|
|
BF 70.2
The second model created by MB for small-medium crushing jobs.
* Excavator type: from 14 to 20 tons
* Weight: 2250 kg
* Load carrying capacity: 0.60 m3
* Mouth opening: 700 x 550 mm
* Jaw opening: from 20 to 120 mm
* Dimensions: length 2080, width 1080, height 1250 mm
|
|
BF 90.3
MB's epoch-making model: the first bucket crusher created by Meccanica Breganzese.
* Excavator type: from 20 to 28 ton
* Weight: 3500 kg
* Load carrying capacity: 0.75 m3
* Mouth opening: 900 x 450 mm
* Jaw opening: from 20 to 120 mm
* Dimensions: length 2450, width 1350, height 1450 mm
|
|
BF 60.1
The latest in the MB range designed for small jobs and small excavators.
* Excavator type : from 8 to 14 ton
* Weight: 1500 kg
* Load carrying capacity : 0.50 m3
* Mouth opening: 600 x 450 mm
* Jaw opening: from 20 to 100 mm
* Dimensions: length 1800, width 1050, height 1200 mm
|
|
BF 120.4
This is the largest model in the range, designed for performing on big sites.
* Excavator type: over 28 ton
* Weight: 4900 kg
* Load carrying capacity: 1.00 m3
* Mouth opening: 1200 x 450mm
* Jaw opening: from 20 to 120 mm
* Dimensions: length 2450, width 1650, height 1450 mm
|
|
Mechanical pulverizers:
- Fittings according the genuine excavator's cinematic.
- Low maintenance requirements - cast teeth (except BB1200 jaws).
- Opened jaws for calibration 0-150mm concrete crushing.
- Wavy jaws profile to allow clean rebar and concrete separation.
- Strong designed structure made of 400HB steel with hardfacing 600HB.
|
|
Breaker Technology's New CCP Mechanical Pulverizers Demolish, Process and Sort Tough Demolition Debris
CCP SERIES MECHANICAL PULVERIZERS
BTI's new CCP Series of Mechancial Pulverizers are designed for both Primary and Secondary demolition work, allowing the contractor to demolish, process and sort material, all with the one attachment. This unit works off the excavator's tilt cylinder, eliminating the expense of plumbing the machine.
Features:
Replaceable Heavy Duty Teeth
Fast and easy to change teeth in the field, with minimal downtime.
Replaceable Cutting Blades
Cuts reinforcing steel and cable. Blades can be rotated.
Separate Pivot Pin Connection
This protects the excavator's stick from possible damage.
Unique Tooth Design
Ensures maximum penetration and fragmentation.
Wear Resistant Steel
Constructed from high quality steel providing long life and durability.
|
|
|
|
|
|
G-Series Crushers
G Series Secondary Crushers Features that are specially designed for maximum productivityG-18 Secondary Crusher
NPK's secondary Concrete Crushers are designed to effectively handle any secondary demolition and recycling of concrete. NPK crushers easily crush through reinforced concrete
which allows material to be separated and recycled, and simultaneously, permits easier handling of material.
Faster, more efficient separation of concrete and steel rebar
Powerful crushing force increases as jaws meet resistance, and the exclusive NPK cylinder intensifier converts flow to pressure.
Designed for performance
Abrasion resistant, high strength, alloy steel teeth allow decreased wear and increased durability. Tooth configuration facilitates separation of steel from concrete for maximum productivity. These teeth are now bolt-on replaceable on all J models for maximum efficiency. In addition, the Model G-30JR now comes with full 360 degree power rotation for maximum versatility.
Maximum crushing force with more efficiency
Competitive cylinder systems need larger cylinders to equal the force developed by the more compact NPK intensifier system.
Shortest cycle time on the job
NPK intensifier system provides faster cycle times compared to competitive units that use large cylinders that require large amounts of flow to produce and equal amount of productivity.
|
|
|
|
|
|
U-Series Crushers
NPK's Primary/Secondary Crushers are designed to effectively handle any primary and/or secondary demolition and recycling operation. NPK crushers easily cut through reinforced concrete and light steel structures allowing material to be separated and recycled, and simultaneously, permits easier handling of material.
Faster, more efficient separation of concrete and steel rebar
Powerful crushing force increases when jaws meet resistance, as the exclusive NPK cylinder intensifier converts flow to pressure.
Designed for performance
With the newly improved tooth configuration utilizing a high-profile center tooth and lower profile teeth on both sides of the moveable jaw, these crushers can be used for both primary and secondary crushing operations. Abrasion resistant, high strength, alloy steel teeth allow decreased wear and increased durability. In addition, the "R" models come with full 360 degree power rotation for maximum versatility.
Maximum crushing/cutting force with more efficiency
Competitive cylinder systems need larger cylinders to equal the force developed by the more compact NPK intensifier system. Shortest cycle time; on the job NPK's exclusive integral hydraulic intensifier system provides faster cycle times compared to competitive units using larger cylinders that require considerable amounts of flow to produce an equal amount of productivity. Replaceable center cutter blade; cutting-torch operations are eliminated by a high-strength steel center cutter that slices through rebar and light steel structures.
|
|
The Rotating Pulverizers are designed to break construction material and to cut rebars in reinforced concrete.
They can be used for both primary and secondary demolition.
Advantages:
360° continuous hydraulic rotation
High clamping force and wide jaw opening for a greater versatility on a
wide range of demolition jobsites
Increased durability with a complete structure made in Hardox 400
Easy maintenance on site with exchangeable teeth, and well protected
piping and cylinders
Blades for cutting rebars
Speed valve for shorter work cycles
|
|
Crusher FR-Series (Hydraulic Motor Rotating)
360° rotation device makes the job convenient and more efficient.
Outstanding design allows the primary and secondary demolition work at same time.
High performance and easy pulverization in narrow space.
Longer durability with Hardox steel.
Speed up valve can be installed at option.
Crusher FC-Series (Fixed type)
Hard face welding ensures long durability and low maintenance cost.
Various and many teeth perform perfect pulverization and low transportation cost
Outstanding design enables low noise demolition work
Speed up valve can be installed at option
|
|
PULVERIZER - MCP
SECONDARY DEMOLITION
The powerful Mantovanibenne range of Pulverizer is often used in secondary crushing operation to make the demolition material more manageable from site.
Great versatility
Mantovanibenne MCP Pulverizers can separate the reinforcing bars from the concrete structure.
This will ensure that the reinforcing bars do not go into the concrete crusher, and all separate parts are available for recycling.
Mantovanibenne MCP Pulverizers have been designed for pulverizing of concrete at ground level, but their particular design also allows demolition of boundary walls and vertical structures at medium height.
|
|
Features:
especially wide jaw for high throughput
speed valve ensures short cycle time
easy-to-replace blade, tooth and tooth platesincrease uptime and decrease operation costs
hydraulic rotation unit allows limitless rotation for fast, targeted positioning in all situations
extremely resistant FEM-optimized components
robust piston rod protection
|
|
Pliers - Shears
Serie CR
1800 kg - 2990 kg
A wide range of hydraulic multi-processors for 2 to 50 tons machines. Entirely made of anti-wear Hardox plate and available both with mechanic and hydraulic rotation. They are suitable for any kind of demolition of reinforced concrete structures. On some models is available the chipping kit.
|
|
The evolution of the BPE range divided in three widths, of a manufacturing technically approved by the users of various sector (agricultural, Cuma, public works)
Double drive transmission gearbox 250 HP (2x5SPC)
Stell solid rotor
Independent anvils (maximum 4) coupled with a hydraulic shock absorber security.
The greasing is made since the outside
Lower block with anti-dust natural baffle rotor / block
|
|
It is the perfect range of public works, equipped with rotor identical to that of the BPM, crusher OBL' X works on 1.41ft depthes. As on the BPM the coeducation wood and stone is confirmed.
This driving is done by a vertical gearbox mounted on shock absorber. It allows to cross a maximum of power (600HP without damaging the penetration. Anvils are hydraulical adjustable with security. The back skates control with oil power the working depth.
|
|
Primary Crusher : Vp Type Model : Vp9, Vp15, Vp22, Vps22
A compact unit is realized through use of a high-tension cast steel frame, a high-tension steel arm and high output trunnion-mounting cylinders.
The freely 360 degree rotatable primary crusher places no burden on the hydraulic shovel, and offers superbly powerful, speedy performance - the highest crushing ability of this class - as well a large opening width
|
|
A universal, single unit, fully 360 degree rotatable pulling-down machine capable of a wide variety of jobs from reinforcing bar separation/collection through crushing into pebbles, allows for horizontal, vertical or oblique operability.
The Vm22 'long cutter' (cutter length : 360mm) specification is optionally available.
|
|
Secondary Crusher : Vs Type Model : Vs15, Vs22, Vs22FTR、Vs30
An secondary crusher combining the greatest crushing ability of this class with a large opening width and Furukawa's original center tooth, along with adoption of a box structure frame and high output trunnion-mounting cylinder have led to realization of a lighter, sturdier and more compact unit that offers unrivalled performance for such tasks as effortlessly crushing rock into pebbles and separation/collection of reinforcing bar.
Wide and powerful jaw openings process rubble from bridge columns, retainer walls, buildings and foundations. New high speed valve cycles the jaws quickly. Cylinders are a short stroke trunnion design making the compact. Jaw and teeth are specially designed to capture material and process it efficiently
|
|
BPB type stone crusher, farm work, and civil engineering
Kirpy’s study, innovation and development process focused on enhanced machine reliability is ongoing. KIRPY is constantly aware of the concerns of civil engineering, farm or mountain professionals and the firm is widening its range to include BPB type crushers with their adjustable and retractable anvil.
The BPBS is in its element working on swathes or unworked ground. Its demands on tractor power are not unreasonable and it is suitable for any site.
Technical specification
BPB 250 - Working width (m) : 2,44, Weight (kg) : 3250, Number of hammer : 12/24, Needed power (CV) : 130/140
|
|
|
|
|
|
Crusher BCS:
Performance, quality, reliability, depth, the BSC has a single capacity of crushing.
Of a innovating design forged on the future, the technology of transmission BSC (patent KIRPY) ensures an excellent reliability, an optimal safety and performances in conformity with the evolutions of power of the tractors.
The BSC, result of research KIRPY, is the answer to the requirements of the contractors: OUTPUT and PROFITABILITY.
Longevity except standard
Built starting from best anti-abrasion steels, all the working parts are easily interchangeable, which guarantees one important lifespan of the machine.
Accessibility with the unit of the transmission system is facilitated by an integral carterisation with fast opening, made safe by jacks gas.
Unequalled capacity of crushing:
- Able to treat a stony ground between 35 and 40 cm of depth.
- Great choice of granulometry thanks to its hydraulic adjustable anvil to answer all them
types of building sites (from 0-20 to 0-100/Stones in entry of 0-600)
BSC 250 - Depth of work: 35/40cm, Width of work: 2,50m, Weight (kg): 5600, Many hammers: 32, Power requested: 350 CV
BSC 300 - Depth of work: 35/40 cm, Width of work: 3,00m, Weight (kg)
: 6500, Many hammers: 40, Power requested: 400 CV
|
|
BPS : Technology and Performance
Public works and forestry, Agricultural or the mountains.
Speed and effectiveness of work, this is the KIRPY BPS concept which the form of:
- A large diameter rotor
- A carefully planned distribution of the hammers for even work,
- A hydraulically controlled breaker anvil,
- Automatic belt tensioning.
- Mountain crushing work: marking out and preparation of ski run
- Forestry work: creation and repairs to forest paths or fire breaks.
- Pipe-line laying: crushing of excavation products for laying beds and covering (Patented).
- Road construction
BPS: power, quality and adaptability
• Needed power: 220 hp
• Work depth: 25 cm
• Granulometry: 0-400 to 0-20
• Production: 300 to 800 m3/h
|
|
WX : Technology and performance - powerful, compact and strong, a large crusher for public works.
Large capacity, powerful, compact and rugged, specifically adapted for public work sites, the WX excels in the crushing and processing according the grain size measurement required of excavation equipment on a depth of 30 to 35 cm.
Its technical features meet the state-of-the-art performance level and is of rugged construction (abrasion-resistant steel structure, with hydropneumatic safety anvil…)
• Needed power: 250 hp
• Work depth: 40 to 45 cm
• Granulometry: 0-600 to 0-60
• Production: 300 to 800 m3/h
• Working speed: 300 to 800 m per hour
• Centralized lubrication system
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
