|
|
Korenix JetCon1301 is a compact sized and rugged industrial fast Ethernet media converter with one 10/100M Fast Ethernet copper & one 10/100M single-mode or multimode fiber port. The power input range is either 18~27VAC or 18~32VDC. JetCon 1301 supports wide operating temperature from -10 to 70.
The JetCon1301 is world's first fiber Ethernet converter with pure converter mode design. Pure converter mode design guarantees the packet will never be lost with extreme short data forwarding latency. The pure converter mode design just forwards the signal to link partner without packet checking which is suitable for proprietary communication protocol such as EtherCAT.
|
|
RuggedMC RMC
Ethernet Media Converter (Copper to Fiber)
Universal Power Supply Options :
- 24VDC, 48VDC or HI (88-300VDC / 85 - 264VAC) options
for worldwide operability
- Integrated high-reliability power supply eliminates the need
for external power transformer
- Screw down terminal blocks ensure reliable maintenancefree
connections
- All power supplies CSA/UL 60950 approved for
+85C (+185F) operation
- Meets NEMA TS 2 (1998) Environmental Requirements
for traffic control equipment.
Designed for Harsh Environments
- Exceeds IEC 61850-3 and IEEE 1613 Standards for
communication equipment in electric power substations.
- Operates over a temperature range of -40C to +85C
without the use of fans for improved reliability
- 21 AWG galvanized steel enclosure suitable for DIN or
panel mounting provide secure mechanical reliability
|
|
DragonLine 4 Slot Modular Chassis Switch (Managed/Ring)
Features:
- 4 slots for 8 ports 10/100TX, 8 port 100FX and Gigabit uplink module
- Port Based VLAN /802 .1Q VLAN
- Confirms to IEEE802.3u 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber
- IEEE802.3x Flow control
- High back-plane bandwidth 8.8Gbps
- I- EEE802.3ad Port trunk with LACP
- Stack management via one IP address, easy management by Web GUI
- Broadcast storm filter
- IGMP support for Multi Media application
- IEEE 802.1p class of service
- Port mirror / Port security
- DHCP client
- Port bandwidth control
- IEEE 802.1d Spanning tree protocol
- Supports GVRP function
- Web/ SNMP / Telnet / CLI management
- Option Module for slot:
- 2 x Gigabit SX module
- Gigabit copper+ Gigabit SX module
- 2 x Gigabit copper module
- 8 ports 10/100TX module
- 8 ports 100FX module
- IEEE 802.1x user authentication
|
|
DragonLine 24 port Gigabit (PoE/Managed/2 SFP)
Features:
- 24 10/100 plus 2 MINI GBIC /RJ-45 combo switch with 24 PoE injector and build in 200W AC power
- Confirms to IEEE802.3 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber, 802.3af Power over Ethernet
- High back-plane bandwidth 8.8Gbps
- Rapid spanning tree IEEE802.1w
- IGMP snooping and IGMP Query mode for Multi-media application
- Port mirror and bandwidth control
- Supports GVRP function
- End point insert mode remote power feeding
- Provides extra DC 48V input with redundant function and management power status through RS-232 port
- Management by Web/SNMP/Telnet/Console
- System event log support
- Port Based VLAN /802 .1Q Tag VLAN
- IEEE802.3x Flow control
- Flow control for full duplex
- Back pressure for half duplex
- IEEE802.3ad Port trunk with LACP
- Spanning tree protocol IEEE 802.1d
- IEEE 802.1p class of service
- IEEE 802.1x user authentication
- TACACS+ (option)
- Broadcast storm filter
- DHCP client
- On line extra power supply testing through RS-232 port
- Support command line interface management
- Support SNTP
|
|
Common Key Feature
*Digital Input with DI and Event Counter Mode
*Digital Output with DO and Pulse Output Mode
*Multi-form Peer to Peer communication between JetCon 6330 and JetCon 6350
*Smart logic rules
*Industrial Modbus/TCP protocol
*Windows Utility and Web Display
*Built-in watchdog protects against system failure
*Safe mode operation for network link lost
*Din-Rail mount with robust aluminum case and IP31 protection
The JetCon 6300 series converts I/O signal to Ethernet messages and is equipped with one Ethernet port and multiple channels of Digital Input or mixed multiple channels of Digital Input and Output.
The JetCon 6300 series provides digital input, event counter modes, digital output and pulse output modes. The flexible local logic rules and the Peer to Peer function can support users to configure point to point, point to multiple point or multiple to one operation.
The JetCon 6300 series provides a Windows Utility, Web configuration and Industrial Modbus/TCP protocol for integration. JetCon 6300 is with existed HMI/SCADA. Also, the robust aluminum case has good heat dispersion and IP31 protection. With the JetCon 6300, users can easily perform status monitoring and control the remote I/O devices.
|
|
The JetCon 3401G, the industrial Gigabit Ethernet media converter, is equipped with a rugged aluminum alloy case with IP-31 grade ingress protection against
damages of solid objects or dust. With the excellent characteristics of heat dissipation, JetCon 3401G is capable to perform better than ordinary Gigabit Ethernet media converters which are enclosure by steel metal with various of heat dissipation holes.
Unlike those with a single power input, the real time redundant power backup on JetCon 3401G leads to the functionality of a real Industrial Gigabit Ethernet Media Converter with the non-stop transmission.
*Converts 10/100/1000TX to Gigabit Fiber
*Flexible SFP Fiber transceiver design
*Auto Fault Detection and Alarm
*Fault Alert for port and power
*Two way Link loss forwarding
*Power redundancy with wide range input
*IP-31 grade protection with wide range operating temperature
*1.5KV Hi-Pot testing passed
|
|
EL-100U2
(7/8-Port Switch unmanaged, extended temperature range)
e-light2 series EL100U2 are 8 Port Unmanaged Industrial Ethernet Layer 2
Switches with Auto-Negotiation and Auto MDI/MDIX.
Features are:
Fast Ethernet Switches containing up to 3 FX-Ports and 8 TX-Ports
FX-Ports with lexible coniguration
Wide voltage range 9 - 60 VDC
Temperature range: -20C up to +60C
Rugged and compact housing
Industrial design useable for DIN-RAIL or wall mounting
|
|
EL-100X (4-Port Switch unmanaged, extended temperature range)
e-light series e-Light 100 and e-Light 100X are 4 Port Unmanaged Industrial Ethernet Layer 2 Switches. The e-Light 100X offers furthermore an extended temperature range and a redundant power supply.
e-light series e-Light 100S1 and e-Light 100E1 are 8 Port Unmanaged Industrial Layer 2 Ethernet with limited management, fulfils the toughest industrial environmental requirements. High MTBF numbers make the EL100E1 the first choice for applications where temperature, vibration and insulation are critical parameters.
e-light series e-Light 100S3 and e-Light 100E3 are 8 Port Managed Industrial Ethernet Layer 2 Switches for Single Ring Topologies which fulfils the toughest industrial environmental requirements. A special concept allows the ultra fast re-configuration (30ms) of the network topology. This concept also eliminates failures caused by network links and/or switches. Management of the e-light e-Light 100S3 and e-Light 100E3 switches is easy and is done by the user in the Windows based IP configuration tool. The tool is free and any of the Ethernet ports can be used for this purpose. Thus, no serial port is required for setting the configuration parameter on the e-light 100S3 and e-Light 100E3 switch. Excellent real time properties are offered through both layer 2 and layer 3 priority support with four priority queues and the switch is incorporated with a fault contact in order to indicate any switch failures. SNMP (Simple Network Management Protocol) can be used for collecting and maintaining information about the local environment and network.
|
|
DragonLine 4x10/100TX + 1x100FX Industrial Ethernet Switch
Technical data
RJ-45 port support Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
Back-plane (Switching Fabric): 1 Gbps
1K MAC Address Table
512Kbits Memory Buffer
IP-30 Protection
DIN Rail and Wall Mount Design
Wide-range Redundant Power Design
Power Polarity Reverse Protect
Overload Current Re-settable Fuse Present
IEEE 802.3x flow control support
|
|
JetCon2401 is a Multi-serial to fiber media converter which adopts RS-232/RS-422/RS-485 triple mode circuits with auto baud rate and direction control. It extends the serial signal link distance to 5KM (JetCon2401-m Multi-mode Optical Fiber) or 40KM (JetCon2401-s Single-mode Optical Fiber) and also provides good immunity of EMI/EMS.
To ensure nonstop transmission in hazardous environment, JetCon2401 supports wide operating temperature range, -20~70 model (JetCon2401).
Further more, JetCon2401 supports wide range power input (DC/AC) and DIN rail mount for quick and easy installation.
|
|
Industrial Media Converters from Phoenix Contact are designed to be suitable for harsh industrial applications enhancing the overall reliability of your system.
DIN rail mountable media converters can isolate, extend and protect your data signals for use within hazardous areas (Class I, Div 2).
|
|
RuggedMC RMC20
Serial Media Converter (Copper to Fiber)
Port Options :
Protocol independent RS485, RS422, or RS232
(user selectable) conversion to multimode fiber optics
(ST connector only)
RS232 to RS485/422 conversion mode
Fully EIA/TIA RS485, RS422, RS232 compliant communications
Built-in, defeatable, RS485/RS422 termination networks
Point-to-point, or optical loop configurations
Full or half duplex configurable
Support for high-speed serial baud rates from
300 to 115200 baud
Key Features :
Protocol independent (use for Modbus, DeviceNET, Profibus, DNP 3.0, proprietary, etc)
Extend lengths of serial connections (up to 5km/hop)
Media conversation is transparent to end devices
|
|
The optical networking features a safe datatransmission and is suited for example to transmit PROFIBUS, MODBUS-PLUS and many other manufacturer specific systems. These innovative systems can be realisedin bus-, star- or tree-structures as well as electric-optic mixed structures. Beyond this the systems are also able to transmit RS 232, TTY- or RS 422-Protokolls.
The systems of the d-Light series are mainly suitable for applications with high safetytechnical requirements for example in the climatic und air ventilation application used in tunnel ventilations or in the railwaytechnics.
As an important performance of the Transmission with POF, HCS, multimode or singlemode fiber optics obtains the ruggedness to electrical and magnetical interferences, the potential separation of transmitter and receiver as well as ranges to 40km between 2 fiber optic systems.
Trough the continuos expansion of our productportfolio the fiber optic centre of eks provides not only standard components and customer specific solutions. We allthough offer the fiber optic cabels and the packaging. The competent planningsupport of the eks fiber optic team from the project beginning until the realisation tops our Quotation - fiber optic from one hand - of our expanding company off.
|
|
CAN 300
The CAN 300 module from the Systeme Helmholz GmbH for use in a S7-3001) from Siemens permits connection of CAN stations with the programmable controller. The module can be slotted either into the central controller or into the expansion unit.
The CAN 300 modules support both CAN 2.0A (11 bit) and CAN 2.0B (29 bit) frames with a free selectable baudrate of 10 Kbit/s to 1 Mbit/s.
The CAN 300 module can also be run as Layer 2, CANopen Master, CANopen Slave and with Lenze System bus.
The CAN 300 module contains the power management functions Power On, Stop -> Run and Run-> Stop. IDs relevant to the programmable controller can be prefiltered using a 5-level acceptance mask.
In CAN 300 modules, 11 free settable timers are available. Each timer can trigger a free programmable CAN frame. In that way, it is simple to implement synchronous protocols commonly used in drive and servo control using the CAN 300 module.
CAN 400
The CAN 400 module from Systeme Helmholz GmbH for use in a S7-4001) from Siemens, permits connection of CAN stations with a programmable controller. The module can be slotted either into the central controller or into the expansion unit.
The CAN 400 modules support both CAN 2.0A (11 bits) and CAN 2.0B (29 bits) frames with a free selectable baudrate of 10Kbit/s to 1Mbit/s, or free editable bit timing.
The CAN 400 module can also be run as Layer 2, CANopen Maste and CANopen Slave.
LENZE Systembus in development.
The CAN 400 module contains the scripts "Power On", "Stop -> Run", "Run-> Stop", Power Off. Ids relevant to the programmable controller can be prefiltered using a 5-level acceptance mask.
In CAN 400 modules, 16 free settable timers up to a resolution of 1 ms are available.
Each of them can trigger a free programmable CAN frame. In that way, it is simple to implement synchronous protocols commonly used in drive and servo control using the CAN 400 module.
1) S7 400 is a registered trademark of Siemens AG
|
|
EL-100S3 (8-Port Switch managed)
e-light series EL100 and EL100X are 4 Port Unmanaged Industrial Ethernet Layer 2 Switches. The EL100X offers furthermore an extended temperature range and a redundant power supply.
e-light series EL100S1 and EL100E1 are 8 Port Unmanaged Industrial Layer 2 Ethernet with limited management, fulfils the toughest industrial environmental requirements. High MTBF numbers make the EL100E1 the first choice for applications where temperature, vibration and insulation are critical parameters.
e-light series EL100S3 and EL100E3 are 8 Port Managed Industrial Ethernet Layer 2 Switches for Single Ring Topologies which fulfils the toughest industrial environmental requirements. A special concept allows the ultra fast re-configuration (30ms) of the network topology. This concept also eliminates failures caused by network links and/or switches. Management of the e-light EL100S3 and EL100E3 switches is easy and is done by the user in the Windows based IP configuration tool. The tool is free and any of the Ethernet ports can be used for this purpose. Thus, no serial port is required for setting the configuration parameter on the e-light EL100S3 and EL100E3 switch. Excellent real time properties are offered through both layer 2 and layer 3 priority support with four priority queues and the switch is incorporated with a fault contact in order to indicate any switch failures. SNMP (Simple Network Management Protocol) can be used for collecting and maintaining information about the local environment and network.
|
|
Direct communication with S5 and much more!
The Data Station Plus is a multiple protocol converter, a system data logger, and a web interface for industrial applications.
With two RS-232 and one RS-422/485 communications ports, as well as a 10 Base-T/100 Base-TX Ethernet port, the Data Station can connect to various devices simultaneously. With downloadable communications drivers, the Data Station can communicate to virtually any serial or Ethernet device in its own native language, and transfer that data to and from any other connected device. Integrating devices with mismatched protocols can now be done with the click of a mouse!
The data logging facility allows variables to be collected and stored along with a time and date stamp for later review of the process. Files are stored on CompactFlash in IT ready format, allowing programs such as Microsoft Excel to access them.
The "virtual HMI" facility provides a means to view and control a process from any networked PC, using only a standard web browser. The new VGA resolution provides SCADA like display capability at no extra cost. The port sharing facility allows serially connected devices to be reprogrammed remotely.
SOME FEATURES:
- Protocol Conversion Feature Converts Numerous Protocols Simultaneously
- CompactFlash Slot Allows Process Data to be Logged Directly to CSV Files (DSPSX & DSPGT)
- Virtual HMI Offers Built-in PC-based SCADA Functionality (DSPSX & DSPGT)
- Webserver Provides Worldwide Access To Data Logs And Virtual HMI (DSPSX & DSPGT)
- Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems
- Alarm Notifications can be sent via Email or Text Messages (DSPSX & DSPGT)
|
|
Order Code K107B:
- Power supply: 19,2..30 Vdc
- Serial port 1: RS232B
- Serial port 2: RS485 Half Duplex
- Isolation: 1,5 kV (50 Hz, 1 min)
- Automatic handshake
- Speed rate 1.200..115.200 bps
- Dimensions (w x h x d): 93,1x102,5x6,2 mm
|
|
Order Code K107USB:
- For Windows 98, 2000 and XP
- Compliance USB standard 1.1 e 2.0
- USB / RS485 isolation: 1500 V
- Max consumption: 60 mA
- Power on PC USB port
- Dimensions (w x h x d): 93,1x102,5x6,2 mm
|
|
|
For the cost-conscious and nevertheless extremely flexible realization of most diverse network topologies over LWL systems RPC angel presents a constant series at standard Switchen among other things with (PoE) power Over Ethernet functionality for a very extensive application spectrum. Dragee-on-line is its own portfolio of Ethernet and Industrial Ethernet solutions. The offer covers both Switche in 19 "- technology and for the DIN rail assembly, with which very flexibly individual space-saving applications in switchgear cabinets or switchboxes can be developed. For the cost-conscious and nevertheless extremely flexible realization of most diverse network topologies over LWL systems RPC angel presents a constant series at standard Switchen among other things with (PoE) power Over Ethernet functionality for a very extensive application spectrum. Dragee-on-line is its own portfolio of Ethernet and Industrial Ethernet solutions. The offer covers both Switche in 19 "- technology and for the DIN rail assembly, with which very flexibly individual space-saving applications in switchgear cabinets or switchboxes can be developed. Some systems of the dragee on-line family, among other things the 19 "dragee-on-line 24 haven Gigabit Ethernet SWITCH or the Gigabit Industrial Ethernet SWITCH dragee-on-line (8x10/100TX + 2x10/100/1000FX) are equipped with PoE functionality. Furthermore the series of systems integrates like the dragee-on-line medium converter 10/100/1000 base TX ton of 1000Base-SX/LX or the dragee-on-line Industrial Ethernet SWITCH 6x10/100/1000TX + 2x10/100/1000/Mini-GBIC for the conversion of Gigabit Ethernet on glass fiber.
|
|
102PC-SE Serial to Ethernet Protocol Converter
Serial to Ethernet Protocol Converter
One Male DB9 Serial Port w/DCE device
One RJ-45 10/100BaseTX Copper Port
Compact Size, Smaller Footprint
Provides Remote Monitoring, Control and Configuration of any Serial Device
Full SNMP and Web Browsing Management
256 Frame Buffer for Ethernet Bridging
Hardened ESD Protection Diodes on RJ-45 Port
Surge Protection Diodes on Power Inputs
Redundant Power Inputs (10-30VDC)
Extended Environmental Specifications
- 0 to 70C Operating Temperature
- >2M Hours Measured MTBF
LED Link/Activity Status Indication
Rugged Industrial DIN-Rail Enclosure with Optional Panel mount kit
|
|
|
The EM1500 Serial-Ethernet Bridge is a device that converts multi-point serial communications to a TCP/IP network. The EM1500 connects to and network enables as many as 4 RS-232 serial devices simultaneously, while also acting as master on a multi-drop RS-485 network. In addition, the EM1500 provides an SPDT relay, 2 digital open collector outputs and 3 digital inputs suitable for interfacing to mechanical switches or logic level circuits.
|
|
Combine a 100Mb Fibre Media Converter and a 2-port 10/100 copper Switch. Add in fibre port choices for all multi-mode and single-mode fibre connector types plus AC or DC input power selection and multiple application environments, and you have a new flexible edge-of-the-network Ethernet product: the CS14 Converter Switch. The compact package is ideal for network edge installations, and is able to be conveniently mounted to suit any application.
The CS14 regular-package units are for office and indoor wiring closet environments. The ambient temperature rating is 0C to 40C. A robust metal case with convection cooling is featured. Metal mouting clips are included, and rack-mounted tray options are available.
The CS14H hardened units are for factory floor applications. The ambient temperature rating is for industrial use. No internal air flow is required for cooling, so it resists dust, dirt, moisture, smoke and insects. Mounting option include stand-alone panel-mounting, DIN-Rail, or rack-mount tray.
The CS14P Premium-rated units are for temperature uncontrolled sheltered applications. Mounting options include stand-alone panel-mounting, DIN-Rail, or rack-mount tray.
Please visit our website for the full product information.
|
|
For any user who needs a 10Mb fibre link connected to one ot two 10/100 copper devices, the "go anywhere" CSN14 Converter Switch is a versatile and handy solution.
The CSN14 family of Converter Switches, with a 10Mb Fibre port built-in covers the full range of application environments with regular (office), hardened (factory floor), and Premium-rated (outdoor) versions.
The CSN14 regular-package units are for office and indoor wiring closet environments. An external AC power supply for either North America (-d, 115vac 60Hz) or international (-i, 230vac, 50Hz) is included. The ambient temperature rating is 0 to 40C. It is convection cooled. Metal mounting clips are included, and rack-mount tray options are available.
The CSN14 Hardened units are for factory floor applications. It resists dust, sirt, moisture, smoke and insects. Mounting options include stand-alone panel mounting, DIN-rail, or rack-mount tray.
The CSN14 Premium-rated units are for temperature uncontrolled applications. In addition to a Premium-rated AC power option and jack, terminals for internal DC power choices at 8 to 15V, 24V or -48V DC are included. Mounting options include stand-alone panel-mounting, DIN-rail, or rack-mount tray.
Please visit our website for full product specifications.
|
|
APPLICATIONS
- Data transmission in a noisy environment
- Interface Insulation
- Remote equipment
- Interface adaptation
CONNECTIONS
RS232 :
- connector SUB D 9 pin femelle,
- connector block 3 pts TD, RD, 0V,
- Connector OF : SMA (ST in option),
- Power supply : connector block (2,5 mm2
AWG 12 max, length stripping = 8 mm)
RS232 INTERFACE
- Transmitted signals : transmit data and
receive data (TD, RD)
- Connection SUB-D 9 pin idem PC
- RTS looped to CTS and polarized to +V
- DSR looped to DTR and polarized to +V
- Signal DCD polarized to +V
- RS232 connection length : 15 to 20 m max
|
|
The new versions of NETLink PRO and the S7/S5 OPC Server, as well as Softings new S5-PCLink, have expanded the suite of Softing products for convenient, powerful and economical access to data in SIMATIC S7 and S5 controllers. NETLink PRO, which was recently recognized as one of the top developments of 2006, is a robust S7 adapter available in Ethernet and USB versions. In hundreds of installations worldwide, it has proven itself to be an economical alternative to the communications processors from Siemens and other manufacturers. The new Version 1.3 is up to 20% faster than its predecessor, and it supports up to 12 MPI/PROFIBUS connections at once. With a single NETLink PRO, you can easily access up to twelve S7 controllers using Siemens STEP7, WinCC, ProTool or the Softing S7/S5 OPC server. The Ethernet version, known as NETLink PRO/ETH, now also supports the RFC 1006 protocol (ISO-on-TCP).
Alongside the adapters for S7 systems, Softing's new S5-PCLink enables economical access to S5 controllers via Ethernet, STEP5 or the Softing S7/S5 OPC server.
STEP, WinCC, ProTool and SIMATIC are registered trademarks of Siemens AG.
|
|
An isolated RS-232 to RS-422/485 converter designed for users who need an industrial grade interface conversion product to extend RS-232 transmission distance and increase networking capability. Its superior industrial application design, which includes DIN-rail mounting, terminal block wiring, external terminal block power, and optical isolation for system protection, makes TCC-100/100I suitable for use in critical industrial environments.
Simply put, your RS-232 devices can be used as part of an industrial RS-422/485 network, but without any hardware or software changes.
RS-232 to RS-422 conversion with RTS/CTS support
RS-232 to 2/4-wire RS-485 conversion
2 KV Isolation Protection (TCC-100I)
Wall and DIN-Rail mountable
Plug-in screw terminal block for easy RS-422/485 wiring
PWR, Tx, Rx LEDs
Surge protection, 16 KV ESD
Operating temperature from -20 to 60℃
|
|
|
