|
|
AXENCL-9A & 9B EXPLOSION-PROOF ATEX CERTIFIED STAINLESS STEEL 12” & 18” CCTV CAMERA HOUSING (ENCLOSURE)
* Electro polished Stainless Steel with optional special corrosion proof paint for maximum corrosion protection
* Special steel glass for extra clarity and durability
* Certified to EEx d IIC T6 (ATEX Directive 94/9/EC)
* Fixed Mount – Bracket or Base installation
* Available in 12 inch and 18 inch versions
* Suitable for fixed or zoom lens cameras and integrated cameras
* Weather Resistant to IP68 (1.2 Mtrs) & NEMA 6 & 6P Standards
* Designed for use in extremely harsh environments and hazardous area locations
* Optional Sunshield
|
|
|
The explosion proof equipment has been designed to meet rigorous requirements and installations in hazardous areas, where flammable gases and powders may be present. All the EEX series has been certified to meet the ATEX, IECEx and GOST-R standards. The housing can accommodate most camera and lens combinations, while the P&T, thanks to the single multi-core pre-wired cable simplifies installation and maintenance. Videotec’s wide range of solutions are being utilised in explosive and hazardous atmospheres throughout the world.
|
|
Housing / Mounts / SnapPaks
Honeywell's housings and mounts are the perfect accessories to complete your camera installation, and have been designed to withstand the most demanding indoor and outdoor environments.
- HHC12 Series Housings - Medium Environmental Housing
- HHM Series Housing Mount Adapters - Housing Mount Adapters
- HHM Series Housing Mounts - Housing Mounts
- HBC5 Series - Indoor Camera Mounting Bracket
- ACUIX™ Mounts and Adapters - Parapet, Roof, Wall and Pendant Mounts
- SnapPak - Pre-Assembled Camera, Housing, and Lens Package
|
|
|
The VIDEOTEC housings have been produced using extrusions and die-castings with the highest quality aluminium and innovative technopolymer materials. These products are furnace painted with epoxypolyester powder colour, RAL9002, while the bolts and screws are in stainless steel. The numerous available accessories, like heater, camera power supply, blower and air filter, wiper and washer satisfy any installation requirement. The Hi-PoE housings have been developed to allow an easier installation of the IP and Megapixel cameras, using the High PoE (Power over Ethernet).
|
|
|
Most cameras are C-mount (1"-32t / 17.53mm flange distance). Some are CS-mount (1"-32t / 12.53mm flange distance) and can be converted to C-mount by adding a 5mm spacer. Earlier professional cameras came with an ENG mount (bayonet / 48mm flange distance). Lately, many of the more sophisticated cameras have the option of C-mount or F-mount (Nikon bayonet / 46.5mm flange distance).
|
|
|
|
|
|
16-channel hardware H.264 full D1 NVR with Core 2 Duo/Quad CPU and 4 internal storage drives
Features
* 16-channel analog video input
* H.264 AVC codec
* Socket LGA775 supports Core 2 Duo, Core 2 Quad CPUs
* 4 internal 3.5" SATA II HDD bays
* Slim DVD-RW drive
* 16-channel BNC looping
* Full D1 resolution
* 30FPS NTSC / 25FPS PAL per channel
Form Factor
2U Rackmount
H.264 Video Compression
H.264/AVC codec
Horizonatal Resolution: 720 pixels NTSC / 704 pixels PAL
Vertical Resolution: 480 lines NTSC / 576 lines PAL
NTSC: 30FPS per channel / PAL: 25FPS per channel
Audio
16 channel G.711 audio inputs via RCA connector (optional)
1Vp-p, 10Kohms input, 1 Vrms output
Platform
Supports Intel Core 2 Duo and Core 2 Quad CPUs, LGA775 socket
Intel Q35 + ICH9DO chipset
Storage
Four internal 3.5” SATA II HDD bays
Slim CD drive bay
HDD Interface SATA II x 6
RAID
Intel Rapid Recovery
System Memory
Dual-channel DDR2 DIMM 800/667 MHz
Max Capacity: 4GB
Socket: 240P DIMM x 2
OS Supported
Microsoft Windows XP
Ubuntu Linux 7.10
Fedora 7
Linux 2.6.18 ~ 2.6.25
Networking
Ethernet Ports RJ45 x 2 GbE (Intel 82573L)
Alarm/PTZ
PTZ Control 1 RS-485 for PTZ
Alarm Interface 8 DI and 8 DO terminal block
Compliance
CE Emission, FCC Class A, RoHS
Software
Evaluation Kit: EyeShot 2000 DVR Control Panel (Windows XP)
SDK: Linux and Windows SDK available
http://www.lannerinc.com
|
|
Model PVR-4450
4U Industrial Grade Rackmount DSS Platform
Adopts Intel® Matrix Storage Technology to support RAID 0/1/5/10
Support up to six PCI slots and one PCI-E x 16 slot
Support up to five HDD
Dual Gigabit Ethernet ports
Model PVR-2423
2U Industrial Grade Rackmount DSS Platform
Fantastic cooling design for CPU and add-on card
Remote control support
Dual Gigabit Ethernet ports
Model PVR-1140
1U Industrial Grade Rackmount DSS Platform with Dual Core Performance
Support Core Duo/Core Solo processor
Support PCI-E x 16 slot for Graphic card, PCI-E x 4 slot for RAID card and PCI slot for capture card
Adopts Intel® Matrix Storage Technology to support RAID 0/1(RAID 0/1/5/10)
Dual Gigabit Ethernet ports
|
|
|
The stainless steel special housings and P&T's have been designed to protect the cameras from particulary aggressive environmental conditions. They are entirely made of AISI 304 or AISI 316 stainless steel. In consideration of the extremely severe specifications, each detail has been carefully analysed, obtaining in this way very reliable products, suitable for industrial uses.
|
|
| ... products without technical information |
| |
|
The “FPF” series fan filters are widely recognised for their thin external profile, fashionable design, snap-mounting system and high performance. All models are Nema 12 and IP54 standard rated but, on request, alternatively available in Nema 3R and IP55 and also in EMC-shielded version.
|
|
Outline-flat filter exhaust
* Enclosure IP 43 to IP 54 (depending upon execution)
* Permission "Germanic Lloyd"
* Patented installation system "click and sits" for fast and screwless assembly
* Further technical details and special voltages on inquiry
|
|
Filter fans and EMC-compatible filter fans
Product group P3
These devices have "blowing" function only. Function "suction" is always to be ordered separately.
As a standard, all other devices are delivered having the function "blowing". Function "suction" by turning around the motor.
|
|
-Very low noise
-Minimal depth in enclosure
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The high-performance axial fan provides high air circulation.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
COMMON FEATURES
The units allow a simple and cost effective solution for
enclosure cooling.
Designed for easy clip-on mounting and made out of high resistance, self extinguishing ABS UL94VO grade (RAL7035) they cover an air flow rate range from 35 m3/hr to 1100 m3/hr.
They provide an IP54 protection degree.
All the fans are mounted on ball bearings with MTBF of 40000 hours.
|
|
Seifert has relied on consequent engineering for the four actual EMC filter fan models which have a lot to offer: suppression of up to 100dB thanks to a metallized EMC grid, a high protecting rating of IP55 & an assembly frame for easy mounting. A special feature of the largest model is the use of 4 separate economical fans for more air volume & less noise.
suppression of80...100 dB (up to 300 MHz)
air volume 21...300 m³/h EMV (Standart up to 550 m³/h)
complete sealing frame
reversable design cover
suitable outlet filter
quick press-in mounting
|
|
Product group P3
Pivoting frame for directed ventilation
Electric data:
• Protection class I (ground wire)
• Protection type IP 20
• Connecting leads 0,5m 3x0,75 mm² PVC
Other lengths upon request
Utilizing a circulation fan avoids head accumulation and formation of heat pockets inside control cabinets. When heaters are installed, their efficiency is increased by circulation fans. The resulting air circulation dissipates heat through the surface of the cabinet and so, a cooling effect is achieved.
|
|
... see all the products in the category
Axial fans
|
The interior closings solve the problem of noise of all kinds of machinery inside industrial ships, rooms of machines and in the industry in general.
Realized in proportion to the needs of the client and of the productive process.
For machines that work with air, they install mufflers of entry and air exit calculated specially according to the parameters of wealth and loss of load. Also present is had not increase the temperature of work of the machines by means of the installation of mufflers of air renovation.
|
|
Soundproofing cover for bitmap printer
Made with a 10mm thick composite material with soundproofing properties better than a 19mm thick particle board.
Flame resistant (M1 CSTB-ULV 94 USA), panels and insulating foam are self-extinguishing and respect the NE-CEE electrics standards.
Heat extraction starts when switching on the printer.
Twice lighter than a particle board cover, with a very high strength level.
Exist for all the printers on the market
|
|
| ... products without technical information |
| |
Thermostats, automatic controller etc.
Taxes/rules/supervising
With a temperature and a humidity control system you create climate conditions, which make a perfect function possible of your components.
Thermostats and Hygrostate steer and regulate
* Heaters,
* Filter exhaust,
* Heat exchanger or
* Coolers,
if fixed temperature levels or dampness levels to be over and/or fallen below. For the protection of smooth operational sequence fans can be supervised by filter exhausts additionally. An air flow guard recognizes and signals, if an exhaust failed blocked or.
|
|
-Large setting range
-Small size
-Simple to mount
-High switching performance
KTO 011:
Thermostat (normally closed); contact breaker for regulating heaters.
Approvals: UL File Nr. E164102
|
|
-Large setting range
-Small size
-Simple to mount
-High switching performance
KTS011:
Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded.
Approvals: UL File Nr. E164102
|
|
Argweld® Flexible Welding Enclosures
The range of 'Flexible Welding Enclosures' has been designed for applications where a rigid chamber may not be economically viable or where space may be at a premium.
Typical applications include:
The occasional and production welding of titanium and nickel alloy components for the aerospace.
Medical instrument and surgical implant manufacturers.
The welding of stainless steel components.
Eliminate the expensive cleaning of discolouration.
Racing car industries.
Apart from the standard models, special enclosures are designed and manufactured to suit all applications.
Experience is available of nuclear and chemical industry applications for the handling of a wide range of products and materials, as well as in the pipeline industry with clam shell models to fit on and off pipes.
Advantages
Operator comfort and ease of use
Very low cost, yet high quality
Fast, easy purge
Bright, shiny, oxide free welds
Frees up valuable floor space
Fast delivery
|
|
AX-5000 Laser Glovebox Features:
- Turnkey, one-supplier solution
- Pulsed Nd:YAG welding laser 0.25-600W
- Multi-axis motion control system
- Closed-loop environment control
- CDRH, Class 1, eyesafe enclosure
- Standard, configurable and custom solutions
Based on the industry-leading AX-5000, Unitek Benchmark's laser glovebox systems offer precise control of moisture, pressure, and gas composition in the processing environment and are optimized for laser welding sensitive electronic packages such as implantable medical devices and semiconductors. Modular, configurable design ensures that we can meet any manufacturing need or budget.
|
|
Light isolation enclosure, mobile and disposable
Simple structure, easy assembly
Slanted panels for a better vision
Optimal air-tightness of the enclosure
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
