|
|
On target for each production process is to achieve the highest possible net product and to guarantee the defined quality of the product.
There are several reasons for reducing a product:
-after sack dipping station
-after dryer
-fried product
-recycling process
-enlargement of surface of product
-grinding process
-and further more
When choosing the right delumper, the efficiency of a production process can be significantly increased and production cost can be reduced.
Proof it by trying our test units!
|
|
The CRUSHER is installed at the extraction point of silos, hoppers, containers and allows the crushing of bulk or powder products which have been accumulated after a long storage period.
The CRUSHER enables these products to flow more easily. It is available in 3 versions : steel, stainless, aluminium.
|
|
Desagglomeration of powder blocs according to GMP standard.
Developped for the desagglomeration of powder blocs, the JetBreacker reduces the powder blocs to particles smaller than 10 mm.
Main advantages :
- GMP execution with CIP option
- Compact and mobile execution with bag discharge optionally
- Possibility to be connected to the loading station (silo or Big Bag)
- « High contained » solution up to OEB5
- High desagglomeration efficiency
- Excellent quality and price ration
- More than 15 systems in operation at customers side
|
|
Application
Desintegration of product agglomerates, lumps,...
Example:
* lumps formed in a silo
* filter cakes in front of a pneumatic conveyor
Working Principle
Product falls in the delumper. The lumps are hit by the rotor knives and forced through a grid. The fines pass straight through the grid.
|
|
Tuffer Aerator/Lump Breaker Series 329
The Tuffer aerator/lump breaker effectively reduces moist, semi-moist or dry solids down to grain size. The counter-rotation of the fast moving blades helps to reduce lumps with ease and aerates the material.
The result is a more consistent particle size and a fluffier bulk solid. Material will gravity feed and flow easier, improving overall handling efficiency.
Features:
Abrasion-resistant blades
Air purge shaft seals
Rugged construction
V-Belt drive
Low profile design
Self-cleaning
Low cost
|
|
Clod-crusher E600 knife
Crush and désagglomère the matters taken masses some or compressed.
Electra: INDUSTRIAL materials of crushing, mixes, handling, storage, proportioning, sifting and bagging
|
|
| ... products without technical information |
| |
Single Disc Grinding Machine
Features Overview
Grinding width: 250 mm
Special drive system for optimum load distribution
No need for manual finishing
|
|
Compact Grinder for Edges and Corners
Features Overview
180 mm grinding width
Working speed: 2.800 rpm
Ideal for corner and edge grinding
|
|
TCG 500 Electric/Petrol
Grinding of concrete surfaces. (Shopping malls, hospitals...)
Removal of old coatings and contaminates. (Factory floors, car parks...)
Scarifying to remove oil/dirt surfaces. (Airports, car parks...)
Ice removal from cold store floors. (Food processing plants...)
Grinding Terrazzo floor tiles.
Grinding resinuous based coatings.
Smoothing and levelling concrete before applying a new coating.
|
|
Standard feature includes self-propelled hydrostatic forward and reverse drive.
Suggested Uses
- Correcting Concrete Joints
- Slurry Cap Removal
- Lippage Removal
- Concrete Grooving for Anti-Slip
- Removal of Concrete High Spots
- Multiple Other Applications
Technical data
- Approx. Weight: 716 lbs
- Required Circuit: 460V
- FLA: 36/18
- Motor Output HP: 15 HP
- Cutting Width: up to 13", depending on number of blades and spacers
- Cutting Disc Dia.: 10"
- Length of Cord: 18 ft
- Cutting Disc Width Options: 0.110 x 10" (50 blades recommended)
|
|
To satisfy popular demand, VIC is manufacturing its own grinder and polisher that is highly productive, dependable and in-the-field repairable reducing down time and increasing profitability. Here are some key features of our system:
Key Features
High productivity
Flatter floors
Manufactured in the US at VIC International Corporation
Unique tilting head for easier diamond changing
Easier to load, unload and maneuver on floor
Designed to facilitate "in-field" repair
Built with readily available components
|
|
Anti-Vibration Hand Grinder
Features Overview
180 mm grinding width
Heavy duty 2,4kW Hitachi motor
Quick release wheel guard
|
|
CTR 650 M
Offering value for money, Against CTR 650 and CTR 650 S, there is manual feed into the cut and return. Compared to the competition in the category of manual band saws, it is the only one that has motorised blade height setting from the central control panel. The setting is single speed with an option of electronic measuring with the LG 100. All this significantly accelerates, facilitates, and makes more accurate the height setting of the saw blade.
CTR 650 GX
This version is fitted with a professional four-stroke engine HONDA GX 620. The high performance of the engine 14.7 kW (20 HP) guarantees high machine performance.
The engine has electronic ignition and manual starting.
Manual feed into the cut and back as with CTR 650 M. Also the simple height setting of the arm using a hand crank is manual.
|
|
|
|
|
|
CTR 650
Small but very professional band mill. The design of the main component units, such as guide wheels including their bearing system, design of the saw band arm, the drive system, the feed system, etc. are identical with the type series CTR 800 or even the high performance CTR 950 Hydraulik.
With this type, the central control panel is located on a moving bridge of the saw frame. This allows for a closer contact of the operator with the material during cutting.
CTR 650S
Different from the CTR 650, the central control panel is located on a fixed pillar attached to the machine bed. This allows for comfortable machine operation from one control point.
CTR 800
Vertical and horizontal band saw movement, with variable speed, controlled by a frequency converter. Electrically controlled vertical feed for
board thickness setting enables switching to fast feed (for bigger distances) and slow feed (for exact setting of the required board thickness).
If the required board thickness is selected on the LG-Automat (accessories), the band saw moves to the set value by fast feed and
automatically slows before 'overrun' and stops at the pre-set position with the accuracy of 0,1 mm.
- Electrically controlled horizontal band saw movement; forward and reverse feeds with infinitely variable speed are controlled by a frequency converter. Turning a single button enables an infinitely variable speed change during cut, depending on the timber cut. Feed speed continuously displayed on a digital display.
CTR 950 S
The same structure as with the CTR 950 Hydraulik, but without the hydraulic equipment. Clamping and handling of the cut material is manual. This solution allows for purchasing of a value for money professional machine for cutting of large diameter trunks.
Within the scope of the unique modular system of the CTR type series, even this machine is equipped with all clamping points for additional installation of complete hydraulic accessories.
|
|
|
|
|
|
CTR 800 Hydraulic
Design wise, it is based on the popular model CTR 800 S that is housed on a raised travel frame that allows for installation of complete hydraulic accessories.
Handling of the timber using the hydraulic accessories significantly increases machine productivity. At the same time, it saves labour costs, because the machine control and handling even of very heavy timber can be performed by one employee.
The extension sections with a cutting length of 3 metres allow for installation of hydraulic accessories according to your requirements.
Machine control is identical to type CTR 800 S. At the central control panel, there is also the control of the complete hydraulic accessories.
CTR 950 & CTR 1300 Hydraulic
The very robust machine structure allows for installation of powerful hydraulic accessories that easily handles even very heavy timber.
Two way guidance of the bridge frame on the travel section in combination with a strong motor allows for smooth and quick pulling of even heavy cut pieces while using the sawn timber material feeder.
The machine is equipped with rapid travel of the bridge frame with automatic deceleration at end positions.
The extension sections with cutting lengths of 2, 4, and 6 metres allow for installation of hydraulic accessories according to your requirements.
The basic travel section and the extension sections are equipped with many clamping points for installation of hydraulic accessories, which allows for large flexibility during the design for the customers exact requirements.
|
|
| ... products without technical information |
| |
The firms BKM Bolender Maschinenkonstruktion GmbH and
Gerd Wolff Maschinenfabrik GmbH (Hagen-Germany)
Spezialists in strip mills and special machines for the steel fabrication.
Our product offering ranges from simple models to highly sophisticated designs: for rolling, cut-to-length line, conveying coils, bundles and strip material of hot wide strip, medium strip, cold roll machine, distal steel sheet, slit strip, electric strip
*Rolling mill
*Strip mill
*Mill stands for cold rolling
*cut-to-length line
*High performance slitting line
*Pickling and tempering lines
*Traversing spoolers
*Packaging lines
*Coiling lines
Compact slitting lines
Equipment for cold rolling mills and Service-Center:
We have - or develop - the right components and equipment for any task, for example:
*Straightening machines
*Hydraulic shears
*Annealing hoods
*C-hooks
*Conveyor racks
*Coil decoupler
*Coil tilting fixture
*Coil tumbler
*Reel
*Decoiler
Service & Maintenance:
*Inspection
*Repair
*Training
|
|
We design and produce gearboxes and machines for the steel and non ferrous metals industry:
- gearboxes for roll stands
- shears
|
|
BWG supplies strip processing lines for the steel, stainless steel and aluminum industries.
We cover a strip thickness range from approx. 0.05 mm through 16 mm, strip width up to approx. 2,300 mm and process speeds up to and over 600 m/min. Our strip processing lines are renowned in the industry for their innovative solutions with outstanding process results, their high uptime availability in conjunction with a high level of automation, robustness and maintenance-friendliness.
|
|
| ... products without technical information |
| |
The Atritor DCM Mill is one of the most universal milling systems available with independently driven grinding and classifying sections.
It has a wide range of applications producing materials in some instances to less than 15 microns.
Feed material is metered into the mill pneumatically and first passes into the classifier zone where any fraction of the feed that is already inside specification is removed as product, thus avoiding any over-grinding. Oversize is recycled internally to the grinding zone and is returned to the classifier after further size reduction. This process produces a steep size distribution curve.
Adjustment of the classifier speed controls the size of the product leaving the mill. The product is conveyed pneumatically to a collecting cyclone and/or bag filter. With the application of heat to the inlet air flow, simultaneous drying can be undertaken.
|
|
Rhodax crusher
Principle
In-bed compressive grinding
Advantages
On load and on line setting
Non sensitive to tramp iron
Low wear rate
Stable quality of ground product fineness
Selective grinding and classification of the Fines which preserve hard grains.
|
|
Feature
It's suitable for any powder, granule and liquid. Easy operation and powder won't fly out. Screen could be changed speedily.
Application
Foodstuff, Chemical, Medicine, Mineral, Rubber, Plastic, Metal and the Kinds of Environmental ProtectionKetc.
|
|
The shredder pump is used to chop material as it enters the pump to keep the solids from clogging the discharge pipelines. This pump is typically used on municipal, industrial and agricultural waste pumping application.
• Maximum output up to 3,000 lpm (800 gpm)
• Discharge size 101 mm (4 inch)
• Open-Vane Shredder Impeller with Tungsten Carbide Cutting Tip
• Hardened Macerator Suction Plate
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Versions for Portable or Fixed Installations
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT15 to HT25 power units or other hydraulic power sources capable of flows of 10 - 15 GPM
|
|
|
|
see the results for the following category : 
