|
|
2.500-22.000 Kw/h
DOUBLE FUEL NATURAL GAS BURNERS
MODEL RX-RT
PLEASE WRITE ALL ENQUIRIES IN ENGLISH ONLY
|
|
1480 SERIES HOT OR COLD AIR, HIGH VELOCITY, HIGH MOMENTUM BURNER
CAPABILITIES Suitable for low furnace operating temperature through 2500°F (1371°C) with standard design Standard burner designed for cold air or hot air to 800°F(427°C) operation Wide operating range from over 2000% excess air levels through excess fuel Very high velocity (momentum) burner Nominal capacity from less than 250,000 to 1.5 million BTU/hour at 10% excess air For use with most gaseous fuels with heating values above 250 BTU/cubic foot Suitable for most construction designs including light wall Custom engineered models available
|
|
2000 SERIES HTR® COLD AIR BURNER
CAPABILITIES High thermal release High temperature radiation without flame impingement Ability to place heat where required High turn down capacity Nominal capacity range 100,000 to 4.4 mm Btu/hr
FEATURES
Patented Stabilization Principle* high temperature radiation through high speed combustion Extra rugged port block and mounting plate construction Integral fuel orifices eliminates the need for individual gas balancing or throttle valves
|
|
Burners for gas BIC
Burners with cast steel housing, connection for ceramic tube provided.
Burner size: 50 to 140,
capacity: 10 to 360 kW,
flame shape: normal flame or long, soft flame,
gas type: natural gas, town gas or LPG,
length of burner tube: depending on ceramic tube,
connection:
gas: thread,
air: thread or flange.
The following versions are available:rnburner with integrated ignition lance.
Burners for gas ZIC
Burners with steel-plate housing, connection for ceramic tube provided.
Burner size: 165 and 200,
capacity: 630 and 1000 kW,
flame shape: normal flame or long, soft flame,
gas type: natural gas, town gas or LPG,
length of burner tube: depending on ceramic tube,
connection:
gas: thread,
air: flange.
The following versions are available:
burner with integrated ignition lance.
|
|
MAXON's OVENPAK® 400 Series is the world's most flexible and reliable industrial burner. The OVENPAK® burns most any fuel gas and requires only low pressure fuel. This natural gas burner provides clean combustion with low NOx levels while providing unmatched turndown.
OVENPAK® Gas Burners provide outstanding performance in ovens and dryers, paint finishing lines, paper and textile machines, food baking ovens, coffee roasters, grain dryers, and fume incinerators.
|
|
SBM proposes a wide range of infrared gas burners
- stainless steel construction
- instant heat
- long life ceramics
for following applications :
- rotisseries
- doner kebab
- baking ovens
- drying ovens, …
|
|
MONOBLOCK GAS, OIL BURNERSAND DUAL FUEL BURNERS
Production as per DIN 4787-4788 and European standards
CE and other Certificates
- Low emission values
- Silent operation
- Superior Design
- High efficiency
- High technology
|
|
The experience gained in contact with the professionals, enabled us to develop a new generation of burners combining improvement of the performances, precision and reliability of the adjustments. The design, the development, construction are organized according to European Standards' EN 676 for the burners. Burners CUENOD are manufactured under quality assurance ISO 9002 certified by the AFAQ.
As all CUENOD burners NC.4 GX - NC.6 GX - NC.9 GX are thus in conformity with the European Directives with regard to them, in particular with the Directive Output 92/42 the EEC when they are installed on boiler shells EC.
|
|
Medium output burners used in heating
systems must meet five essential
requirements:
- simple implementation,
- easy operation,
- reliable and efficient settings,
- rational use of energy,
- low pollution emissions.
C.24 GX - C.30 GX burners are equipped with the innovative MDE® system, which allows technicians to query the burner at any time and obtain operating information and details of startup phases.
Burners are designed, developed and built in compliance with the European standards EN 676.
CUENOD burners are manufactured in compliance with the quality assurance certificate AFAQ ISO 9002.
All CUENOD burners bear the mark CE, indicating compliance with the relevant European Directives, including the Efficiency Directive 92/42 EEC, when installed on CE boiler shells.
|
|
In fields as varied as district heating, services, small industries and the agribusiness industry, the priority in fuel burners is that they:
- are easy to install,
- guarantee reliable adjustment,
- use energy economically,
- minimize pollution emissions
- simplify operations.
With this aim in view, the NC.12 - NC.16 et NC.21 burners are fitted with the RTC® System, MDE® System, IME® system and the AGP® system.
Burners are designed, developed and built in compliance with the European standard EN 676. CUENOD burners are manufactured in compliance with the quality assurance certificate AFAQ ISO 9002. As for all CUENOD burners, the NC.12, NC.16 and NC.21 models have received EC certification, as they comply with the requirements of the relative European directives:
- Gas burner directive 90/396/EEC
- Machinery Directive 89/392/EEC
- EMC Directive 89/336/EEC
- Low voltage 73/23/EEC
- Efficiency Directive, when burners are installed on EC boilers.
|
|
|
In industrial heating today, a successful installation demands careful consideration of efficiencies, emissions, process optimization, and loss prevention. MAXON provides the most complete line of industrial burners including natural gas burners, low NOx burners, and complete industrial burner systems to ensure your successful heating solution. Backed by a worldwide staff of combustion engineers, MAXON is your smart choice for value, reliability, and performance.
|
|
|
In industrial heating today, a successful installation demands careful consideration of efficiencies, emissions, process optimization, and loss prevention. ECOSTAR provides the most complete line of industrial burners including natural gas burners, low NOx burners, and complete industrial burner systems to ensure your successful heating solution. Backed by a worldwide staff of combustion engineers, ECOSTAR is your smart choice for value, reliability, and performance.
|
|
|
The CYCLOMAX® Low NOx Burner provides clean combustion with NOx emission levels below 25 ppm and CO levels less than 75 ppm. Lower emissions may be possible based on application. The integral fan version of this industrial burner is available in 5 sizes (up to 3,700,000 Btu/hr) and the EBMRV version is available in 4 sizes (up to 7,400,000 Btu/hr).
|
|
|
Selas low NOx flat flame wall burners are ideal for fiber or brick furnace settings. They install quickly and easily into new equipment and are cost-effective retrofits for existing furnaces. Our low NOx burners meet the strict nitrogen oxide requirements of the petrochemical industry.
|
|
It was the first precalciner to include a multichannel
Low-NOx BURNER, a combustion chamber without SWIRL, meal fed as a suspension, efficient and progressive mixing.
Very low reactivity coal
Owing to the high-performance burner, low reactivity fuel is possible, such as anthracite coal.
Burn
Oil, coal, petcoke, anthracite, natural gas, plastic chips, ...
Low Nox emissions
The original aeraulics design and the low-NOx burner allow very low NOx emissions.
Reach
Lower NOx emissions of burning systems.
Smooth and safe operation
The controlled flame and progressive mixing ensure safe ignition and refractory long life.
A flexible design
The goose neck length gives the necessary residence time adapted to the reactivity of the fuel.
|
|
Safely supplying pressurized fuel to industrial burners demands attention to detail, quality components and professional engineering. Maxon fuel trains and supply skids assure your installation of trouble free operation in professionally built packages.
For gas and oil burners, Maxon fuel trains may be standard built or custom-built including :
Designs to comply with industry' most rigorous demands
Construction to meet local safety standards & directives for your area
Components selected for best performance and minimum maintenance
Leak- and function-tested prior to shipment for quality assurance
Accompanying required certificates where required for smooth hand-over on site
|
|
|
|
|
|
Furnnox Low Emission Furnace Burner
The Eclipse Furnnox is a low-NOx direct fired furnace burner. The exclusive design provides low emissions in high temperature applications. The Furnnox is capable of producing NOx emissions less than 30 ppm at 3% O2 in most high temperature furnace applications. To achieve high efficiency, the burners are controlled on-ratio throughout the operating range and can be operated with combustion temperatures as high as 1,100°F (600°C).
• Integrated gas and air orifices simplify
burner piping, set-up and adjustment.
• Air and gas inlets are independently
adjustable in 90° increments to suit
a variety of piping alternatives.
• Installation, operation, and maintenance
are simplified and less costly.
• Made to last…rugged Eclipse
dependability and reliability are
built in.
• Available in five sizes up to a capacity
of 1,500,000 BTU/hr (440kW).
The Furnnox offers the convenience of multi-fuel capability with no nozzle change. It can be fired on natural gas, propane and butane. With the Furnnox, you can light anywhere in the ignition range with no pilot required.
|
|
Low NOx Burners
SLS™ Technology
MAXON Corporation believes in responsible, intelligent use of energy to produce a better quality of life for everyone, worldwide. We invest in developing innovative technology and the best combustion minds to deliver clean, efficient solutions for our customers. MAXON products feature robust technology, delivered in a practical way, because it's the responsible thing to do for the environment and the population.
SLS™ Technology reduces NOx in industrial burners by reducing prompt NOx formation in the reacting flow field. This advanced technology is an innovative method to merge stabilized, lean premix technology with flexible nozzle mix advantages. Covered by two US patents, the SLS™ Technology in MAXON products produces extremely low emission of NOx and CO without sacrificing performance or reliability. Look for the SLS™ tag on MAXON burners like the M-PAKT™ Ultra Low Emission Burner.
|
|
|
Hauck's BBG Gas Beta Burner is designed for exceptionally long life in continuous or intermittent operation in furnace, kiln and dryer environments. The BBG is well suited for applications operating under backpressure. Burner capacities range from 2.2 million to more than 87 million Btu/hr (645 to 25,500 kW). Preheated air versions are available up to 900°F (480°C). The BBG is designed to operate on any clean industrial fuel gas with a higher heating value of 500 Btu/scf (19.7MJ/nm³) or greater with ambient or preheated combustion air. Available with a converging alloy tile for ambient combustion air only for temperatures up to 1800°F (980°C), and converging or diverging refractory tiles for temperatures up to 2800°F (1540°C).
|
|
Burner with against standard rotation BCR
Burner with ouvreau, intensive Combustion, gas Applications high temperature
Characteristics:
- Simple and robust Design
- Great flexibility of operation
- Range of power of 50 kw to 12 MW
- Ouvreau castable refractory concrete or steel
- Intensive Combustion even with low mode
- Excellent behavior of flame
- Important Beach of the adjustment air/gas
|
|
D-HG 400 High Energy Ignition Device
The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any capacity
Features
Ignition of liquid or gaseous fuels with large power ratings
Compact design: control unit and ignition lance form one unit
Ignites even heavy oil no. 6
Special designs for potentially explosive atmospheres are available
Special design with battery operation
Special design for swivelling burner
No wear because thyristor controlled
20 ignition sparks á 4.5 J per second
Ignition feedback signal via integrated LED or potential-free relay output
Suitable as "Ignitor Class 3 Special“ in accordance with NFPA 8501 and NFPA 8502
Applications
Chemical industry
Refineries
Cement plants
Waste incinerators
Steam generators
Heating plants
|
|
|
|
|
|
The purpose of an ignitor is to supply the necessary heat release for startingup an industrial burner.
Taking advantage of over 80 years expertise in combustion, PILLARD propose a wide range of electricgas ignitors which may fit all types of burners for boilers, refinery heaters, process furnaces, hot gas generators,
rotary kilns, and reactors of Claus units.
The PACKLIGHT ignitor fires on natural gas or propane.
Its particularity is to incorporate the high voltage transformer in its rear
housing generating the lightingup spark, as well as the ionization
electrode ; the self-checking ionization detector (type PILLARD “IONY” leaflet n° 0202) allows the presence of the ignitor’s flame to be permanently monitored.
The PACKLIGHT ignitors join together the following advantages :
• Ability to supply a heat release of up to 19 kW (400 kW in special
version).
• Incorporation in the rear housing of the high voltage transformer and
the ionization self-checking detector which simplifies installation.
• Display of ionization detection level and gas pressure, which eases
commissioning and maintenance.
• Plug-in connexion which eases maintenance.
• Sturdy and compact construction.
• Easy and quick replacement of the complete rear housing, which eases
maintenance.
• Available with or without external air feed, operation as intermittent
ignitor or permanent pilot, and available in EXPLOSION PROOF
version.
|
|
| ... products without technical information |
| |
|
|