|
|
Eclipse Air Heat Burners are line type burners ideal for generating large volumes of clean, hot air. Applications include ovens, dryers, fume incinerators, and similar industrial equipment.
The "AH" models feature an integral combustion air blower mounted on the back of the burner’s steel case. By supplying the correct air volume and pressure to the burner, the blower allows stable operation over a wide range of duct velocities without installing a profile plate around the burner.
|
|
|
These burners provide close coupling of radiant heat sources for use in "line" arrangements where relatively "light" heating jobs are to be performed. Designed essentially for heating moving webs, line burners also find frequent application in ovens, as well as in heating stationary objects. The 500 Series is available in a variety of cup configurations to permit several self-piloting geometric arrangements. The small 200 Series and large 700 Series, however, are currently available for straightline use only.
|
|
The Eclipse Minnox burner utilizes a premixed gas/air mixture with excess air; the resulting low flame temperature of 1200°C (2200°F) produces extremely low NOx discharge from the burner head. A modular designed gas/air mixer is adapted to the burner manifold in various configurations.
The flame is protected by a stainless steel shroud which insures good combustion without being influenced by process air. Burner capacities are available from 125 to 4000 kW (430,000 to 13.6 million Btu/hr.); higher capacities can be designed for special applications.
|
|
MAXON CROSSFIRE® Low NOx Burners comply to the world's toughest air quality standards for NOx and CO by cleanly combusting gaseous fuels. CROSSFIRE® Burners are nozzle-mixing, modular line burners designed for a variety of fresh and re-circulated industrial air process heating applications. The low NOx burner is available in straight, grid, and insert cartridge sections which are used to spread heat across your duct for very uniform temperature distributions.
The CROSSFIRE® Burner can be designed within a system to allow for up to 2,500,000 BTU/hr/ft while producing extremely low emissions of both NOx and CO. You can combine CROSSFIRE® Low NOx Burners with Smartfire® Intelligent Combustion Controls for optimal control of emissions and efficiency.
|
|
|
MAXON Series "NP" and "RG" AIRFLO® Industrial Burners provide clean, direct fired air heating to optimize process air heating efficiency. The modular natural gas burners install easily with custom built patterns to fit your duct. NP and RG burners burn cleanly with most gaseous fuels and offer high heat releases per foot with wide turndown ratios.
|
|
|
MAXON APX® Natural Gas Burners are packaged nozzle mixing line burners designed for fresh or low temperature re-circulated air heating applications. The APX® Industrial Burner is a value engineered design utilizing a single aluminum extrusion for both its air and fuel manifolds. Its single-piece, joint-less body design provides standard straight gas burners up to 40 feet, H-shaped burners, and grid shaped burners engineered to your specification. APX® burner construction provides years of maintenance free operation and lower cost of ownership than any other alternative.
|
|
Slopes ASK are gas-burners flame car stabilized and high speed of exit. They can function in a room temperature of 550°C.
Characteristics:
POWER:
Total ventilation - 30 kw with the linear meter (for a pressure of mixture of 15 mm E.C. for mixer with puffed up or mixing air atmospheric under 1 bar).
FOOD GAS:
- Gas average pressure 0,3 to 2 bars (atmospheric mixer)
- Gas low pressure (mixing with puffed up air)
- All gases
|
|
| ... products without technical information |
| |
Composite tube manufacturing lines
Aluminum-plastic composite tubes are constantly being used in new applications. The reasons are quick installation, corrosion-resistance, and last but not least, lower costs. Hot /cold water pipes and chemical tubes are but a few of the many possible applications. DREISTERN cooperates with the leading extrusion manufacturer MAILLEFER Ecublens (CH) and supplies turn-key machines for very high productivity.
|
|
Turn-key solutions - Solartechnology
MiniTec offers automatic assemblylines for this very sophisticated process including industrial images processing, automatic test stations, framing stations and many approved solutions for damage free module handling.
|
|
Cutting machines
Automatique cross cutter ZA 430 the convenient cross cutter for paper, cardboard and film rolls, with a slitting system for film as an option. The number and length of the sheets can be preset. Operating instructions in plain language make handling easy.
|
|
Hugo Beck supplies inserting machines for collating magazines and catalogues with one and/or several loose inserts of various kinds in the output range up to 15.000 cycles/hour.
Selective feeding and identification are also included in the delivery scope as is the colation of stacks.
|
|
CutMaster F 2200 ST
Folio sheeter
tandem piler version ST
CutMaster F 2200 S
Folio sheeter
single piler version S
Applications:
Folio-size sheeting - paper
|
|
| ... products without technical information |
| |
|
The processing plant is able to produce soluble ( powder ) and instant ( agglomerated ) coffee starting from green coffee beans. The line includes equipments for raw coffee cleaning, roasting, grinding, liquor extraction, aroma recovery, concentration, spray-drying and agglomeration. Each solution is tailor-made to conform to client's needs. The process control can have different automation levels and can also be completely automatic. Besides coffee, ICF & Welko Special Plants can supply complete processing lines for the production of soluble barley powder.
|
|
|
The processing plant produces Instant Milk powder starting from raw milk. A standard line includes the following sections: raw milk receiving and cooling, pasteurization and skimming, concentration, spray-drying and agglomeration. Every section of the processing plant complies with the strict hygienic standards and specifications required for the dairy industry and is usually coupled with CIP cleaning systems. Each processing plant is tailor-made and designed to meet specific customer's needs. Besides milk, ICF & Welko Special Plants can supply complete lines for the production of whey, whey-proteins and permeate powder.
|
|
|
|
|
|
Process monitoring is essential when it comes to achieving consistent, uniform quality and products with a long shelf life. Production on our fully automated minced meat production lines is managed by a central recipe management system which ensures full traceability throughout the process, superior quality and uniformity of finished products.
Integrated online fat analysis measures the fat content of the meat as it leaves the grinder at capacities of up to 20 tonnes/hour. Fat analysis is an essential factor in the optimisation of each individual batch and the method saves time in that it renders tradition laboratory testing superfluous.
The fat analysis system is based on contact-free technology, thus contributing to improved bacteriology and optimum production hygiene. In addition to this, hygienic construction is one of the overall important criteria in Carnitech's manufacture of minced meat production lines which ensure that our customers get the best possible conditions with regard to producing safe foods.
|
|
Over the years, we have developed some of the world's most highly automated sausage production lines. Already at the factory layout design stage, great importance is attached to manpower savings, high efficiency and flexibility, which is why our equipment is conducive to modern production which does not compromise in terms of quality and the finished product.
The core of the Carnitech line is the fat analysis unit, which constantly monitors every single type of meat being mixed in a given batch. The high capacity fat analyser continuously monitors meat between -18° and +7°C, after which the fat level is adjusted to achieve the precise fat percentage required for each batch and each individual sausage.
The ability to co-ordinate operation of the system from the grinder, past the fat analyser to the feeding bin provide undreamed of scope in terms of recipe and product composition and with it tremendous production flexibility when it comes to changing products.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
