|
|
Hydraulic scrap shears:
- Standard Speed Valve.
- Central pin with tighten adjustment.
- Reversible blades.
- Cylinder protection.
- 360° rotation.
- Optimized design and shape :
- strength, weight, visibility.
|
|
Hydraulic Crushers break concrete structures such as bridge pillars, towers, walls, etc. in primary demolition.
CR SERIES HYDRAULIC CRUSHERS
Ideal for primary demolition, the CR Series is designed for controlled demolition with reduced noise levels as well as lower the dust emissions. A full 360° rotation mechanism allows safe positioning of jaws by increasing the unit's flexibility and ease of use. Features include a wide jaw opening, fast cycle times and hard crushing force.
|
|
|
|
|
|
Material Processor
Material ProcessorOn-site versatility is optimized by the availability of interchangeable jaws
NPK's Material Processors are an efficient solution for concrete, steel and rebar processing, building and bridge demolition, and recycling.
Maximum productivity
Interchangeable jaws provide superior results in demolition, concrete processing and scrap recycling.
Cost effective
Far more economical than buying four different attachments for four different applications.
Rugged design for extended life
Manufactured from high-strength, abrasion-resistant steel; reinforced shield protects cylinder rods.
Full 360° power rotation
Provides an effective angle of attack for any job wherever the location.
Reduced transportation costs
On-the-job processing reduces material volume, which cuts down the number of trips required to haul material away.
The NPK advantage in parts and service
Over 280 NPK distributor outlets are professionally staffed and conveniently located to serve your needs. Just one of the many reasons that have made NPK the leader in boom-mounted attachments.
Cylinder design improves crushing/piercing power to handle the toughest jobs
Exclusive integral hydraulic intensifier system boosts power by reducing cycle time, while improving productivity and providing greater power-to-weight ratio.
|
|
Applications:
The Hydraulic Steel Shear can be used for:
Scrap processing
Demolition
Recycling
Advantages:
The HSS Hydraulic Steel Shear combines extreme versatility, strength,
effi ciency, and durability, and are available in models suitable for a wide
range of carriers from 15 to 100 tons.
360° hydraulic rotation
Well protected power cylinder
Main cutters can be turned four times
Interchangeable teeth
Complete structure made in Hardox
Strong cutting force
Blades with trapezoidal profi le
|
|
|
Sandvik cutter-crushers and multi-processors are designed to cut through steel, timber and reinforced concrete, and break it down into manageable chunks. Normally excavator-mounted, they are used to dismantle stubborn structures in tough primary demolition jobs. With very high shear force and great crushing strength, they can be used with different jaw sets for different applications, including pulverizing. Sandvik cutter-crushers are flexible, reliable, high-performance, low-maintenance tools that give a low cost per ton of material demolished.
|
|
Shear (Hydraulic Motor Rotating)
360° degree free rotating system by hydraulic swivel motor.
Available to cut reinforced steel structures such as H-beam or I-beam.
Designed for scrap preparation and recycling in scrap yard.
Speed up valve can be installed at option.
|
|
Combi cutter which demolishes steel-frame buildings or concrete buildings with one machine.
・Main features
The main and jaw frame are made of high tensile strength cast steel for strength and light weight. The sharp cutter with large cutting force cuts heavy H steel easily.
The frame and jaw are tapered to design go into a narrow place easily.
A sharp giant center tooth gives a powerful crushing force.
Designed to crush a large concrete block in one stroke.
The tip tooth faces outward to ensure cramping of concrete piece.
A high speed valve is provided as standard equipment.
A large sliding piston rod guard is provided as standard equipment
|
|
|
|
|
|
SCRAP SHEAR - SH
FOR CUTTING METAL MATERIAL
The dedicated Mantovanibenne scrap shears are the most productive tools for all the metal processing requirements of the demolition site. Outstanding cutting forces make light work of steel sections, pipes, tanks, railway equipments etc. The powerful hydraulic cylinder develops a very high cut-ting force to cope with the toughest materials. Both the cylinder and the hoses are fully protected within the main frame of the shear. Continuous hydraulic rotation through 360° allows the attachment to be positioned quickly and accurately, tackling any type of demolition work.
Main features
Stick-mounted: choice from 8 models available for excavators from 2 to 80 t.
Bucket-mounted: choice from 8 models available for excavators from 4 to 125 t.
POWERVALVE, for the shortest cycle times. High speed Low pressure. Low
speed high pressure
Wide jaw opening
Removable and reversible cutters
All models are equipped with 360° hydraulic rotation
SH shears are constructed in hard wearing steel with high elastic limit which gives excellent resistance to abrasion with exceptional mechanical strength
Can be equipped with brackets for the Quick Coupler QC (QC is foreseen in the double version mechanical and hydraulic ) or with pinion brackets
|
|
Pliers - Shears
Series CP
400 kg - 3950 kg
A wide range of hydraulic multi-processors for 2 to 50 tons machines. Entirely made of anti-wear Hardox plate and available both with mechanic and hydraulic rotation. They are suitable for any kind of demolition of reinforced concrete structures. On some models is available the chipping kit.
|
|
Features:
good performance-to-weight ratio
quick positioning thanks to
mechanical 360° rotation unit
replaceable blades
optional pulverizing plates available
for CC 550
Applications:
light demolition work e.g. narrow
lightly reinforced concrete elements,
masonry
particularly effective for stripping out
and reconstructing interiors
|
|
HYDRAULIC ROCK / CONCRETE CUTTING ATTACHMENTS
Antraquip's line of rock cutting attachments are designed to be mounted on suitable excavators ranging from 2 to 110 tons to be used an various rugged mining, tunneling and general construction applications.
We provide two types of cutter head designs, the transverse design and the lengthways (uniaxial) design to ensure the ideal fit for any given application. The AQ line of cutters are engineered and equipped with a high torque low speed hydraulic motor with rugged gearing and symmetrically aligned cutter bit patterns on the cutter head that enables the machines to be extremely efficient not only in specialty applications but also in hard rock excavation often outperforming hydraulic hammers.
|
|
|
|
|
|
CUTTING UNITS
The hydraulic milling cutters of the ETH series can be mounted to an excavator in lieu of the bucket. The ETH is driven by a hydraulic motor which is powered by the hydraulic system of the excavator. Applications include tunneling, mining, quarries, roadway construction, demolition, forestry, and marine use.
The hydraulic milling cutter is suited for cutting rock, concrete, asphalt, industrial minerals, masonry and other similar materials. Examples of uses in various industries include:
Tunneling and Mining: Heading; profiling; restoration; ripping; and mineral extraction
Civil Engineering: Trench milling (down to 27.5 inches); foundation milling; cellar excavation
Road Construction: Asphalt cutting
Demolition: Well controlled, partial demolition while safeguarding the remainder of the building
Hydraulic Engineering: Lowering of navigable water ways; milling of trenches for pile planking; milling of culverts in river beds
Low noise operation: In all applications where other excavating equipment (i.e. hydraulic hammers) is too noisy
|
|
Excavator attachment
A versatile accessory for excavators
High productivity
Quick-change facilities from rock breaking to cutting
Simple concept compact design
Wide range of application
High availability and little maintenance requirements
|
|
The Harris HBL66-16 comes in both the transportable DT Diesel and stationary Electric models. Designed to process factory clips, skeletons, auto bodies, auto body parts, white goods, and misc. light scrap.
The HBL66-16 baler/logger is the highest performiing machine in its class
|
|
Featuring the patented “Tuck-&-Fold” compression box, which densifies the material before shearing, the Harris BSH shears are available in capacities of up to 2,200 tons. The “Tuck-&-Fold” compression box reduces pre-processing time with no or minimal torch cutting operations, allowing fast feeding and great production. BSH shears are available with throat widths of 3’ to 5’ (.9m to 1.5m).
Other exclusive features include external gib and knife adjustments, Harris cylinders, a wide-open charge hopper for fast loading of irregular scrap, an easy-to-service power pack, and Teflon-protected pistons for minimum friction and more hours of trouble-free operation. It prosesses auto scrap, steel mill scrap, selected freight car and ship sections, shapes, pipe, plate, no. 2 heavy melting scrap, and selected no. 1 heavy melting scrap.
|
|
The TG line of ferrous balers is the industry standard for heavy-duty, high production, reliable baling systems. TG Balers compresses material into the charging box with a massive lid and utilizes a three-compression baling system to produce a bale.
Processes
* Slitter coils
* Wire
* Industrial clips & skeletons
* Steel mill sheet
* Automobiles
* Railroad boxcar sides & roofs
* Selected structural steel
* Reinforcing rods
|
|
Developed with an emphasis on economy, the Harris line of ABS shears has proven to be fast and economical, meeting the needs of scrap processors around the world. Offered in 550, 800, and 1000 ton models, the ABS employs a unique concept in design; a pre-compression charging box in which one half of the box opens to accept scrap, and the other half remains rigid with the “Tuck-and-Fold” flipper. All this plus the dependable, heavy-duty construction found in more expensive shears makes the ABS shear a wise choice for any yard.
Other exclusive features include external gib and knife adjustments, Harris cylinders, an easy-to-service power pack, and Teflon-protected pistons for minimum friction and more hours of trouble-free operation. It processes steel mill scrap, shapes, pipes and plate, no. 2 heavy melting scrap, and selected no. 1 heavy melting scrap.
|
|
|
|
|
|
Applications
Neue Herbold GS series guillotines are used for the pre-size reduction of monofilament bales such as from fibre, bands or tapes, tacky film packages, extremely large lumps, start-up purgings or rubber bales.
Design
Neue Herbold GS series guillotines rigid all welded construction. The guillotine knife is mounted in a double sided channel and operates with two oversized hydraulic cylinders which meet the horizontal stator bar. The stator bar is fully adjustable to insure a precise and exact cut of the baled material. The cutting pressure of the guillotine knife can be adjusted to further insure a clean material cut. The material bale length cut can be controlled through a optional hydraulically operated gate.
Advantages
- precise adjustment of the vertical knife
- double sided frame construction
- vertical knife complete enclosed for safety
- fully adjustable stroke, knife speed and cutting pressure
- double sided knife channel
- two cylinder operation to insure true knife operation
|
|
- We design and provide special solutions for the scrap processing plant.
- The special design secures particularly efficiency in operation.
Main features:
- Rippled edges prevent little peaces getting squeezed between moving surfaces of the compression chamber.
- Prismatic guiding and stopper secure precise parallel movement of guiding parts.
- Upper part of the compression head is covered by scrapers, so that loading of scrap is even possible when the press is in operation.
- Compression head is equipped with V-type knifes, which cut easily overflowing pieces.
|
|
| ... products without technical information |
| |
|
Cutting with scissors is tedious and fatiguing. Eastman rotary shears replace scissors and quickly cut intricate markers, one of a kind patterns, samples, reworks, plastic and rubber sheeting. Offering ultimate maneuverability, Eastman's Rotary Shears are the solution to low quantity cutting jobs common in the industry.
|
|
Manual shape cutting
The P is a lightweight manual ultrasonic device allowing easy shape cutting on any type of synthetic textiles and nonwovens. This handy cutter performs very clean cuts, eliminates frays and creates consistent and clean edges.
Manual straight cutting
The T is an easy-to-handle manual device performing straight cuts on any thermofusible fabric.
|
|
| ... products without technical information |
| |
Veneer slicer model VSH1127F/1
Max.cutting sizes (mm) 2700×650×500
Cutting veneer thickness (mm) 0.14-2.2
Frequency(t/mm) 13-33
Main motor power (kw) 22kw 132-1320rpm
Lift motor power (kw) 2.2kw 1400rpm
Clamping motor power (kw) 2.2kw 1400rpm
Overall dimensions (mm) 7785×3870×2440
Weight(kg) 16600
Veneer slicer
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
