|
|
paragon
TYPE 105F1-1 Integrated Flame Scanner and Temperature Analyzer. Paragon scanner provides high integrity sensing of multiple flame properties, including Amplitude, Flicker Frequency and Flame Learned vs. Stored Curve Fitting.
|
|
|
|
|
|
WINDOW 141 FLAME SCANNING SYSTEM
The PIA WINDOW 141 flame scanning system uses proven flame scanning technology which combines a simultaneous UV and IR detection, with the latest flash memory microcontroller.
The system includes:
A single scanner head having a combination of UV tube (ultraviolet), a high speed IR cell (infrared), and a window which allows a direct visual sight to the scanned flame through the same hole used by the sensors. It can detect coal, oil, gas and other non standard fires.
A signal processing module handling independently both UV and IR signals received from the scanner head. It displays absolute frequency counts and the strength (relative to adjustment) of UV and IR signals. A flame strength output of 0-20mA or 4-20mA, UV and IR flame on relays, and a fault relay transmit their data to your burner management system.
A chassis (mounting rack) providing termination hardware for all the wiring and 1 to 8 slots to quickly plug and remove the scanner modules.
A plug in data terminal DT-1 to program and diagnose the signal processing module, so only the operator having the DT-1 can modify
the module adjustments.
An optional FS-2 flame source to simulate an adjustable flame signal containing UV and IR light for testing the system on the field.
|
|
A combination of independant UV (ultraviolet) and IR (infrared) flame detection plus a direct visual sight to the scanned flame in a single scanner head.
The advantages of the WINDOW 141 head are:
Pure UV detection (220nm peak): not affected by visible and sunlight radiations like a Si UV enhanced system would.
IR detection (1 550nm peak) very stable: not affected by visible radiations and temperature variations like for the Ge, PbS or other IR cells.
For easy installation, a ball swivel mounting on the burner front allows adjustment of the viewing angle. Standard 1'' NPT connections are used for the ball swivel and scanner head.
The visible section of the radiation is only for visual observation through the WINDOW (patented).The following can be observed:
Sight alignment
Flame quality
Lens cleanness
Operation of the shutter
Inside UV and IR LEDs
|
|
A combination of independant UV (ultraviolet) and IR (infrared) flame detection plus a direct visual sight to the scanned flame in a single scanner head.
The advantages of the WINDOW 141 head are:
Pure UV detection (220nm peak): not affected by visible and sunlight radiations like a Si UV enhanced system would.
IR detection (1 550nm peak) very stable: not affected by visible radiations and temperature variations like for the Ge, PbS or other IR cells.
For easy installation, a ball swivel mounting on the burner front allows adjustment of the viewing angle. Standard 1'' NPT connections are used for the ball swivel and scanner head.
The visible section of the radiation is only for visual observation through the WINDOW (patented).The following can be observed:
Sight alignment
Flame quality
Lens cleanness
Operation of the shutter
Inside UV and IR LEDs
|
|
Flame detector for continuous operation IFW 50
Flame detector for flame signalling or for multi-flame control in conjunction with IFD 450/454, for continuous operation, ionisation control.
Mains voltage: switchable from 220/240 V AC to 110/120 V AC, for earthed or unearthed mains.
Flame detector IFW 15
Flame detector for flame signalling or for multi-flame control in conjunction with IFS 110/111IM, for intermittent operation, ionisation or UV control. For earthed or unearthed mains, mains voltage:110/120 V AC or 220/240 V AC.
Flame detectors PFF
Flame detector in 19" standard rack for multi-flame control in conjunction with PFS/PFD or for flame signalling.
PFF 704: for intermittent operation, ionisation or UV control,
PFF 754: for continuous operation, ionisation control,
with 4 independent flame amplifiers,
mains voltage: switchable from 220/240 V AC to 110/120 V AC, for earthed or unearthed mains.
|
|
Compact Flame Monitor D-LX 100
Self-monitoring and fail-safe compact flame monitor for the monitoring of gas, oil and coal flames with integrated UV, VIS or IR flame sensor, primarily in single burner furnaces
Features
Suitable for continuous operation and 72-hour operation according to TRD 604
Compact design, flame sensor and control unit in one enclosure, takes up no space in control cabinet
LED display for settings and operational status
ATEX approved (D-LX 100 Ex)
Applications
Power stations
Chemische Industrie
Refineries
Cement plants
Waste incinerators
Steam generators
Heating plants.
|
|
Infra-red Flame Monitor D-IR 55
Infra-red flame monitor for intermittent operation.
Analyses flame intensity (flickering) in conjunction with the D-LE 55 ISF-CG flame sensor
Features
monitoring of gas and oil burners of any load
suitable for intermittent operation
simple installation on TS 35 DIN-rail
Application
Chemical industry
Refineries
Cement plants
Waste incinerators
Steam generator
Heating plants
|
|
UV Flame Monitor D-UV 55
UV flame monitor for intermittent operation.
Analyses the flame intensity in conjunction with the D-LE 55 UL-CG flame sensor
Features
monitoring of gas and oil burners of any load
suitable for intermittent operation and continuous operation (only D-IO 55-20)
simple installation on TS 35 DIN-rail
Applications
Chemical industry
Refineries
Cement plants
Waste incinerators
Steam generators
Heating plants
|
|
|
|
|
|
The self-checking SAFYR PACKSCAN flame detectors are designed for monitoring solid or liquid fuel burners (oil, pulverised coal, heavy liquid residues). They are adapted for multi-burner installations by facilitating flame discrimination.
A binary safety signal is transmitted in the presence or absence of a flame. The output signal is also available on terminals for recording or remote display purposes.
Operation of the SAFYR PACKSCAN flame detector is based on the characteristic flickering phenomena of flames, generally between 0 to 150HZ. It uses a silicium photodiode cell, adapted to the combustion frequency in the visible light band (320 to 1100nm).
A display indicates all the configured parameters, as well as the detection level.
30 years of experience in the field of flame detection gives the SAFYR PACKSCAN the following advantages :
• An ‘all in one concept’ with an integrated amplifier in the scanner head for easy installation.
• Two microprocessors for increased safety and reliability.
• Approved by APAVE to meet all safety criteria requirements
• Detection level indicator to simplify commissioning
• Various standard confi guration methods by internal switches, by remote and by serial link, to simplify configuration
• Two SPDT output switches to indicate flame presence and proper detector operation
|
|
|
|
|
|
The self-checking RUBY PACKSCAN flame detectors are mainly designed for monitoring gas burners.
They transmit a binary safety signal on the presence or absence of a flame.
The response time to a flame shutdown is less than 1 second, as per Standard EN298 relating to gas safety equipment.
The RUBY PACKSCAN detector uses a detection tube for ultraviolet wavelengths between 185 and 280nm.
An auto-checking mechanism for the tube covers the sight hole three times per second in order to ensure self checking operation.
A display enables visualisation of the configured parameters as well as the level of detection.
30 years in the field of flame detection gives the RUBY PACKSCAN the following advantages :
• an ‘all in one concept’ with an integrated amplifier in the scanner head for easy installation
• two microprocessors for increased safety and reliability
• Approved by APAVE meeting all safety criteria requirements.
• Detection level indicator to simplify commissioning
• Various standard confi guration methods by internal switches, by
remote and serial link to simplify configuration.
• DPDT output switch to indicate flame presence and proper detector operation.
|
|
| ... products without technical information |
| |
|
|
|
|
IT-3100 - The ideal terminal for mobile sales and ticketing solutions
Whether on the bus, the train, in logistics or at an open-air concert, the high-speed thermal printer and optional magnetic card reader as well as the easily readable display make the IT-3100 data terminal ideally suited for use in the field of mobile sales and ticketing. The sturdy terminal takes daily industrial rough and tumble in its stride and also feels at home in dirty and wet environments. The Bluetooth® and IrDA interfaces as well as a PC card and SD card slot offer a range of expansion options, as well as use in a WLAN and GPRS environment.
The highest level of efficiency, perfect ergonomics - anytime, anywhere
Excellent range of connections and interfaces
Sophisticated design and simple operation down to the last detail
Microsoft Windows® CE 5.0
1,2 m drop protection
Splash water and dust protection in accordance with IP54
Top-class readability from the display and keypad
The IT-3100 draws its energy from the power supply (100-240V) and the integrated lithium ion storage battery (7.4V, 2200mAh). Excellent power management enables the lowest possible level of electricity consumption, resulting in longer operating times. A back-up battery is integrated, offering additional security for user data. Future additions to the range of functions can simply be transferred by software into the high-performance terminal. This is made possible by the battery-independent memory.
|
|
VX8
Windows XP Based Vehicle Mount Computer
LXE's VX8 vehicle-mounted computer is a rugged, wirelessly enabled Windows based mobile PC with a 10.4" touch screen display, designed for use in tough environments. Available with either Windows® XP Professional MUI or Windows® XP Embedded, the VX8 has the power and flexibility to run multiple advanced applications. Its compact size and range of vehicle mounting options makes it suitable for use on vehicles where space is limited. Optional integrated Bluetooth®, WLAN and WWAN radio support deliver communications on the move. With a magnesium enclosure rated to IP65, the VX8 has been engineered to handle extreme temperatures, shock, vibration, dust and moisture.
|
|
Voice enabled with ToughTalk™ technology.
Rugged vehicle mount computer with Windows® CE .NET OS - reduces application development & IT support costs.
Fully heated - ideal for freezer/cold weather applications.
Low profile with integrated keyboard improves driver’s field of view.
|
|
|
A small footprint, large functionality and economical price distinguishes the LANpoint 7 Series of vehicle-mount computers. The series offers open architecture for easy implementation and deployment into existing and future IT infrastructures. It is exceptionally rugged, has no moving parts, and is environmentally sealed against dust and water. It has a very wide operating temperature range - use indoors or out. Easy to integrate, use and support, these data collection computers are ideal for data capture and communications solutions for the loading dock, shipping port, rail or truck terminal, warehouse, distribution center, push-cart, shop floor inventory, tool crib management, or other commercial environment.
|
|
|
|
|
|
SuperTrax is the latest AXESS TMC terminal featuring the most advanced data collection technology in a modern and stylish case.
The simple but modern and stylish design, with its friendly and flexible interface, makes SuperTrax the most advanced Time & Attendance terminal on the market at a very competitive price. The built-in standard Time & Attendance application can be easily integrated with other applications, including HR management.
Workflow procedures for processing holiday, authorizations, travel expenses or general inquires regarding balances, among others, can be easily developed in standard languages, such as “.NET” or “HTML”.
Slot readers (magnetic or barcode) are available options that work together with the internal RFID reader where double ID technologies are required.
Biometric modules with optical or capacitive sensors deliver the same unrivaled technology as the terminal itself and can be used in 1:N or 1:1 modes, with up to 9500 templates.
For further information: www.axesstmc.com
|
|
The Future.Pad® 84 T-N is a IP54 /MIL-810F, full rugged handheld mobile tablet computer with 8,4" touch screen in ultra robust mechanical design, featuring Intel® Atom™ Z-processor up to 1.6 GHz, up to 2GB SDRAM and >60GB HDD / >16GB SSD storage.
It provides various features, such as sunlight readable display, GPS, 3.5G HSDPA, 1D barcode reader, RFID, RAM mount, docking station.
The Future.Pad® 84 T-N provides a powerful mobile computing platform with an 8.4 inch TFT color LCD and optional sunlight readable touch screen.
It has built-inWiFi 802.11/b/g/n and Bluetooth to enhance the mobility and smooth data access for various vertical markets. Furthermore, the Future.Pad® 84 T-N has the strictest measurement to protect all your sensitive data by implementing TPM encryption and fingerprint security features. The long lasting battery life can provide an uninterrupted use for 4~8 hours.
|
|
SKU: A1NH.1.BB02.H0
* Intel® Celeron® M ULV 423
* 1.0 GB DDR2 RAM
* 80GB SATA Hard Disk Drive
* Built-in Wireless a/b/g Networking
* Bluetooth® 2.0+EDR
* 12.1" TFT XGA Wide Angle View LCD Touch Screen Display
* Biometric Finger Print Reader
* Microsoft® Windows Vista® Business, Windows® XP Embedded, or openSUSE™ Linux
* Windows Aero Technology Capable
Black units: Back ordered. Ships in 1 - 2 weeks.
White units: In Stock. Usually ships in 24 - 48 hours.
|
|
|
|
|
|
Created for professionals who require a robust, yet highly mobile computing solution, the newly enhanced Sahara Slate PC i440T Touch-iT Tablet PC combines power, convenience and flexibility into a sleek, lightweight, carry-everywhere design.
Picking up where our previous generation of slate style touch screen tablet PCs left off, the new Sahara Slate PC i440T Touch-iT Tablet PC is made for highly demanding vertical markets which place an emphasis on productivity and speed - such as retail, restaurants, casino operations, warehousing, control systems and healthcare.
For more computational touch screen muscle, the Sahara Slate PC i440T fits the bill with its Intel® Core%u2122 2 Duo LV processor. Using the Sahara Slate PC i440T, staff can quickly input and analyze data for maximum productivity.
SKU: TK-440T2-AB-11-SR
* Intel® Centrino® Duo Mobile Technology
* Intel® Core%u2122 2 Duo LV L7400
* 2.0 GB DDR2 5300 SDRAM
* 100GB SATA Hard Disk Drive
* Built-in Wireless a/b/g Networking
* Bluetooth® 2.0+EDR
* 12.1" TFT XGA Wide Angle View LCD Touch Screen Display
* Sunlight Readable Display Standard
* Biometric Finger Print Reader
* Microsoft® Windows Vista® Business, Windows® XP Embedded, or openSUSE Linux
* Vista Aero (Glass) Technology Capable
|
|
VX7 Vehicle Mounted Voice Terminal
- Voice enabled with ToughTalk™ technology.
- Full-screen version of VX6 vehicle mounted computer - perfect for more robust applications.
- Windows® CE .NET OS - so you can easily adopt future emerging technologies & applications.
- With LXE’s RFTerm® multi-session terminal emulator, you can easily run your legacy terminal emulation applications.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
