|
|
Maneuver in tight spaces, turn within its own length
Broad product line, innovative designs, and unsurpassed range of job-matched attachments.
Excellent reach and lift height for truck loading (vertical path)
More than 20 series attachments for option: pallet fork, swing blade, utility fork grapple, asphalt cutter, backhoe, hydraulic hammer, 4-in-1 bucket, auger, cultivator, and tooth bucket
Uses the double rising and falling arms with tile auto-leveling system to make tile lifting and falling safety and quickly
Attachment can be used with bobcat type skid loader
World famous hydraulic systems from America and Italy
Famous brand engine with EPA or EC stage ii from abroad and domestic
CE and ISO 9001 certificated
Versatility, maneuverability and reliability
|
|
HCM (Skid Steer Drill)
The HCM line of drill tools is manufactured using the universal skid steer mounting plate. This allows the HCM to be attached to almost any skid steer manufactured today. Using the hydraulic of the skid steer the HCM can be attached or detached in less than five minutes.
This drill uses five-foot drill pipes or steel and can be fitted with single or double clamps depending on use. This type of drill is popular for micropiles, geothermal, fencing and blasting contractors.
|
|
POST HOLE AUGER
Turn your fencing and hole boring jobs into a one-man operation. You'll dig holes with plumb line accuracy regardless of the ground conditions thanks to the auger's double pivot mounting system. Powerfull and fully reversible, you'll appreciate the auger's high torque, heavy-duty drive system which makes light work of the toughest conditions. Wide choice of auger bit diameters and styles allows you to tackle any job.
|
|
|
|
|
|
The MAVERICK™ 500HSP Hydraulic Hammer
Energy Impact Class: 350 ft./lbs.
Operating Weight: 386 lbs
Tool Diameter: 2.09”
Required Oil Supply: 6.6-10 gallons/min
Pressure Adjusted: 1305-1740 p.s.i
Blows/Minute: 550-1,100
Carrier Weight: 6,000-10,000 lbs.
MAVERICK™ Equipment is a leading supplier of high quality hydraulic hammers to the construction, mining, demolition and utilities industries. All MAVERICK™ hammers are designed to provide maximum reliability and long operating life while adding to the bottom line. With 14 models, MAVERICK™ offers hammers compatible with a variety of carriers and applications.
These simple designed breakers are fully enclosed in a Hardox® case which protects the hammer, even in the most challenging environments. With standard features such as slip fit lower wear bushings, which cut down on maintenance to Carbon Martensite pistons, to componentized power cells, owners of MAVERICK™ hammers utilize a product that will last for many years.
Attractive pricing combined with high production and low maintenance equal a high return on investment. Backed by a comprehensive, three year warranty, MAVERICK™ hammer owners can be confident they will get their job done quickly and efficiently.
|
|
HYDRAULIC BREAKER
Three hard hitting models with output ratings from 150 ft. lbs. to 500 ft. lbs. (21kg m - 69kg m) up to 1200 blows per minute make short work of the toughest jobs. Simple, efficient low recoil design requires no surge dampening or pressure accumulator which translates into fewer moving parts, fewer problems and long high power trouble-free performance. All breakers are available with a wide choice of quick change tools.
|
|
Trancheuse T600-200
S’adapte aux Chargeuses - Compactes
aux Mini-chargeuses et aux Pelles 2,5 t à 4,5 t
|
|
D&A 40V, 50V, 60V, 70V, 80V are used for backhoe loaders.
ITEMS
Operating Weight kg(lbs) 260(572) - 540(1,191)
Impact Energy Joule(ft.lbs) 877(646) - 1,373(1,013)
Blow Rate bpm 380~1,000 - 400~1,000
Required Oil Flow lpm(gpm) 35~70 (9.24~18.48) - 50~100 (13.2~26.4)
Operating Pressure kg/(psi) 110~165(1,595~2,393) - 140~160 (1,998~2,272)
Overall Length mm(inch) 1,396(54.96) - 2,062(81.2)
Suitable Carrier ton(lbs)
|
|
Large size Hydraulic Breakers Base machine 14 to 70 tons
Advanced technology supporting new functions
Patented dust intake prevention system.
Improved lubrication greases front head and thrust bushing.
Higher back head pressure results in a 20% increase in impact energy over previous models.
Free spinning front head bushing ensures uniform wear.
Built-in hydraulic safety valve actuates when it exceeds the maximum pressure.
|
|
Medium size Hydraulic Breakers Base machine 5.5 to 14 tons
Increase in back head pressure and large piston diameter results in 25% greater impact energy.
Longer thrust bushing improves piston alignment during impact and incorporates grease holes to evenly distribute grease in the front head.
Through bolt design with large CD threads for added strength.
Increased front head wall thickness for added service life
|
|
D&A 30V, 50V, 60V are used for skid steer loaders.
ITEMS - MODEL : D&A 30V/D&A 50V/D&A 60V
Operating Weight kg(lbs) : 335 (737)/380 (836)/400(880)
Impact Energy Joule(ft.lbs) : 696 (514)/902 (665)/981(723)
Blow Rate bpm : 550~1,100/380~1,000/380~900
Required Oil Flow lpm(gpm): 30~60 (7.92~15.84)/35~70(9.24~18.48)/50~80(13.2~20.32)
Operating Pressure kg/(psi) : 110~165(1,595~2,393)/110~165(1,595~2,393)/120~165(1,740~2,393)
Overall Length mm(inch) : 1,530(60.2)/1,615(63.6)/1,639(64.53)
Suitable Carrier ton(lbs) : 2.0~4.5(4,400~9,900)/3.0~6.5(6,600~14,300)/4.5~8.0(9,900~17,600)
|
|
Small size Hydraulic Breakers Base machine 1.0 to 5.5 tons
No back head gas charging for ease of maintenance.
Through bolt design with large CD threads for added strength.
Increased front head wall thickness for added service life.
|
|
Wheels with vulcanized elastic rubber,infinitely adjustable with the adjustment wheel
Flexible edge protectors as protection against damage from curbs and walls
Spring apron segments with vulkolan tim (thickness 20 mm, height 150 mm)
Lighting system and flag holder
Roller levelling stable take-up guide
- service free -
Hydraulic swivelling by 2 stable hydraulic jack cilinders (mounted below) and integrated overload protection
Attaches to:
Wheel loaders
Tractors
Unimog-Truck
Forklifts
Special vehicles
|
|
VALLEE snow plows for loaders are offered in different configurations, with or without directional hydraulic controls, with or without side panels on the frontal plows.
We offer also side wings directly connected to the frontal plow, with hydraulic positioning.
All our plows can be directly pinned on your loader or manufacturer with your specific hooks for a quick attach system.
VALLEE is also recognised as a leader in the loader quick attach field, manufacturing for any common type of loader, from 2 to 12 yard capacity. We can also replicate any hook pattern from any manufacturer so you may adapt all your equipment to your new loader, and new accessories.
Give us a call for an evaluation of your need, and a quick delivery.
|
|
| ... products without technical information |
| |
Rugged, reliable, maintenance free
The simple, cost efficient way to reduce belt damage, increase belt life and virtually eliminate maintenance at load points.
Features / Benefits
- Large surface area maximises conveyor belt support.
- Steel-backed rubber impact bars absorb repetitive drop-shocks from heavy free-falling particles.
- Abrasion-resistant UHMW polyethylene surface minimises contact friction.
- Tapered leading edge reduces risk of belt tears or belt clip damage.
- No moving parts
- Removable side-sections simplify maintenance.
- Modular design minimises material build-up.
|
|
ASGCO's Impact Beds are designed for whatever you throw at them. Our impact beds provide impact protection for the conveyor belt, as well as a tool to help control spillage in the conveyor-loading zone.
Absorbs Impact - with our impact bars that are manufactured with our absorbent, 40-durometer rubber that can really take the shock of large material.
Modular Designed - beds can be manufactured in 2' (600mm), 4' (1200mm) or 5' (1500mm) long, depending upon the size of your material impact area.
Custom Built - beds are designed for your specific application.
Meets CEMA - design standards.
|
|
DRX (Dual Relief Xtra™) Impact beds are designed with one simple goal: protect the belt.
Slide-Out Service™ makes maintenance convenient and safe. DRX Impact beds separate in the middle and the two sides slide apart. A complete bar change out takes just one or two hours.
Velocity Reduction Technology™ is found only in the DRX line! Two levels of reaction force reduction absorb impact energy and minimize transmission back to the belt.
Impact Bar Supports enhance bar function. Made from high-strength steel, our inverted-design Impact Bar Supports allow the impact bars to expand and function properly to absorb more impact energy.
Channel Crossbeams efficiently transfer damaging impact energy to the isolation mounts.
Four Models Available:
DRX200 - for light-duty applications, up to 200 lb-ft
DRX750 - for medium-duty applications, 200-750 lb-ft
DRX1500 - for heavy-duty applications, 750-1500 lb-ft
DRX3000 - for extreme applications, 1500-3000 lb-ft.
|
|
|
|
|
|
A key requirement in the construction of any conveyor transfer point is proper support of the belt. The belt support system must provide a stable, sag-free line that prevents spillage and entrapment damage.
Martin Engineering offers an array of belt support systems to match your application, conveyor specification, and load criteria.
MARTIN® GUARDABELT™ Heavy-Duty Impact Cradle
MARTIN® GUARDABELT™ Heavy-Duty Impact Cradle is engineered to withstand impact forces from 12,000 to 17,000 pounds of force (53.4 to 75.6 kN). This complies with the Heavy-Duty (H) Classification as specified in CEMA Standard 575-2000 Bulk Material Belt Conveyor Impact Bed/Cradle Selection and Dimensions.
Rugged Impact Bars
Bars feature a top layer of slick UHMW molded to a base of impact-absorbing SBR Rubber.
Steel Backbone for Bars
Each impact bar is reinforced with a steel support structure.
Meets CEMA Design Standards
MARTIN® GUARDABELT™ Heavy-Duty Impact Cradle classified as Heavy Duty (H) as specified in CEMA Standard 575-2000.
Engineered To Fit Your Conveyor
MARTIN® GUARDABELT™ Heavy-Duty Impact Cradle fits CEMA E6 or E7 configurations.
Structure Built for Abuse
Sturdy impact cradle is specially designed to withstand the high-impact forces of conveyor loading zone.
Slide-In/Slide-Out Maintenance
Cradle incorporates MARTIN® TRAC-MOUNT™ concept for ease of bar replacement.
|
|
| ... products without technical information |
| |
Port Technology
Port installation
Chile
1x shiploader SLRQ1890.57/19 OX
travelling quadrant
loading with telescopic chute
size of ship 45000 DWT
outreach 57 /19 m
boom angle +7°/-6 °
slewing angle +/-36 °
copper concentrate 1890 t/h
|
|
| ... products without technical information |
| |
KGLS-2B was designed to completely eliminate cross-contamination. It has 2 separately operated bodies and tailgates which makes mixing of the two fractions impossible. The reliability is guaranteed by the simple design. KGLS-2B is built on chassis between 18 to 26 tonnes.
Standard equipment
Binlift (hydraulic levers on both sides)
Pneumatic bin catcher bar
Control buttons on both sides
Proportionally controlled hydraulic levers for the bin lift, the carriage plate and the packer plate
Automatic work cycle
High speed compaction
Hose break valves for raised hoppers
Hopper clearance when raised
Automatic r.p.m. regulation
Amber beacons
Vehicle work lights
Side under run protection
Access door with interlock on both sides
Dustpan and brush with holder
Units are sandblasted to Sa 2.5, following which they are given two coats of paint
Colour rear view camera with in cab-monitor
|
|
QUATRO
NTM QUATRO
The NTM QUATRO is an advanced 4-chamber reclamation unit designed to achieve maximum collection effiency in separation at source collections. Operating with specially designed 4-compartment bins, which are all loaded at the rear, the system can also be used with bagged fractions collected in a 4-compartment slave cart.
Utilising the unique NTM space efficient pendelum principle, features include compaction in all 4 compartments of the body, together with a cycle time to empty all the compartments of the bin at the same time in 15-20 seconds.
Standard equipment
Bin lift
Emergency stop
Vehicle work lights
Mud guards, mud flaps
|
|
|
|
|
|
MICROCONTROLLER BASED MANUAL LOADER
PRODUCT DESCRIPTION:
This is a microcontroller based manual loader – designed to generate stable and accurate 4-20mA dc current signal, which can be fed to the 4-20mA operated load or actuator such as motorized valve, I/P converter etc… Unlike simple current source meter, the source output 4-20mA is also taken internally as the input feedback to ensure the external loop continuity of the signal which is being fed to the load. In case, the external 4-20mA loop is open, the fault message is indicated on the display, which ensures that the signal is actually being fed or not fed to the load. The 4-20mA signal is of 12 bit resolution, and is fed to the external device in the range of 0.0 to 100.0 %. The smallest change in the output is 0.01% or 16uA. Both the set value and the feedback values are simultaneously displayed on the 4 digit red LED display. The serial communication in the form of RS485, having MODBUS RTU protocol is also provided for SCADA or DCS. The protocol, allows configuration of digital ID of each such DCS-723/DCS-966 and monitoring of source and set parameters. DCS-723/DCS-966 works on 230VAC and is protected against industrial RFI/EMI interference by suitable filter.
|
|
ML MOTOR
For skid-steer loaders
Dual sprocket
2-displacement
Integrated oil exchange
Soft shift
|
|
The TOUGHEST fork carriage on the market.
Available in loader capacities ranging from 1 cubic yard (0.765 cubic meter) to more than 12 cubic yards (10 cubic meters).
To suit your needs, we offer options like:
Lateral hydraulic fork positioner.
Vertical fork positioner.
Direct pin on or hook fastener for quick release system.
Carriage lateral displacement.
Easy on-off fork hooks for easy remouval
Easy displacement ring forks
Forks with 48" (1.2 metre) to 168" (4.27 metres) length and various thickness and width.
Heavy-duty Vallee fork arms are equipped with top-quality forged forks.
Your need a custom
Customized to meet all the needs of the industry.
|
|
| ... products without technical information |
| |
|
|