|
|
|
|
|
|
16-channel hardware H.264 full D1 NVR with Core 2 Duo/Quad CPU and 4 internal storage drives
Features
* 16-channel analog video input
* H.264 AVC codec
* Socket LGA775 supports Core 2 Duo, Core 2 Quad CPUs
* 4 internal 3.5" SATA II HDD bays
* Slim DVD-RW drive
* 16-channel BNC looping
* Full D1 resolution
* 30FPS NTSC / 25FPS PAL per channel
Form Factor
2U Rackmount
H.264 Video Compression
H.264/AVC codec
Horizonatal Resolution: 720 pixels NTSC / 704 pixels PAL
Vertical Resolution: 480 lines NTSC / 576 lines PAL
NTSC: 30FPS per channel / PAL: 25FPS per channel
Audio
16 channel G.711 audio inputs via RCA connector (optional)
1Vp-p, 10Kohms input, 1 Vrms output
Platform
Supports Intel Core 2 Duo and Core 2 Quad CPUs, LGA775 socket
Intel Q35 + ICH9DO chipset
Storage
Four internal 3.5” SATA II HDD bays
Slim CD drive bay
HDD Interface SATA II x 6
RAID
Intel Rapid Recovery
System Memory
Dual-channel DDR2 DIMM 800/667 MHz
Max Capacity: 4GB
Socket: 240P DIMM x 2
OS Supported
Microsoft Windows XP
Ubuntu Linux 7.10
Fedora 7
Linux 2.6.18 ~ 2.6.25
Networking
Ethernet Ports RJ45 x 2 GbE (Intel 82573L)
Alarm/PTZ
PTZ Control 1 RS-485 for PTZ
Alarm Interface 8 DI and 8 DO terminal block
Compliance
CE Emission, FCC Class A, RoHS
Software
Evaluation Kit: EyeShot 2000 DVR Control Panel (Windows XP)
SDK: Linux and Windows SDK available
http://www.lannerinc.com
|
|
AXENCL-9A & 9B EXPLOSION-PROOF ATEX CERTIFIED STAINLESS STEEL 12” & 18” CCTV CAMERA HOUSING (ENCLOSURE)
* Electro polished Stainless Steel with optional special corrosion proof paint for maximum corrosion protection
* Special steel glass for extra clarity and durability
* Certified to EEx d IIC T6 (ATEX Directive 94/9/EC)
* Fixed Mount – Bracket or Base installation
* Available in 12 inch and 18 inch versions
* Suitable for fixed or zoom lens cameras and integrated cameras
* Weather Resistant to IP68 (1.2 Mtrs) & NEMA 6 & 6P Standards
* Designed for use in extremely harsh environments and hazardous area locations
* Optional Sunshield
|
|
|
The explosion proof equipment has been designed to meet rigorous requirements and installations in hazardous areas, where flammable gases and powders may be present. All the EEX series has been certified to meet the ATEX, IECEx and GOST-R standards. The housing can accommodate most camera and lens combinations, while the P&T, thanks to the single multi-core pre-wired cable simplifies installation and maintenance. Videotec’s wide range of solutions are being utilised in explosive and hazardous atmospheres throughout the world.
|
|
Housing / Mounts / SnapPaks
Honeywell's housings and mounts are the perfect accessories to complete your camera installation, and have been designed to withstand the most demanding indoor and outdoor environments.
- HHC12 Series Housings - Medium Environmental Housing
- HHM Series Housing Mount Adapters - Housing Mount Adapters
- HHM Series Housing Mounts - Housing Mounts
- HBC5 Series - Indoor Camera Mounting Bracket
- ACUIX™ Mounts and Adapters - Parapet, Roof, Wall and Pendant Mounts
- SnapPak - Pre-Assembled Camera, Housing, and Lens Package
|
|
|
The VIDEOTEC housings have been produced using extrusions and die-castings with the highest quality aluminium and innovative technopolymer materials. These products are furnace painted with epoxypolyester powder colour, RAL9002, while the bolts and screws are in stainless steel. The numerous available accessories, like heater, camera power supply, blower and air filter, wiper and washer satisfy any installation requirement. The Hi-PoE housings have been developed to allow an easier installation of the IP and Megapixel cameras, using the High PoE (Power over Ethernet).
|
|
|
The stainless steel special housings and P&T's have been designed to protect the cameras from particulary aggressive environmental conditions. They are entirely made of AISI 304 or AISI 316 stainless steel. In consideration of the extremely severe specifications, each detail has been carefully analysed, obtaining in this way very reliable products, suitable for industrial uses.
|
|
Model PVR-4450
4U Industrial Grade Rackmount DSS Platform
Adopts Intel® Matrix Storage Technology to support RAID 0/1/5/10
Support up to six PCI slots and one PCI-E x 16 slot
Support up to five HDD
Dual Gigabit Ethernet ports
Model PVR-2423
2U Industrial Grade Rackmount DSS Platform
Fantastic cooling design for CPU and add-on card
Remote control support
Dual Gigabit Ethernet ports
Model PVR-1140
1U Industrial Grade Rackmount DSS Platform with Dual Core Performance
Support Core Duo/Core Solo processor
Support PCI-E x 16 slot for Graphic card, PCI-E x 4 slot for RAID card and PCI slot for capture card
Adopts Intel® Matrix Storage Technology to support RAID 0/1(RAID 0/1/5/10)
Dual Gigabit Ethernet ports
|
|
|
Most cameras are C-mount (1"-32t / 17.53mm flange distance). Some are CS-mount (1"-32t / 12.53mm flange distance) and can be converted to C-mount by adding a 5mm spacer. Earlier professional cameras came with an ENG mount (bayonet / 48mm flange distance). Lately, many of the more sophisticated cameras have the option of C-mount or F-mount (Nikon bayonet / 46.5mm flange distance).
|
|
| ... products without technical information |
| |
|
|
|
|
Roberts Sinto's SCC Core Center revolutionizes core production. The SCC Core Center uses the most advanced technology in core machine processing to produce intricate cores from a few ounces up to 130 lbs.
Controls:
- PLC Controls
- Touch Screen
- Diagnostics
- Linear Transducers
The SCC Core Center controls allow the complete operation, set-up and machine monitoring from a single touch screen control mounted on the front of the enclosure. All major operations are hydraulic and are controlled by linear transducers providing fast, accurate operation.
Continuous Clamping of Core Box
The SCC Core Center continuously clamps the core boxes during the core making process. The blow head and gassing head are moved to the core box, keeping the mechanism simple and reducing the possibility of finning.
Special Air Flow Fluidizing Blow Chamber
The special blow chamber fluidizes the sand allowing the operator to make high-density intricate cores. The SCC Core Center will blow cores from a few ounces up to 130 lbs.
Horizontal / Vertical Core Boxes with Quick Change
The SCC Core Center can use both horizontal and vertical core boxes. A vacuum clamping system allows the SCC Core Center to use existing tooling and simplifies set-up.
Total Self-Contained System
The SCC Core Center is a complete system including mixer and gas generator, all contained in an environmentally friendly system
|
|
Hot Box
Please call or see a Roberts Sinto representative for information on our many Hot Box Core equpiment machines.
|
|
FRITZ HANSBERG manufactures a full range of high-volume core machines for all cold-box and hot-box processes.
Available with shoot chamber capacity from 5 to 300 l, these high-performance, world-class machines are truly built for the foundry, designed and manufactured to be employed on a continuous basis for 6 days/week, 24 h/day.
DV / R Series
- Vertical core box split
- Production rate up to 300 cycles/h
- Core box clamping between shooting and curing
- Five stations allowing for the use of up to five different core boxes
- Core removal on take-out belt
- Cold-box versions (all processes)
|
|
CORE-SHOOTING MACHINES
Core-shooting machines for cold-box, hot box and shell moulding processes. Shooting head capacity from 12 to 120 l for vertically or horizontally-split core boxes, single or multiple stations
|
|
· Universal machine for jobbing foundries
· Flexible, fast, and extremly reliable
· For cold core hardening processes
· Shoot volume from 10 to 150 liters
· Accepts vertical & horizontal tooling up to six parts
· Rapid and simple tooling change - over by means of vacuum clamping system
· Hydraulic system for very high closing force
· Computer interface with automatic error diagnostic funtion
· Average machine cycle time from 10 sec. (without gassing, shoot, exhaust)
|
|
Cold Box-High Repetition
- Integral PLC control panel with remote operator panel
-Height adjustable core belt with cotinuous rotation of forward / backward movement.
- Facility to activate loose pieces
- Automatic spray release agent and box cleaning function (optional)
-Integral gas generator for Amine, Methl Formate or CO2
|
|
|
model SPAR 5 - SPAR 7 - SPAR 10 - SPAR 20 - SPAR 30: completely automatic, with capacity from 5 up to 30 litres, these machines are the ideal solution for the production of large cores runs. They are designed to ensure high quality production, working safety, silent operation and easy maintenance. The finished cores are ejected onto the discharge belt, which indexes forward on every shot, to bring the cores outside the machine. They are available as the basic model or complete with various optional devices, suitable to the customer's requirements.
|
|
FRITZ HANSBERG manufactures a full range of high-volume core machines for all cold-box and hot-box processes.
Available with shoot chamber capacity from 5 to 300 l, these high-performance, world-class machines are truly built for the foundry, designed and manufactured to be employed on a continuous basis for 6 days/week, 24 h/day.
SF Series
- Horizontal core box split
- Production rate up to 120 cycles/h
- Multiple stations
- Core removal on take-out belt or forks
- Hot-box versions (gas and electrical
|
|
Automatic core blowing machine with side-thrust vertical split of the core box, including moulding station, based on the Shell-Moulding process.
It is designed in particular to produce cores such as pump impellers and ventilated brake discs.
The machine is equipped with a round spray reservoir and blowing head cooling system.
The pneumatically-powered automatic loading system also includes a loading hopper.
The mobile support, attached to the half-box containing the core, is equipped with a device to overturn it onto the belt using cylinder-driven extractors. Heating is generated by an independent burner frame for each half-box, fed by an air and gas mix (LPG or NATURAL GAS) with heat regulation.
The machine is equipped with a 24V control panel for manual or automatic operation in a single or continuous cycle.
From the protective booth the operator can access the machine while maintaining the safety level established by CE regulations.
|
|
Hot Box Core Shooters
• Hydraulically or pneumatically operated
• Electric heating system
• SBucket elevator for automatic sand fill
• Height adjustable core discharge belt
• Water cooled head and heated plates
• PLC control
• Independent temperature control on both plates
• Facility to control loose plates
|
|
Outline-flat filter exhaust
* Enclosure IP 43 to IP 54 (depending upon execution)
* Permission "Germanic Lloyd"
* Patented installation system "click and sits" for fast and screwless assembly
* Further technical details and special voltages on inquiry
|
|
|
The “FPF” series fan filters are widely recognised for their thin external profile, fashionable design, snap-mounting system and high performance. All models are Nema 12 and IP54 standard rated but, on request, alternatively available in Nema 3R and IP55 and also in EMC-shielded version.
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The high-performance axial fan provides high air circulation.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-Very low noise
-Minimal depth in enclosure
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
Product group P3
Pivoting frame for directed ventilation
Electric data:
• Protection class I (ground wire)
• Protection type IP 20
• Connecting leads 0,5m 3x0,75 mm² PVC
Other lengths upon request
Utilizing a circulation fan avoids head accumulation and formation of heat pockets inside control cabinets. When heaters are installed, their efficiency is increased by circulation fans. The resulting air circulation dissipates heat through the surface of the cabinet and so, a cooling effect is achieved.
|
|
Filter fans and EMC-compatible filter fans
Product group P3
These devices have "blowing" function only. Function "suction" is always to be ordered separately.
As a standard, all other devices are delivered having the function "blowing". Function "suction" by turning around the motor.
|
|
COMMON FEATURES
The units allow a simple and cost effective solution for
enclosure cooling.
Designed for easy clip-on mounting and made out of high resistance, self extinguishing ABS UL94VO grade (RAL7035) they cover an air flow rate range from 35 m3/hr to 1100 m3/hr.
They provide an IP54 protection degree.
All the fans are mounted on ball bearings with MTBF of 40000 hours.
|
|
Seifert has relied on consequent engineering for the four actual EMC filter fan models which have a lot to offer: suppression of up to 100dB thanks to a metallized EMC grid, a high protecting rating of IP55 & an assembly frame for easy mounting. A special feature of the largest model is the use of 4 separate economical fans for more air volume & less noise.
suppression of80...100 dB (up to 300 MHz)
air volume 21...300 m³/h EMV (Standart up to 550 m³/h)
complete sealing frame
reversable design cover
suitable outlet filter
quick press-in mounting
|
|
... see all the products in the category
Axial fans
|
|
|
see the results for the following category : 
