|
|
AXENCL-9A & 9B EXPLOSION-PROOF ATEX CERTIFIED STAINLESS STEEL 12” & 18” CCTV CAMERA HOUSING (ENCLOSURE)
* Electro polished Stainless Steel with optional special corrosion proof paint for maximum corrosion protection
* Special steel glass for extra clarity and durability
* Certified to EEx d IIC T6 (ATEX Directive 94/9/EC)
* Fixed Mount – Bracket or Base installation
* Available in 12 inch and 18 inch versions
* Suitable for fixed or zoom lens cameras and integrated cameras
* Weather Resistant to IP68 (1.2 Mtrs) & NEMA 6 & 6P Standards
* Designed for use in extremely harsh environments and hazardous area locations
* Optional Sunshield
|
|
|
The explosion proof equipment has been designed to meet rigorous requirements and installations in hazardous areas, where flammable gases and powders may be present. All the EEX series has been certified to meet the ATEX, IECEx and GOST-R standards. The housing can accommodate most camera and lens combinations, while the P&T, thanks to the single multi-core pre-wired cable simplifies installation and maintenance. Videotec’s wide range of solutions are being utilised in explosive and hazardous atmospheres throughout the world.
|
|
|
|
|
|
16-channel hardware H.264 full D1 NVR with Core 2 Duo/Quad CPU and 4 internal storage drives
Features
* 16-channel analog video input
* H.264 AVC codec
* Socket LGA775 supports Core 2 Duo, Core 2 Quad CPUs
* 4 internal 3.5" SATA II HDD bays
* Slim DVD-RW drive
* 16-channel BNC looping
* Full D1 resolution
* 30FPS NTSC / 25FPS PAL per channel
Form Factor
2U Rackmount
H.264 Video Compression
H.264/AVC codec
Horizonatal Resolution: 720 pixels NTSC / 704 pixels PAL
Vertical Resolution: 480 lines NTSC / 576 lines PAL
NTSC: 30FPS per channel / PAL: 25FPS per channel
Audio
16 channel G.711 audio inputs via RCA connector (optional)
1Vp-p, 10Kohms input, 1 Vrms output
Platform
Supports Intel Core 2 Duo and Core 2 Quad CPUs, LGA775 socket
Intel Q35 + ICH9DO chipset
Storage
Four internal 3.5” SATA II HDD bays
Slim CD drive bay
HDD Interface SATA II x 6
RAID
Intel Rapid Recovery
System Memory
Dual-channel DDR2 DIMM 800/667 MHz
Max Capacity: 4GB
Socket: 240P DIMM x 2
OS Supported
Microsoft Windows XP
Ubuntu Linux 7.10
Fedora 7
Linux 2.6.18 ~ 2.6.25
Networking
Ethernet Ports RJ45 x 2 GbE (Intel 82573L)
Alarm/PTZ
PTZ Control 1 RS-485 for PTZ
Alarm Interface 8 DI and 8 DO terminal block
Compliance
CE Emission, FCC Class A, RoHS
Software
Evaluation Kit: EyeShot 2000 DVR Control Panel (Windows XP)
SDK: Linux and Windows SDK available
http://www.lannerinc.com
|
|
Model PVR-4450
4U Industrial Grade Rackmount DSS Platform
Adopts Intel® Matrix Storage Technology to support RAID 0/1/5/10
Support up to six PCI slots and one PCI-E x 16 slot
Support up to five HDD
Dual Gigabit Ethernet ports
Model PVR-2423
2U Industrial Grade Rackmount DSS Platform
Fantastic cooling design for CPU and add-on card
Remote control support
Dual Gigabit Ethernet ports
Model PVR-1140
1U Industrial Grade Rackmount DSS Platform with Dual Core Performance
Support Core Duo/Core Solo processor
Support PCI-E x 16 slot for Graphic card, PCI-E x 4 slot for RAID card and PCI slot for capture card
Adopts Intel® Matrix Storage Technology to support RAID 0/1(RAID 0/1/5/10)
Dual Gigabit Ethernet ports
|
|
Housing / Mounts / SnapPaks
Honeywell's housings and mounts are the perfect accessories to complete your camera installation, and have been designed to withstand the most demanding indoor and outdoor environments.
- HHC12 Series Housings - Medium Environmental Housing
- HHM Series Housing Mount Adapters - Housing Mount Adapters
- HHM Series Housing Mounts - Housing Mounts
- HBC5 Series - Indoor Camera Mounting Bracket
- ACUIX™ Mounts and Adapters - Parapet, Roof, Wall and Pendant Mounts
- SnapPak - Pre-Assembled Camera, Housing, and Lens Package
|
|
|
The VIDEOTEC housings have been produced using extrusions and die-castings with the highest quality aluminium and innovative technopolymer materials. These products are furnace painted with epoxypolyester powder colour, RAL9002, while the bolts and screws are in stainless steel. The numerous available accessories, like heater, camera power supply, blower and air filter, wiper and washer satisfy any installation requirement. The Hi-PoE housings have been developed to allow an easier installation of the IP and Megapixel cameras, using the High PoE (Power over Ethernet).
|
|
|
The stainless steel special housings and P&T's have been designed to protect the cameras from particulary aggressive environmental conditions. They are entirely made of AISI 304 or AISI 316 stainless steel. In consideration of the extremely severe specifications, each detail has been carefully analysed, obtaining in this way very reliable products, suitable for industrial uses.
|
|
|
Most cameras are C-mount (1"-32t / 17.53mm flange distance). Some are CS-mount (1"-32t / 12.53mm flange distance) and can be converted to C-mount by adding a 5mm spacer. Earlier professional cameras came with an ENG mount (bayonet / 48mm flange distance). Lately, many of the more sophisticated cameras have the option of C-mount or F-mount (Nikon bayonet / 46.5mm flange distance).
|
|
| ... products without technical information |
| |
Ladder racks for panel vans / PE
The PE can be adapted to fit all panel vans, whatever the make, thanks to an installation kit unique to each type of vehicle.**
Admissible load: 60 kg per side!
Maximum load: 80 kg per side!
43 turns on the operating handle for loading or unloading, i.e. less than 30 seconds!
|
|
Dalmec offer a wide range of manipulators designed for the “weightless” handling of cardboard boxes, packaged wooden cases, products covered in film (polythene, shrink - wrap etc….).
Simple to use, they allow the operator to move a whole variety of packaged products, cardboard boxes and wooden cases quickly, accurately and safely throughout the working area.
Boxes can be picked either with suction tooling or with a pneumatic gripper head. Vacuum is created by either by an electric generator or by a ”Venturi” ejector.
The type, design, dimensions and picking system of the manipulators offered are tailored so as to suit the specific requirements of the user and to the varying environmental conditions available.
|
|
Handling attachment with vacuum pad. Indicated for handling of cardboard boxes or parcels.
It is the quickest and economic way for this kind of handling.
Vacuum generation by electric vane pump.
Max capacity 180 kg.
Accessories: quick disconnection for suction pads, angular adaptor, flexible extended manouvre handle, etc.
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
ANVER Vacuum Tube Lifters are easy to learn and simple to operate for loading and unloading cartons without manual lifting, bending, and stretching.
ANVER Vacuum Tube Lifters can be equipped with an extension handle that allows one person to unload and stack boxes without excessive reaching, stretching, or back strain. Models are offered to handle loads from 5 lb (2.3 kg) for non-porous loads, all the way up to 660 lb (300 kg).
|
|
With Protema lifts, difficult and potentially harmful lifting can be avoided and an ergonomic method of moving goods can be achieved. The first Protema lifter was developed in 1977. Today’s third generation lifts are a result of years of practical experience and development. Industrial kitchens, pharmacies, libraries and manufacturing companies use electric lifts to lift boxes, rolls, reels and other goods.
Lifting boxes
Protema lifts are manufactured with an emphasis on functionality, flexibility and reliability. They are lightweight, low-maintenance and battery driven with a built-in charger.
|
|
Lev 300
Capacities :
Grip width between 400 - 800 mm Lift height up to 3,00 m Max load = 300 kg up to 1,70 m Length of forks : 570 mm and 720 mm with sliding plates.
Description :
The LEV 600 and the LEV 300 have been designed to convey loads that cannot be handled with a conventional stacker. They are particularly suited for moving loads sitting directly on the floor
|
|
| ... products without technical information |
| |
Outline-flat filter exhaust
* Enclosure IP 43 to IP 54 (depending upon execution)
* Permission "Germanic Lloyd"
* Patented installation system "click and sits" for fast and screwless assembly
* Further technical details and special voltages on inquiry
|
|
|
The “FPF” series fan filters are widely recognised for their thin external profile, fashionable design, snap-mounting system and high performance. All models are Nema 12 and IP54 standard rated but, on request, alternatively available in Nema 3R and IP55 and also in EMC-shielded version.
|
|
-Very low noise
-Minimal depth in enclosure
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The high-performance axial fan provides high air circulation.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324
|
|
Filter fans and EMC-compatible filter fans
Product group P3
These devices have "blowing" function only. Function "suction" is always to be ordered separately.
As a standard, all other devices are delivered having the function "blowing". Function "suction" by turning around the motor.
|
|
COMMON FEATURES
The units allow a simple and cost effective solution for
enclosure cooling.
Designed for easy clip-on mounting and made out of high resistance, self extinguishing ABS UL94VO grade (RAL7035) they cover an air flow rate range from 35 m3/hr to 1100 m3/hr.
They provide an IP54 protection degree.
All the fans are mounted on ball bearings with MTBF of 40000 hours.
|
|
Seifert has relied on consequent engineering for the four actual EMC filter fan models which have a lot to offer: suppression of up to 100dB thanks to a metallized EMC grid, a high protecting rating of IP55 & an assembly frame for easy mounting. A special feature of the largest model is the use of 4 separate economical fans for more air volume & less noise.
suppression of80...100 dB (up to 300 MHz)
air volume 21...300 m³/h EMV (Standart up to 550 m³/h)
complete sealing frame
reversable design cover
suitable outlet filter
quick press-in mounting
|
|
Product group P3
Pivoting frame for directed ventilation
Electric data:
• Protection class I (ground wire)
• Protection type IP 20
• Connecting leads 0,5m 3x0,75 mm² PVC
Other lengths upon request
Utilizing a circulation fan avoids head accumulation and formation of heat pockets inside control cabinets. When heaters are installed, their efficiency is increased by circulation fans. The resulting air circulation dissipates heat through the surface of the cabinet and so, a cooling effect is achieved.
|
|
... see all the products in the category
Axial fans
|
|
|
see the results for the following category : 
