|
|
KAPIRIS is a new generation dual-tech outdoors motion sensor.
Its long and narrow detection scope creates a 50mx3m detection wall.
This sensor integrates a microwave antenna with doppler effect in K (24GHz) as well as a PIR sensor and was designed for reliable long range detection performances.
Intruder tracker:
KAPIRIS allows to track intruders inside the the protected zone. When associated with a CCTV system, it will become an essential tool to help security officers to catch intruders.
CCTV pilot:
Developed to pilot CCTV cameras.
Perimeter intrusion detection system addition:
Thanks to its long yet narrow detection scope, KAPIRIS is a perfect addition to traditional perimeter security solutions and allows the coverage of complex perimeters, with detection zones difficult to create with other technologies. (steep terrain, funny angles, ...)
|
|
|
|
|
|
Volumetric sensor buried with a score of centimetres, detecting the vibrations caused by the passage of a vehicle or a man (going, running or crawling along the supervised perimeter). A field of detection ultra high frequency is created around each pair of cables, allowing the detection of the intrusions.
Currently SORHEA proposes INTREPID MICROTRACK, buried detector which can manage a surveillance zone until 400m. Composed of a central processing unit and two pairs of cables ultra high frequency, INTREPID MICROTRACK locates with precision the point of intrusion. That makes it possible to easily discriminate the small animals as well as the bad weather.
Moreover INTREPID MICROTRACK is the only buried cable of detection able to freely define zones of detection in any point of the supervised perimeter.
INTREPID MICROTRACK is the first buried cable designed to adapt entirely to its environment, able to ensure a uniform detection throughout the perimeter.
Principle of detection and localization: Each buried cable of system INTREPID MICROTRACK is divided into cells of 2m approximately. One thus obtains 100 cells per cable of 200m. To initiate detection, central processing unit INTREPID MICROTRACK sends by the means of the transmitting cable a signal ultra high frequency coded to broad band. This signal, received by the receiving cable creates a field of electromagnetic detection invisible above and in lower part of surface of the ground and all along the pair.
|
|
|
The ceiling mount group of detectors are applied in presence detection and energy saving applications. Again the motion detection principle is applied, here very small movements will be detected. PerkinElmer offers suited detectors with special
|
|
Features
PIR movement detector for internal installations
Ceiling mounting
Small size
Adjustable ambient light intervention threshold
Adjustable Light On Time
Wide angle of survey
|
|
An presence detector is always comprised of one transmitter and at least two receiver chips with high quality optical systems. These are mounted on the sensor's PCB (modular system) or integrated into a pre-assembled housing (individual sensors). The scanning range is set by means of a mechanical micro-speed unit by changing the angle between the transmitter and receiver. This optical procedure is called triangulation or optical differential measurement. Several beams can be combined in the modular system to form lines.
Presence detectors are ideal for edge and pinch protection on revolving and sliding doors and as ride-along anti-collision protection on swing doors. They can also be used for small areas such as kitchen and service areas of restaurants and hotels or as a person counter in shopping centers.
|
|
|
The SX-360 Series ceiling-mount detector, with its unique zoom function and highly dense, triple-element detection pattern, provides unsurpassed detection performance at any ceiling height up to 5 metres. By simply twisting the units domed lens, the detection pattern can be easily adjusted at any installation height, making it one of the most flexible ceiling detectors on the market. This, combined with its compact design, makes the SX-360 suitable for a variety of applications - large or small, residential or commercial.
|
|
Sensors using socalled "combined technology" have two or more different technologies combined in one unit. With this combination the disadvantages of each individual technology can be compensated and at the same time their strengths are conjoined for the applications' ideal performance.
Combined technologies are used for the combined activation and safety at automatic doors. Besides, these sensors offer plenty of auxiliary functions which contribute to a substantial enhancement of the comfort around the door.
|
|
SHORT RANGE PHOTOELECTRIC DETECTOR
The AX-70/130/200TN Series of short range photoelectric detectors is compact in designed with IP65 high durable structure.
Rubber packing is used for all conceivable points where water, dust or bugs may penetrate, such as wiring holes, wire ports and the outer chassis. Preventing these factors helps deliver performance with higher reliability in severe outdoor environmental condition.
In addition, the length between the upper and lower optics, and the width of the optics are ideally engineered to produce the most intelligent detection pattern which reduces false alarms by detecting human intruders only.
|
|
|
The PH line is a series of active infra-red barriers that is ideal for protecting large internal or external perimeter areas. It is made up of a barrier with max external range of 60 m and 1 double beam IR; by a barrier with max external range of 150 m and 1 double beam IR; and by a barrier with max external range of 200 m and 2 double beams. They can operate on 4 different frequencies selectable with dip switches, fi tted with high quality aspheric lenses and a box with gaskets which makes them ideal for external installations on a pole (brackets supplied).
|
|
|
|
|
|
HERMES Microwave barrier
The Hermes 150-I is an upgraded version of Martec-developped series of microwave systems. The distinguishing feature of the I version is its detecting head with integrated power supply and connections. The above improvements allow for a significant cost reduction. The electronic has been entirely updated in order to meet the ROHS requirements and eliminate any obsolete componants. This new Hermes 150-I, garantees high performances and reliability.
Features
Signal processing by microprocessor ensuring precise and elaborate analyses which in turn guarantee:
- Superior detection quality
- An excellent Detection/False alarm ratio
- Telecontrol capability
- Easy to set to work (connection to a laptop computer, determination and saving of parameters)
Detection beams
A low power microwave energy beam is generated between a transmitter and a receiver placed approximately 1 metre from the ground. A continuous surveillance ring can be set up by overlapping several HERMES systems.
|
|
Integrating PIR and microwave technology into attractive, easy-to-install units, the DX Series provides stable and reliable detection in the most hostile of environments, where simple PIR detectors struggle to function.
The PIR element incorporates Quad Zone Logic to detect the smallest temperature contrast against the background temperature, enabling it to discriminate between humans and other sources of infrared. Additionally, the microwave detector incorporates Microwave Area Shaping technology to prevent the unwanted detection of movement outside the coverage area. All in all, the DX Series offers unparalleled sensing performance.
|
|
Microwave Sensor with Unidirectioonal Detection Function
The EZ+ has a selectable unidirectional detection function. Use this function to avoid extra load on building air conditioning etc.
Provides Three Types of Detection Area Settings
Simple Detection Area Adjustment and Modification
|
|
MICROWAVE
Uses a high frequency radio transceiver through an adjustable planar antenna.
Detectors may be set to be either omnidirectional or unidirectional detection depending on application and may be used to detect the direction of passage (in or out). Microwave detectors may be made on medium to large areas for automatic doors, rapid vertical doors, industrial doors or security installationsl
|
|
CX-502AM is the world's first Multi Anti-Masking Technology to prevent any kind of detecting disturbances by applying and developing various forms of anti-masking optical technology.
Other models:
CX-502: standard model with no anti-masking function
CX-502V: CX-502 with alarm memory
|
|
With long, narrow detection areas that extend from both its sides the BX-80N is specifically designed to be wall-mounted centrally on a building, covering the building perimeter with a multi-layered, horizontal barrier that detects intruders before they break in. To help reduce false activations, the range can be adjusted so that detection extends only to the end of the building. The unit also has a size-judging function, which helps it discriminate between large and small objects within the detection area.
The BX-80N is stylishly designed to blend in with any architecture and is simple to install and set up - there being no need to align transmitters and receivers.
|
|
LONG RANGE PIR DETECTOR WITH SELECTABLE DETECTION PATTERN
The CX-702 is designed to give extremely stable long-range detection performance in a variety of internal commercial and industrial applications. With patented Multi-Focus Technology, sensitivity is maintained through the entire coverage area, even in high temperature areas or in applications with low temperature contrast. Combined with Double Conductive Shielding and Temperature Compensation, a high level of false alarm protection is guaranteed.
- Selectable detection pattern with dual purpose optics
wide-angle: 21m x 21m 85°wide coverage
long-range: 45m x 2.4m
- Mounting height from 1.5 m to 3.6m
- Patented multi-focus optics & double conductive shielding
- Temperature compensation
- Sealed optics
|
|
The DM25IR passive infra-red movement detector has been designed to control the opening of pedestrian automatic doors. It detects the movement on surfaces of 1 to 4 m2 with the possibility of adjusting the vertical position of the detector and the sensitivity with a trimmer. The angle of the detector can be adjusted and the lens can be masked
internal use
detection area from 1 to 4 m2
max height of installation 2.5 m
|
|
HIGH MOUNT OUTDOOR PIR DETECTOR
• 12m 85°wide coverage
• Mounting height 2.5m - 3m
• Multiple pattern detection area technology with “Brand-New” pyro-element
• Intelligent AND logic
• Dual signal processing circuit
– Summer night compensation logic
– Advanced temperature compensation logic
• Vegetation sway analysis logic
• Patented double conductive shielding
• Ideal detection area setting
– adjustable detection length
– spot area flexible masking
• 180° angle adjustable bracket / hood
|
|
OUTDOOR PIR DETECTOR
The VX-402 provides an innovative solution to external area detection. It employs a highly reliable dual detection technique, which prevents false activations caused by small animals and birds. Two discrete detection areas are created and only when an intruder is detected inside both areas is an alarm output triggered. Double Conductive Shielding ensures that the sensor is resistant to interference from foreign light sources such as the sun and car headlights.
- 12m 90°wide coverage
- Mounting height from 0.8 m to 1.2m
- Limited detection range function with size judging function
- Patented double conductive shielding
- Sensitivity selection switch
- Temperature compensation
|
|
Optex improves its patented “Multifocus Optics” technology to create “Quad Zone Logic” for accurate detection of humans. Using this logic the RX-40Qzhas been designed to give extremely high false alarm protection with tolerance to spot temperature changes from curtains or small animals.
Optex’s Optical Quad Technology uses taller detection zones divided into upper and Lower areas. It detects IR energy changes in both areas and then couples them for extremely accurate detection, offering very high reliability in hostile areas.
|
|
VX-402REC provides great flexibility in detector-activated voice applications. As well as the ability to record any mesage in any language, with its superior playback settings, it allows the right message to be played in every situation.
Other models :
VX-402 : standared model with no voice recording & warning function
VX-402R : battery operated model with no voice recording & warning function
|
|
SELECTABLE BEAM FREQUENCY LONG RANGE PHOTOELECTRIC DETECTOR
The AX-350/650TF Series of long range photoelectric detectors with selectable beam frequencies.
The selectable beam frequencies can be used to avoid unwanted crosstalk that can occur when using multiple photobeams over long distances or beam stacking applications.
Also the AX-TF Series employs multiple beam technology and utilizes an AND circuit that requires all beams to be interrupted simultaneously before an alarm is generated. This reduces false alarms due to accidental beam interruption by falling leaves and small animals.
|
|
A sensationally definable and precise field is a characteristic feature of this microwave motion detector which is the flattest in the world. The unique, innovative microwave antenna developed by Bircher Reglomat gives you an nrivaled field geometry – the CubeZone – it makes undetected passing between the door panels and the microwave field almost impossible. ArtMotion activates
your automatic door with complete reliability.
The elegantly shaped ArtMotion is extremely flat, only 25 mm thick, and can be installed intuitively without requiring significant preliminary knowledge. You can programme the required
settings easily using the potentiometer and two DIP switches.
|
|
Herkules 2 is a micromave motion detector for industrial doors.
The Herkules 2 microwave motion detector has been specifically developed for use with industrial doors. It detects, differentiates between or masks out people or vehicles and can switch the output relays separately, depending on the requirement.
Herkules 2 is a logical further refinement of our successful microwave detectors that are also used for automatic doors. Our wealth of experience, combined with progressive planar technology, gives Herkules 2 a considerable range of functions and reliability.
|
|
|
Thanks to its extremely high versatility, Merkur 2 leads the way and can be used on virtually any type of automatic door. With its totally reliable detection, Merkur 2 provides a smooth flow of people and also ensures savings on energy and costs! The intelligent sensor system has an optional direction recognition and thereby makes sure that the door only opens when people are approaching or leaving. The door closes again immediately afterwards. For escape and emergency exits, the Merkur 2 ES.SM version is fitted with a built-in self-monitoring device.
|
|
|
BM200M and BM120M are the new microwave beam of AVS Electronics, for big external and internal protection. An up to date electronic technology is used to guarantee an optimal detection with a minimum risk of false alarm. The system is composed from two units: one transmitter (TX) and one receiver (RX), that are tuned in one of the 5 possible modulation frequencies with Dips switch. Multiple BM200M and BM120M detectors may be used to enclose a complete perimeter protection, without any problem of interference. Special signal processing circuits provide automatic compensation of back ground environmental conditions. The circuit of BM200M and BM120M are completely solidstate and protected with drip-proof resin to ensure good resistance to weather. Circuit are housed in a box properly made for the easy installation. BM200M and BM120M are individually 100% computer tested in order to grant the usual AVS Electronics reliability.
|
|
|
|
|
|
|
SPIDER is the new series of outdoor infrared detectors created from AVS Electronics, in order to realize the protection of external areas in a flexible and effective way. SPIDER range becomes the ideal partner for the protection of areas as industrial sites, parking places, terraces, garden, portico, scaffolds, doors and other outdoor or indoor areas. SPIDER is microprocessor based. Electronic circuits are protected with a drip-proof resin and housed in a special plastic box, to ensure good resistance to environmental conditions. The optical section is based on a professional mirror technology, to guarantee high quality and detection stability. Trough a mechanical solution it is possible an easy and practical adjustment of the pattern on 180 °. A particular circuit controlled by the microprocessor is stabilizing the temperature changing, giving always the best detection sensitivity and a consequent optimal and constant protection. SPIDER can be installed on wall surfaces or on pole (additional brackets KIT SP). Walk test and alignment (only for Spider Active) is easy with the Buzzer and LED help function.
|
|
|
|
|
|
A perfect alarm system installation must be able to rely on the precision and reliability of the detectors that have been installed to protect the zones. For this reason, Tecnoalarm has developped a complete range of detectors permitting a more efficient and customized coverage of every zone in every environmental condition.
Infact, there are infrared, microwave and dual technology detectors, both wired and wireless, with or without antimasking control and with different lenses.
The detectors equipped with the technology of Remote Digital Verification (RDV®), an exclusive technology by Tecnoalarm, stand out against the others as they permit the remote verification of the presence of intruders in the protected area.
For the protection of outdoor spaces, Tecnoalarm has developped the infrared barriers DOORBEAM/S and WINBEAM/S, mounted next to the doors or windows and available in several colours and lengths, as well as the microwave barriers EXPLORER II and MINIEXPLORER, apt to cover perimeters and large open spaces such as gardens, parks or courtyards.
|
|
|
|
|
|
A perfect alarm system installation must be able to rely on the precision and reliability of the detectors that have been installed to protect the zones. For this reason, Tecnoalarm has developped a complete range of detectors permitting a more efficient and customized coverage of every zone in every environmental condition.
Infact, there are infrared, microwave and dual technology detectors, both wired and wireless, with or without antimasking control and with different lenses.
The detectors equipped with the technology of Remote Digital Verification (RDV®), an exclusive technology by Tecnoalarm, stand out against the others as they permit the remote verification of the presence of intruders in the protected area.
For the protection of outdoor spaces, Tecnoalarm has developped the infrared barriers DOORBEAM/S and WINBEAM/S, mounted next to the doors or windows and available in several colours and lengths, as well as the microwave barriers EXPLORER II and MINIEXPLORER, apt to cover perimeters and large open spaces such as gardens, parks or courtyards.
|
|
|
|
|
|
With D.I.S. technology(*) 100Hz (Double Interlaced Scanning 100Hz), each cell integrates the dual functions of transmitter and receiver. The infrared beams that are created are multiplexed and synchronized at a frequency of 100Hz.
Thanks to this technology, all columns are identical. The idea of separate transmission and reception modules has been surpassed.
The D.I.S.(*) TECHNOLOGY 100HZ IS INNOVATION THAT SORHEA HAS DEVELOPED IN THE QUEST FOR RELIABILITY ! * Patent pending - No. 06 02310
Dual digital AGC enables compensation for variations in the incoming signal to ensure uninterrupted operation of the barrier. This digital processing of the signal is performed based on a time curve that differentiates exterior phenomena (meteorological or others) from intrusion attempts and thereby significantly reduces the number of false alarms.
COLIRIS II has output switches for each column.
This feature permits maximum limitation of wiring constraints.
You choose, with respect to your needs and constraints, where to wire alarm switches, at one end or the other of the infrared barrier.
There are multiple possibilities for wiring and output switches !
|
|
|
|
