and jaw are tapered to design go into a narrow place easily.
A sharp giant center tooth gives a powerful crushing force.
Designed to crush a large concrete block in one stroke.
The tip tooth faces outward to ensure cramping of concrete piece.
A high speed valve is provided as standard equipment.
A large sliding piston rod guard is provided as standard equipment
|
|
|
|
|
|
SCRAP SHEAR - SH
FOR CUTTING METAL MATERIAL
The dedicated Mantovanibenne scrap shears are the most productive tools for all the metal processing requirements of the demolition site. Outstanding cutting forces make light work of steel sections, pipes, tanks, railway equipments etc. The powerful hydraulic cylinder develops a very high cut-ting force to cope with the toughest materials. Both the cylinder and the hoses are fully protected within the main frame of the shear. Continuous hydraulic rotation through 360° allows the attachment to be positioned quickly and accurately, tackling any type of demolition work.
Main features
Stick-mounted: choice from 8 models available for excavators from 2 to 80 t.
Bucket-mounted: choice from 8 models available for excavators from 4 to 125 t.
POWERVALVE, for the shortest cycle times. High speed Low pressure. Low
speed high pressure
Wide jaw opening
Removable and reversible cutters
All models are equipped with 360° hydraulic rotation
SH shears are constructed in hard wearing steel with high elastic limit which gives excellent resistance to abrasion with exceptional mechanical strength
Can be equipped with brackets for the Quick Coupler QC (QC is foreseen in the double version mechanical and hydraulic ) or with pinion brackets
|
|
Pliers - Shears
Series CP
400 kg - 3950 kg
A wide range of hydraulic multi-processors for 2 to 50 tons machines. Entirely made of anti-wear Hardox plate and available both with mechanic and hydraulic rotation. They are suitable for any kind of demolition of reinforced concrete structures. On some models is available the chipping kit.
|
|
Features:
good performance-to-weight ratio
quick positioning thanks to
mechanical 360° rotation unit
replaceable blades
optional pulverizing plates available
for CC 550
Applications:
light demolition work e.g. narrow
lightly reinforced concrete elements,
masonry
particularly effective for stripping out
and reconstructing interiors
|
|
Compactor
Simple operating device
Minimum maintenance
Fast, easy installation
No greasing required
High impulse force
Unique designed shock absorber
Auto oil flow & pressure control valve installed
|
|
The Atlas Copco range of hydraulic compactors covers a broad spectrum of applications and customer needs. They are designed for compacting soil, trenches and slopes and also for diving and extracting piles.
Atlas Copco's hydraulic compactors are much faster and easier to use than hand-held compactors - and therefore much more cost-efficient.
With rig-mounted hydraulic compactors from Atlas Copco, there is no need for personnel in the direct area of operations, thus reducing noise and safety risks. Work in trenches in particular is made safer.
|
|
Pliers - Shears
Serie CR
1800 kg - 2990 kg
A wide range of hydraulic multi-processors for 2 to 50 tons machines. Entirely made of anti-wear Hardox plate and available both with mechanic and hydraulic rotation. They are suitable for any kind of demolition of reinforced concrete structures. On some models is available the chipping kit.
|
|
Model 100
Energy level J 100.000
Energy level (ft.lbs) (73.756)
Weight t 5.5
Weight (lbs) (11.023)
Hydraulic pressure bar 180
Hydraulic pressure (psi) (2.321)
Hydraulic flow l/min 160
Hydraulic flow (gal/min-US) (42.3)
Min carrier-stick mount t 30 – 35
Min carrier-stick mount lbs 66.138-77.161
Min carrier-boom mount t 25 – 27
Min carrier-boom mount lbs 50.706-59.524
|
|
Model 400
Energy level J 400.000
Energy level (ft.lbs) (259.025)
Weight t 14.5
Weight (lbs) (319.670)
Hydraulic pressure bar 290
Hydraulic pressure (psi) (4.206)
Hydraulic flow l/min 260
Hydraulic flow (gal/min-US) (68.7)
Min carrier-stick mount t 65 – 70
Min carrier-stick mount lbs 143.300-154.323
Min carrier-boom mount t 50 – 60
Min carrier-boom mount lbs 110.213-132.277
|
|
Model 200
Energy level J 200.000
Energy level (ft.lbs) (147.512)
Weight t 10.0
Weight (lbs) (22.046)
Hydraulic pressure bar 215
Hydraulic pressure (psi) (3.118)
Hydraulic flow l/min 200
Hydraulic flow (gal/min-US) (52.8)
Min carrier-stick mount t 50 – 60
Min carrier-stick mount lbs 110.213-132.277
Min carrier-boom mount t 35 – 40
Min carrier-boom mount lbs 77.161-88.185
|
|
Model 80
Energy level J 80.000
Energy level (ft.lbs) (59.000)
Weight t 4.5
Weight (lbs) (8.818)
Hydraulic pressure bar 180
Hydraulic pressure (psi) (2321)
Hydraulic flow l/min 160
Hydraulic flow (gal/min-US) (42.3)
Min carrier-stick mount t 23 - 27
Min carrier-stick mount lbs 50.706 - 59.524
Min carrier-boom mount t 20 - 23
Min carrier-boom mount lbs 44.092 - 50.706
|
|
Northshore Manufacturing has a range of other grapples for scrap and lumber industries
Some are:
* 32" Waste - 280 Degree
* 32" Waste - Indexator
* 42" Municipal - 280 Degree
* 42" Municipal - Indexator
* 21" Trash Grapple
|
|
|
|
|
|
Selector Grabs
Our wide range of Selector Grabs are designed for use in a variety of applications and include demolition grabs,
waste transfer station sorting grabs, log grabs, rail grabs, rock grabs, pipe grabs and pylon grabs.
By design all our selector grabs are light in weight, yet strong and hard wearing. They are also universally interchangeable on any carrier at specified weight.
As standard the grabs have a powerful slew ring rotation system providing 360 degree hydraulic rotation, this enabling unlimited by directional movement for precise control.
For rail, log and pipe grabs we can also offer the choice of direct mount, free handling and hydraulic rotator options .
Large hydraulic cylinders (however within the body for option protection) power the jaws ensuring a strong grit on the excavators load.
All components are manufactured from high graded wear resistant materials ensuring durability and low maintenance costs .
Our selector grabs are supplied complete with a cradle that is manufactured specifically for your excavator.
|
|
|
|
|
|
Selector Grabs
Our wide range of Selector Grabs are designed for use in a variety of applications and include demolition grabs,
waste transfer station sorting grabs, log grabs, rail grabs, rock grabs, pipe grabs and pylon grabs.
By design all our selector grabs are light in weight, yet strong and hard wearing. They are also universally interchangeable on any carrier at specified weight.
As standard the grabs have a powerful slew ring rotation system providing 360 degree hydraulic rotation, this enabling unlimited by directional movement for precise control.
For rail, log and pipe grabs we can also offer the choice of direct mount, free handling and hydraulic rotator options .
Large hydraulic cylinders (however within the body for option protection) power the jaws ensuring a strong grit on the excavators load.
All components are manufactured from high graded wear resistant materials ensuring durability and low maintenance costs .
Our selector grabs are supplied complete with a cradle that is manufactured specifically for your excavator.
|
|
| ... products without technical information |
| |
|
|