|
|
The JetCon 3401G, the industrial Gigabit Ethernet media converter, is equipped with a rugged aluminum alloy case with IP-31 grade ingress protection against
damages of solid objects or dust. With the excellent characteristics of heat dissipation, JetCon 3401G is capable to perform better than ordinary Gigabit Ethernet media converters which are enclosure by steel metal with various of heat dissipation holes.
Unlike those with a single power input, the real time redundant power backup on JetCon 3401G leads to the functionality of a real Industrial Gigabit Ethernet Media Converter with the non-stop transmission.
*Converts 10/100/1000TX to Gigabit Fiber
*Flexible SFP Fiber transceiver design
*Auto Fault Detection and Alarm
*Fault Alert for port and power
*Two way Link loss forwarding
*Power redundancy with wide range input
*IP-31 grade protection with wide range operating temperature
*1.5KV Hi-Pot testing passed
|
|
CM-011-ST (CM-ST100L)
100FX(ST, Multi Mode) to 10/100TX, LLF, LFP
CM-011-SC (CM-SC100L)
100FX(SC, Multi Mode) to 10/100TX, LLF, LFP (Agilent)
CM-011-SC60 (CM-SC100L-SC60)
100FX(SC, Single Mode, 60km) to 10/100TX, LLF, LFP
CM-011-SC30 (CM-SC100L-SC30)
100FX(SC, Single Mode, 30km) to 10/100TX, LLF, LFP
CM-A1000L-GB
LLF + LFP, 10/100/1000 Base-Tx to Mini-GBIC Media Converter
|
|
|
IMC-1021FX are industrial media converters provide media conversion between 10/100BaseT(X) and 100BaseFx. IMC-1021FX series are rigid IP-30 housing design and supporting an operating temperature of -10 to 60?C, and an extended operating temperature (T models) of -40 to 70?C. Therefore, the IMC-1021FX are reliable media converters and can satisfy most demand of operating environment.
|
|
The series e-light² EL100U2 are 8 port unmanaged Industrial Ethernet layer 2 switches with auto negotiation and auto MDI/MDIX.
The EL-100U2 series contains unmanaged 7/8 port switches for 10/100MBit/s optionally with up to eight RJ45-Ethernet-ports and up to three optical ports which work with POF, HCS, and multimode or singlemode fiber optics. Additional features are auto negotiation, MDX/MDIX and redundant power supply.
The ruggedness to electrical and magnetic interferences, the potential separation of transmitter and receiver as well as ranges up to 40km between two fiber optic systems are important performance features of the transmission with POF, HCS and multimode or singlemode fiber optics. LEDs and potential free contacts of a differential relay signalize defective states.
Apart from ST and SC as optical connection types, E2000 is also available. All systems feature communication with two fibers or a single fiber by BIDI technology with SC connection.
|
|
DragonLine 4 Slot Modular Chassis Switch (Managed/Ring)
Features:
- 4 slots for 8 ports 10/100TX, 8 port 100FX and Gigabit uplink module
- Port Based VLAN /802 .1Q VLAN
- Confirms to IEEE802.3u 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber
- IEEE802.3x Flow control
- High back-plane bandwidth 8.8Gbps
- I- EEE802.3ad Port trunk with LACP
- Stack management via one IP address, easy management by Web GUI
- Broadcast storm filter
- IGMP support for Multi Media application
- IEEE 802.1p class of service
- Port mirror / Port security
- DHCP client
- Port bandwidth control
- IEEE 802.1d Spanning tree protocol
- Supports GVRP function
- Web/ SNMP / Telnet / CLI management
- Option Module for slot:
- 2 x Gigabit SX module
- Gigabit copper+ Gigabit SX module
- 2 x Gigabit copper module
- 8 ports 10/100TX module
- 8 ports 100FX module
- IEEE 802.1x user authentication
|
|
|
|
|
|
|
Our scope of services regarding electronic systems and communication components for fiber optic technology ranges from RS232, RS422 and RS485 to TTY fiber optic converters. Apart from that, our d-light systems offer solutions for the connection of Profibus, Profibus redundant and Modbus-Plus. Our series e-light and DragonLine consist of both managed and unmanaged Industrial Ethernet switches, partly with PoE (Power over Ethernet) functionality. With DragonLine we cover numerous applications concerning Ethernet and Gigabit-Ethernet. The systems of our io-light series transmit switch, control and analogue signals via fiber optics. Furthermore, we offer optical amplifiers and CAN fiber optic converters. Among that, we also offer compact splice boxes and hybrid splice boxes. POF, HCS and multimode or singlemode fiber optics are unsusceptible to electrical and magnetic interferences. Other performance features are the potential separation of transmitter and receiver and ranges of up to 100 km between two fiber optic systems. Apart from SC and ST as optical connection types, E2000 is also available.
|
|
e-light2M is a 8 port switch that features ring function based on the Pathfinder Ring (P-Ring) with a recovery time of less than 300ms.
e-light2M is available with up to 4 flexibly configurable FX-ports and up to 6TX-ports. The Fast Ethernet switches with their industrial design are useable in a wide temperature range of -30°C to +75°C and are suitable for both DIN rail mounting and wall fastening.
The e-light2M management highlights are amongst others: Web Management GUI, Port Mirroring, DHCP Client, IGMP, SNTP, SMTP, port and tagged based VLAN, SNMP in connection with Web Management and RMON, quality of service as well as an alarm relay output for system events. e-light2M is suitable for POF, HCS, multimode and singlemode and allows ranges of up to 100km.
|
|
KOM300
Industrial Ethernet to Fiber Media Converter
KOM300 is an industrial fiber optic convertor which can work in harsh electromagnetic environment within a wide range of temperature.
- Operating temperature: -40 to 75°C(-40 to 167°F)
- 2×10/100Base-T/TX, RJ45 socket
- 1-core single mode fiber
- Broadcasting storm control
- MAC Address Table Size: 1K, buffer cache: 1M
- IP30 protection class
- DIN-Rail mounting or rack-mounting
- FCC/CE/UL/ROHS
|
|
| ... products without technical information |
| |
|
|
|
|
Aimtec expands its switching regulator converter product line with the addition of the AMSR1-78-NZ series of non-isolated, DC-DC switching regulators.
A feature rich, pin-to-pin replacement of 78xx linear regulators, the AMSR1-78-NZ step-down converters provide highly regulated output voltages ranging from 3.3VDC to 12VDC, producing maximum output currents of 1A at efficiency rates of up to 96% that remain virtually constant over the entire input range. Low output ripple and noise (60mV p-p) make these robust converters ideal for noise sensitive applications.
Ultra wide input ranges (up to 6:1) extend from 4.75-32VDC to 16-33VDC allowing these highly reliable products to be powered from unregulated sources.
Designed in a SIP3 package (11.68 x 8.9 x 17.5mm), the AMSR1-78-NZ series is pin compatible to the TO-220 package and makes these power supplies ideal for low profile circuit implementations such as portable power and standby-power applications.
Versatile for a multitude of industrial applications, the AMSR1-78-NZ series is designed to operate at full output power without heatsinking or forced-air cooling below +85°C, which is a distinct advantage for all applications.
Useful features include continuous short circuit protection, output current limit and thermal shutdown, Aimtec’s AMSR1-78-NZ series of DC-DC switching regulator converters can operate continuously at full load without the need for load derating below +71° C, within an ambient temperature range of -40° to +85°C.
The AMSR1-78-NZ series is made with high quality, RoHS compliant materials that undergo rigorous quality control to ensure reliability and performance.
|
|
For Point of Load (POL) applications, MSK has created the first hermetic, hi-rel switching regulators product line. Offering high efficiency, high output current, wide input voltage range, and output voltages as low as 1.2 Volts, the MSK Switching Regulators product line allows circuit designers to power most of today's complex digital processors, FPGA's, and similar systems.
- Efficiency up to 95%
- Output Current up to 8 Amps
- Input Voltage Range from 5 to 80 Volts
- Fixed Output Voltages from 7 to 1.2 Volts, as adjustable versions.
|
|
Part: IR3624M
Description: High Frequency Synchronous PWM Buck Controller in a 10-Lead MLPD Package.
Features
* Internal 600kHz Oscillator
* Operates with Single 5V or 12V Supply
* Programmable Over Current Protection
* Hiccup Current Limit Using MOSFET RDS(on) sensing
* Precision Reference Voltage (0.6V)
* Programmable Soft-Start
* Pre-Bias Start-up
* Thermal Protection
* 10-Lead MLPD Package
The IR3624 is a PWM controller designed for high performance synchronous Buck DC/DC applications. The IR3624 drives a pair of external N-MOSFETs using a fixed 600kHz switching frequency allowing the use of small external components. The output voltage can be precisely regulated using the internal 0.6V reference voltage for low voltage applications. Protection such as Pre-Bias startup, hiccup current limit and thermal shutdown are provided to give required system level security in the event of fault conditions.
|
|
Si825x
The Si825x family of programmable digital power controllers provides closed-loop feedback control, system protection and power management functions for switch mode power systems and motor control applications.
Features
Single-chip, flash-based digital controller
Dedicated DSP-based loop processor
50 MIPS flash system management processor
Comprehensive, low-cost development kit
5x5 mm 28QFN and 32LQFP packages
125 °C maximum operating temperature
Applications
DC-DC, AC-DC converters
PFC circuits
Motor control systems
Isolation
UPS system
Level shifting
Ground loop elimination
Isolated analog data acquisition
Operator interface controls
Plasma TVs
Ethernet/CAN networks
Isolated point-to-point communications
|
|
| ... products without technical information |
| |
Novafix MR1K-...GM/GK
Mechanical Flow Switch for liquids or gaseous media with spring supported piston and magnetic actuation of a reed switch. Robust design produced in materials brass or stainless steel.
compact dimension
good repeatabilty
dirt-resistance
high switch capability
hermetic separation of mechanical and electrical component
|
|
Novafix HD2K-...GM/GK
Mechanical Flow Switch for liquids media, with spring-supported piston and magnetic triggering of a reed switch. Rugged construction in brass or stainless steel with additional viscosity compensation.
viscosity compensation 30-330mm²/s
good repeatabilty
high switch capability
hermetic separation of mechanical and electrical component
exact setting of switch via scale + gear
|
|
Novafix VD-...GR
Mechanical Flow Switch for liquids or gaseous media, with contactless triggering of an adjustable reed switch.
Rugged design in brass / bronze combination.
good repeatability
dirt-resistant
exact setting of switch via scale
|
|
- Piston type
- Liquids and gas application
- Interchangeable switch head
- Nickel plated Brass or St. Steel
- 1/4" to 1" female thread process connections
- Adjustable reanges from 0,04 to 60 l/min.
- SPDT reed switch 250 Vac - 1,5A
- 200 bar working pressure, 400 bar on request
- Max working temperature 200°C
- Protection class IP65
|
|
| ... products without technical information |
| |
Mainly based on the float switch design, these controllers help to monitor the liquid level (as combined units they monitor both liquid level and temperature) in oil reservoirs of fluid power and lubrication systems.
Attached to the tank top cover, they penetrate directly into the hydraulic fluid or the lubricant.
Each of the following series offers particular features and details culminating in the extreme density of functions offered by the Multiterminal.
Level switch Fluidcontrolterminal series
High number of functions reduces requirements for installation, space and cost
Adjustable level contacts
Connecting flange according to DIN 24 557 part 2
Directly attached electronic contact thermometers optional
The FC terminals offer the functions of tank breathing, level/temperature control, filling and topping up and oil sampling in a very compact design.
|
|
Level measurement instrument in stainless steel 1.4571
with integrated temperature sensor
TN 210
Characteristics:
Analog level signal 4-20 mA, two-wire transmitter
Max. 4 level switches (bistable) pnp-output. Control elements: reed contacts or magnet sensors
Analog temperature signal 4-20 mA, two-wire transmitter
Temperature switches: pnp-output or thermostat for switch action
Advantages:
Reductions of costs: max. 4 different measurements in one measuring instrument
Economy of time, of storage costs, of assembly costs etc.
Areas of application:
IMB combined measuring instruments are suitable even for rough environments and are applicable in the following industries:
plant engineering, off-shore, machine construction, power plants, chemical industrie, ship-building, biochemical industrie, food industrie, petrochemical industrie, pharmaceutics etc.
|
|
Mainly based on the float switch design, these controllers help to monitor the liquid level (as combined units they monitor both liquid level and temperature) in oil reservoirs of fluid power and lubrication systems.
Attached to the tank top cover, they penetrate directly into the hydraulic fluid or the lubricant.
Each of the following series offers particular features and details culminating in the extreme density of functions offered by the Multiterminal.
Level switch Fluidcontrolterminal series
High number of functions reduces requirements for installation, space and cost
Adjustable level contacts
Connecting flange according to DIN 24 557 part 2
Directly attached electronic contact thermometers optional
The FC terminals offer the functions of tank breathing, level/temperature control, filling and topping up and oil sampling in a very compact design.
|
|
Level measurement instrument in stainless steel 1.4571
with integrated temperature sensor
TN 210
Characteristics:
Analog level signal 4-20 mA, two-wire transmitter
Max. 4 level switches (bistable) pnp-output. Control elements: reed contacts or magnet sensors
Analog temperature signal 4-20 mA, two-wire transmitter
Temperature switches: pnp-output or thermostat for switch action
Advantages:
Reductions of costs: max. 4 different measurements in one measuring instrument
Economy of time, of storage costs, of assembly costs etc.
Areas of application:
IMB combined measuring instruments are suitable even for rough environments and are applicable in the following industries:
plant engineering, off-shore, machine construction, power plants, chemical industrie, ship-building, biochemical industrie, food industrie, petrochemical industrie, pharmaceutics etc.
|
|
Features/Benefits:
- DC to 18GHz
- Low Insertion Loss
- High Insertion Loss Repeatability
- Excellent Isolatioin
- Extremely Low Passive Intermodulation
Description:
The CCR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The switches are small with connector spacing compatible with SMA connectors.
The CCR-33 series switch is offered with either a failsafe or latching actuator. This design is compatible with the two most common mounting hole patterns. The CCR-33 series switch is interchangeable with a variety of
switches.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
