|
|
The unique MCPI’s Multi Channel Feeder, is probably the best solution on the market, to give a simultaneous, quick and accurate dosing of ingredient on multiple application points, with sprinkling effect.
These feeders are controlled with motor rpm and outlet section of extractor. MCPI’s “Short-cut system” is mechatronic solutions which ensure a perfect control of the extractor movement with repeatability below 3/100 sec, to ensure quick and accurate feeding.
This range of machines is an efficient cost effective solution for high cadencies productions (dosing time from 0.2 sec, up to 60 dosing cycles / min). The feeder can be fit on “C” shape mobile truck, to facilitate cleaning operations.
Design of these feeders is made in agreement with drug and food industries requests for cleaning.
For more detail, see enclosed PDF data sheet
|
|
Volumetric dosers in a flexible configuration
Single or double-station volumetric dosing units, with a throughput ranging from 0.005 up to 150 kg/h. Designed to dose masterbatch, additives and regrind into the plastification screw.
Customer oriented solutions:
A single unit covers a wide production range:
- the rich selection of screws and gear boxes allows multiple requirements to be met
Utmost versatility of use:
- it is possible to easily transfer the dosing station on other IMMs and start up production immediately.
Minimised operator interventions
- cleaning and maintenance operations are simple and require just a few minutes.
No material wastage
- The space-saving design of the central block results into no material wastage at the initial and final phases of the production job
Maximum ease of use
- The combination of the construction solutions adopted and the user-friendly software ensures maximum ease of use
|
|
Advantages of Gericke Volumetric Screw Feeders
+ High dosing accuracy
+ dosing pipe and spiral/screw fast against other size/sizes of exchangeably
+ simple cleaning
+ durable design and nearly unlimited life span
+ complete from stainless material manufactured (except drive unit)
+ extended dosing set up to several meters of length possible
|
|
In principle, volumetric feeding is the simplest, most economical feeding solution available. Bulk material is held in a hopper and constantly fed into a process per unit of time. A gravimetric feed rate may be inferred through a calibration process where a timed sample is taken and weighed, and screw speed adjusted accordingly. Although there is no weight feedback to assure feeding accuracy over time, this may not be a concern for materials with consistent bulk density.
K-Tron offers three choices in volumetric feeders: the highly accurate bulk solids pump (BSP), single screw feeders and twin screw feeders. K-Tron volumetric feeders come in a wide variety of of sizes and configurations to meet your application requirements.
|
|
The ZFP/DM model is a mechanical discharge and metering unit for powders stored in bulk. It can be fitted under any bottom hopper.
The storage capacities can be from 50 litres up to 5 cubic metres. It caters for outputs from a few l/h up to 15 m3/h according to the product.
Its design provides many possibilities :
· material (mild stell, stainless steel, PEHD)
· fixed or variable throughputs
· single or multiple metering conveyors, rigid or flexible
· numerous discharge diameters (350, 500, 800, 1000, 1250 mm)
· numerous options (lid, grid, supports, switches, inspection hatch, etc...)
ADVANTAGES
Mechanical discharge, without air or vibration, therefore without contamination or compaction.
Low power consumption.
Totally sealed and dustproof, quiet in operation.
Ease of installation with flexible conveyor.
APPLICATIONS
Sack-emptying hopper
Buffer hopper
Discharge from Big-Bag or container
|
|
Regularity of proportioning
Proportioning of difficult products
Devoutor adapted to the product
Design facilitating cleaning
The system of dévoûtage fulfills with him only the functions of perfect filling of the screw of proportioning and dévoûtage in the tank.
Solutions of fast disassembling were especially studied to support cleaning.
The materials used are selected according to the characteristics of the product to proportion.
Principles
A cylindrical tank equipped with a devoutor and a mechanical system of proportioning without air nor vibration allowing to proportion any type of products in powder form or granulated.
The output control is obtained by variation speed on the system of proportioning. The cramming of the system of proportioning is carried out by the devoutor who fulfills this function, while dévoûtant the product in the hopper.
Examples of treated products
Dry flours, powder cocoa, fruits, frozen talc, salt, sugar, vegetables, sulfur, metallic oxides, dry grapes, almonds, pigments, pellets, fibers
|
|
Suitable for packaging granular and other homogeneous, easy-to-transport products like : sugar, salt, rice, coffee, bird feed, dried fruit, washing powder, pasta.
DV200 AND DM200 VOLUMETRIC FILLING MACHINES
To fit onto bagging machines or semiautomatic versions, with stands and work tables.
Features
Operate independently from the bagging machine
Telescopic containers adjustable for a proportional volume from 1 to 2.
Closing with a flap
Interchangeable containers
Electronic control of discharge point
Poss. build in a servo for automatic container adjustment, enabling synchronisation with a weight controller
A set of stainless steel containers
Optional equipment:
Extra set of buckets
Servo motor to regulate automatically the capacity of cups
All-stainless steel build
Special hopper with a stirrer for difficult products
Rotating brush
Level sensing device
|
|
It is, with the transfer, the oldest know-how of Spiroflux.
The dispenser on ground DRD, first of all, was one of the "products headlight" of the company. We manufactured some more than 2500 specimens, and always let us manufacture we, although gravimetric measuring makes him competition cruelly.
Practical, allowing the désachage matter, particularly robust,... it still remains to him of beautiful days in front of him, in France as with export.
The dispensers of colorants, then, such as FD and DCU are very competitive equipment (price/quality) which forges the reputation of Spiroflux.
Sold directly on catalog, they are held in stock (like their spare parts), and thus quickly operational at the customer.
|
|
Fully automatic polyelectrolyte solution system for granular and concentrated liquid polyelectrolyte (for other products on request).
Designed as two-chamber pendulum system. Our systems achieve a reliably high quality in preparing polyelectrolytes while saving resources as much as possible.
|
|
Weighfiller
For automatic and precise dosing of dry, free-flowing products
Liebel Dosing systems LDS 1, LDS 2 and LDS 3 (single, twin, and triple linear weigh fillers) can be used for high precision dosing of powder, grain, granulate and chunky product. This can be herbs, teas, spices, coffee, sugar, wheat, pharmaceutical products, screws, bolts etc …. Our industrial standards guarantee excellent precision together with unsurpassed reliability over many years of life-span. Stainless steel finishings with polished surfaces and a high ground clearance permit excellent cleaning properties.
- Complete finish in stainless steel
- Adaptive controller with self-learning limiter and dosing speed
- 25 memory cells for different articles
- The dosing channels are adjustable to cope with very different product dimensions and attributes, optional also from memory
- Open design, easy to clean
- Also available as “multi-construction“ for high capacities or product mixtures
- Either manual handling or synchronization with packing machines
|
|
|
Volumetric dosing and mixing unit designed for dosing of virgin materials, regrind, masterbatch and other additives. A unique in-built conveying system ensures a stable and continuous supply of raw materials. Suitable for any injection moulding, extrusion and blow-moulding applications.
|
|
VOLLMAR®
- Volumetric Dosing and Mixing Unit VOLMIX E 30 LC
Volumetric, continuously operating dosing and mixing unit
Machine-dependent unit
Free flow supply of main component and dosed addition of max. 2 auxiliary components
Also for use on injection moulding machines and extruders
4 interchangeable dosing screws for different throughput ranges (from 0.3 to 27 kg/h)
Easy and quick cleaning when changing formula
Operator-friendly micro-processor control unit with:
- digital adjustment of all parameters
- 16-digit alphanumeric LC display
- data memory on electrically erasable EEPROM
Fault display by means of LED and in plain text on the LC display
Options:
- manual or automatic feeding of the dosing stations
- reduction hopper
- volume extension
|
|
| ... products without technical information |
| |
|
|
see the results for the following category