|
|
The JetCon 3401G, the industrial Gigabit Ethernet media converter, is equipped with a rugged aluminum alloy case with IP-31 grade ingress protection against
damages of solid objects or dust. With the excellent characteristics of heat dissipation, JetCon 3401G is capable to perform better than ordinary Gigabit Ethernet media converters which are enclosure by steel metal with various of heat dissipation holes.
Unlike those with a single power input, the real time redundant power backup on JetCon 3401G leads to the functionality of a real Industrial Gigabit Ethernet Media Converter with the non-stop transmission.
*Converts 10/100/1000TX to Gigabit Fiber
*Flexible SFP Fiber transceiver design
*Auto Fault Detection and Alarm
*Fault Alert for port and power
*Two way Link loss forwarding
*Power redundancy with wide range input
*IP-31 grade protection with wide range operating temperature
*1.5KV Hi-Pot testing passed
|
|
CM-011-ST (CM-ST100L)
100FX(ST, Multi Mode) to 10/100TX, LLF, LFP
CM-011-SC (CM-SC100L)
100FX(SC, Multi Mode) to 10/100TX, LLF, LFP (Agilent)
CM-011-SC60 (CM-SC100L-SC60)
100FX(SC, Single Mode, 60km) to 10/100TX, LLF, LFP
CM-011-SC30 (CM-SC100L-SC30)
100FX(SC, Single Mode, 30km) to 10/100TX, LLF, LFP
CM-A1000L-GB
LLF + LFP, 10/100/1000 Base-Tx to Mini-GBIC Media Converter
|
|
|
IMC-1021FX are industrial media converters provide media conversion between 10/100BaseT(X) and 100BaseFx. IMC-1021FX series are rigid IP-30 housing design and supporting an operating temperature of -10 to 60?C, and an extended operating temperature (T models) of -40 to 70?C. Therefore, the IMC-1021FX are reliable media converters and can satisfy most demand of operating environment.
|
|
|
|
|
|
|
Our scope of services regarding electronic systems and communication components for fiber optic technology ranges from RS232, RS422 and RS485 to TTY fiber optic converters. Apart from that, our d-light systems offer solutions for the connection of Profibus, Profibus redundant and Modbus-Plus. Our series e-light and DragonLine consist of both managed and unmanaged Industrial Ethernet switches, partly with PoE (Power over Ethernet) functionality. With DragonLine we cover numerous applications concerning Ethernet and Gigabit-Ethernet. The systems of our io-light series transmit switch, control and analogue signals via fiber optics. Furthermore, we offer optical amplifiers and CAN fiber optic converters. Among that, we also offer compact splice boxes and hybrid splice boxes. POF, HCS and multimode or singlemode fiber optics are unsusceptible to electrical and magnetic interferences. Other performance features are the potential separation of transmitter and receiver and ranges of up to 100 km between two fiber optic systems. Apart from SC and ST as optical connection types, E2000 is also available.
|
|
DragonLine 4 Slot Modular Chassis Switch (Managed/Ring)
Features:
- 4 slots for 8 ports 10/100TX, 8 port 100FX and Gigabit uplink module
- Port Based VLAN /802 .1Q VLAN
- Confirms to IEEE802.3u 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber
- IEEE802.3x Flow control
- High back-plane bandwidth 8.8Gbps
- I- EEE802.3ad Port trunk with LACP
- Stack management via one IP address, easy management by Web GUI
- Broadcast storm filter
- IGMP support for Multi Media application
- IEEE 802.1p class of service
- Port mirror / Port security
- DHCP client
- Port bandwidth control
- IEEE 802.1d Spanning tree protocol
- Supports GVRP function
- Web/ SNMP / Telnet / CLI management
- Option Module for slot:
- 2 x Gigabit SX module
- Gigabit copper+ Gigabit SX module
- 2 x Gigabit copper module
- 8 ports 10/100TX module
- 8 ports 100FX module
- IEEE 802.1x user authentication
|
|
The series e-light² EL100U2 are 8 port unmanaged Industrial Ethernet layer 2 switches with auto negotiation and auto MDI/MDIX.
The EL-100U2 series contains unmanaged 7/8 port switches for 10/100MBit/s optionally with up to eight RJ45-Ethernet-ports and up to three optical ports which work with POF, HCS, and multimode or singlemode fiber optics. Additional features are auto negotiation, MDX/MDIX and redundant power supply.
The ruggedness to electrical and magnetic interferences, the potential separation of transmitter and receiver as well as ranges up to 40km between two fiber optic systems are important performance features of the transmission with POF, HCS and multimode or singlemode fiber optics. LEDs and potential free contacts of a differential relay signalize defective states.
Apart from ST and SC as optical connection types, E2000 is also available. All systems feature communication with two fibers or a single fiber by BIDI technology with SC connection.
|
|
e-light2M is a 8 port switch that features ring function based on the Pathfinder Ring (P-Ring) with a recovery time of less than 300ms.
e-light2M is available with up to 4 flexibly configurable FX-ports and up to 6TX-ports. The Fast Ethernet switches with their industrial design are useable in a wide temperature range of -30°C to +75°C and are suitable for both DIN rail mounting and wall fastening.
The e-light2M management highlights are amongst others: Web Management GUI, Port Mirroring, DHCP Client, IGMP, SNTP, SMTP, port and tagged based VLAN, SNMP in connection with Web Management and RMON, quality of service as well as an alarm relay output for system events. e-light2M is suitable for POF, HCS, multimode and singlemode and allows ranges of up to 100km.
|
|
KOM300
Industrial Ethernet to Fiber Media Converter
KOM300 is an industrial fiber optic convertor which can work in harsh electromagnetic environment within a wide range of temperature.
- Operating temperature: -40 to 75°C(-40 to 167°F)
- 2×10/100Base-T/TX, RJ45 socket
- 1-core single mode fiber
- Broadcasting storm control
- MAC Address Table Size: 1K, buffer cache: 1M
- IP30 protection class
- DIN-Rail mounting or rack-mounting
- FCC/CE/UL/ROHS
|
|
| ... products without technical information |
| |
The SS-110 Slow Speed Switch is a complete system that has one adjustable set point for monitoring a single rotating shaft.
This Speed Switch is used in slow speed applications, and allows accurate underspeed detection within the 1/100-10 rpm range. The SS-110 System is an efficient way to continuously track proper machine RPM, and provide a relay output upon detection of an unwanted change in speed or stoppage of the monitored shaft.
Features:
- Dial-In Calibration Does Not Require Power
- Set Point Ranges: .01 - 0.99 and 0.1 - 9.9 rpm
- ETL Approved to UL 508 Standard
- Completely Field Adjustable
- Fail-Safe Operation in Underspeed Mode
- DIN Rail or Stand Alone Mounting
- Additional DIN Rail Available - Consult Factory
|
|
|
Speed responsive switches detect motion, or sense over-speed or under-speed occurrences of industrial machinery or motors. Hubbell Industrial Controls, Inc. has both direct coupled or non-contact type switches for; directional, non-directional, plugging, anti-plugging, over-speed, under-speed, and also zero-speed applications. Many enclosure styles are available including surface or flange mounting with NEMA 3, 4, 7, 9, 10 or 13 construction.
|
|
|
|
|
|
The combination of a coder with ends of the road in the same case increases the reliability and the safety of the machines, because of two independent checking circuits in the same case.
The coder integrated provided information uninterrupted of the movement in 5-30 VDC with a resolution from 100 to 5000 increments. The programmable ends of the road, the catch of origin are regulated freely with the position wished.
The adjustment of the ends of the road is very simple: the case is assembled on the machine, the machine is then led manually to its limiting position, the end of the road is positioned with a key of programming. This procedure is repeated for the other end of the road.
The case is well protects by its cap against dust or any external intervention; all the signals are cabled on a connector with the back of the case.
These cases can also be provided with potentiometers.
COMP' AUT will be able to best advise the customer in the choice of the case being appropriate for its application.
|
|
| ... products without technical information |
| |
These PCB series of acceleration or shock sensors are intended for applications where acceleration, velocity or impact need to be sensed. Many commercial applications exist (automotive, motorbikes, test equipment,…)
Their size is very small enabling them to be mounted practically everywhere. High reliability, robustness and no power needed for activation, are their major advantages.
These acceleration and shock switches are available from 1 to 15 g-level .
|
|
ASLS-2
Contact Form/Style: Normally Open
Switching Voltage: 24Vdc Max.
Switching Current: 0.25A Max.
Switching Capacity: 5VA Max.
Activation Level: 2-4.9G
Contact Resistance: 10 Ohms Max.
Size: Over All Length: 0.709in (18.0mm)
Diameter: 0.181in (4.6mm)
Electrode Diameter: 0.020in (0.50mm)
Electrode Spacing: 0.114in (2.92mm)
Acceleration and Shock Switch
|
|
The 20.SS is an electromechanical device designed to protect equipment from damaging shock or vibration. The sensitive mechanism detects excessive shock and shutdown the equipment before further damage occurs.
20SS shockswitches are housed in an ATEX certified enclosure and can be used for applications requiring an execution of EEx-d-IIC-T6.
|
|
Features/Benefits:
- DC to 18GHz
- Low Insertion Loss
- High Insertion Loss Repeatability
- Excellent Isolatioin
- Extremely Low Passive Intermodulation
Description:
The CCR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The switches are small with connector spacing compatible with SMA connectors.
The CCR-33 series switch is offered with either a failsafe or latching actuator. This design is compatible with the two most common mounting hole patterns. The CCR-33 series switch is interchangeable with a variety of
switches.
|
|
| ... products without technical information |
| |
Compatible with both SLC and MLC NAND that have the latest
4-kbyte/page structures A single chip supports both SLC and MLC NAND. Controls up to 16GB with SLC NAND; up to 32GB with MLC NAND. Confirmed
compatibility with Flash Memories of several manufacturers.∗1Supports UltraDMA Mode2. Realizes 23MByte/s(equivalent to 150 times speed) in burst writing and 24MByte/s(equivalent to 160 times speed)∗2 in reading by the host
|
|
| ... products without technical information |
| |
RKVM-1708
17" TFT LCD 1U Rackmount KVM Switch 8 Ports
Features:
17" TFT LCD 1280 x 1024
Built-in A/D Board
Support 8 Ports KVM Switch
Membrane keyboard in 104 keys, with touch pad
Auto scan mode for monitoring PCs
Built-in rail self-locking device
RoHS ComplianceR=
|
|
RKVM-1708
17" TFT LCD 1U Rackmount KVM Switch 8 Ports
Features:
17" TFT LCD 1280 x 1024
Built-in A/D Board
Support 8 Ports KVM Switch
Membrane keyboard in 104 keys, with touch pad
Auto scan mode for monitoring PCs
Built-in rail self-locking device
RoHS ComplianceR=
|
|
Designed for PCB mounting.
Short-travel keyswitches, with distinct key click for use under an overlay and/or under RK 90 keycaps. Full-travel keyswitches for designing keyboards with keycaps.
RACON 8 / 12 short-travel keyswitches
RF 15 / 19 short-travel keyswitches
KN 19 short-travel main switch (250 V/4 A)
RK 90 system keycaps
RG 85 III short-travel system (vandal-proof)
RS 76 full-travel keyswitches
Keylock switch for PCB mounting
|
|
SecureLinx SpiderDuo™
Compact Remote-KVM with Local Access
* Reduce costs and decrease downtime by remotely managing PCs and servers, down to the BIOS level, while still allowing transparent local access
* Transfer files, install patches, perform upgrades remotely with Virtual Media
* Remotely manage power with the optional power control unit
* Easy configuration and installation with color coded connectors—local and remote management are up and running in minutes
* VIP Access™ enabled—Securely access SpiderDuo behind firewalls without a VPN, additional software, or the need to change existing firewall settings
|
|
|
|
see the results for the following category : 
