|
|
|
The FE is a Butterfly Valve, specifically designed for water applications. Full flanged body with oval holes to fit with flanges in various standards. Lug version available, with AISI 316 inserts. Ergonomic hand lever with locking device and flow throttling. Easy actuation, even after installation in the pipeline.
|
|
Description:
The silicone vane of the CO.RA.TABLET VALVE .allows the opening and closing of the valve without any damage to the product. The TABLET VALVE is easy to disassemble and clean.
|
|
TORK Pneumatic actuated valves are two types
1. Pneumatic actuated butterfly valves
2. Pneumatic actuated ball valves
T-PAV 800 Series Pneumatic Actuated Butterfly Valves;
double acting actuated butterfly valves and single acting actuated butterfly valve ,
TORK Pneumatic actuated valves accessories :
1)solenoid valves, 5/2 or 3/2 way(namur standard or standard type).
2)Limit switch box (shows valve position,and takes electrical signal )
3)positioner(proportional control application)
4)mounting kits(non standard valves)
5)Ex-proof solenoid valves
6)manuel ovirride
7)I/P Converter and PID control panel
TORK butterfly valves;
connection butterfly valve:wafer type ,lug type,Flange,
body: GG25 cast iron,stainless steel,PVC,
TORK pneumatic actuators ; double acting,single acting,
Butterfly valve seal and disc :EPDM,NBR,VITON,PTFE and disc:cast iron, stainless steel 304, 316
Certificates:CE(TUV) , ISO9001:2000 TUV, GOST, TSEK, LOYD,UNSEPRO,
|
|
|
|
|
|
Process Solutions offers Coira-style sanitary butterfly valves for powder handling.
Materials of construction: Stainless Steel (T-304/T-316L), Steel, Polyethylene, C-276 (Hastelloy )
There are three types of valves:
Standard disk valve:
T-316 stainless steel construction on the vane and valve body
Silicone gasket (alternative materials available - Teflon, EPDM, Buna, Etc.)
PTFE bushings
Available with a manual handle or actuated (pneumatic or electric)
Standard finish: internal #7 polish, external satin finish
Rotary disk valve:
T-316 stainless steel construction on the vane and valve body
Silicone gasket (alternative materials available - Teflon, EPDM, Buna, Etc.)
PTFE bushings
Available with a manual handle or actuated (pneumatic or electric)
Standard finish: internal #7 polish, external satin finish
Flexible disk valve:
T-316 stainless steel construction on the valve body
Silicone construction on the vane (stainless steel reinforced)
Silicone gasket (alternative materials available - Teflon, EPDM, Buna, Etc.)
PTFE bushings
Available with a manual handle or actuated (pneumatic or electric)
Standard finish: internal #7 polish, external satin finish
|
|
BODY: SS304/ SS316/ SS316L
ENDS: BS/ SMS/ DIN 3A WELD/ MALE/ CLAMP
DESC: OUT FROM FULL MACHINED, HIGH POLISHED.
RA LASS THAN 0.6m
HANDLE:
DIFFERENT NYLON RE-FORCE & SS HANDLE GRIPPER, PULL, PRESS TYPE. POSITION 2 TO 12 FOR OPTION.
|
|
The Series 486 inflatable seated butterfly valve from Posi-flate features a fully machined 316L stainless steel housing. The single piece disc and shaft is available in a number of materials including 316L stainless steel and hastelloy. The disc may be polished to a mirror finish or coated with PTFE, nylon or other high performance coating.
The stainless steel valve is ideal for powders, granules, slurries and liquids and is available in sizes 2" (50 mm) to 20" (500 mm). Typical applications include loading and unloading of process material, sterile air control, and outlet valves for storage containers or hoppers.
|
|
|
|
|
|
SOMAS metal seated butterfly valves have as standard a seat made of solid stainless steel.
The unique design of disc and seat gives tight shut-off. As standard the butterfly valves meet the leakage class ANSI B.16.104 class V (Class VI for valves with PTFE-seat).
The metal seated butterfly valve has opened new opportunities for demanding applications. The design of the VSS- and MTV-valves in combination with choice of materials provides the widest possible range of applications for control as well as on-off.
The combination of low weight, short face to face dimension, simple operation and, above all, good tight shut-off make the valves an advantageous alternative for most control- and shut-off applications.
The universal design, enabling the valves to be manufactured in several different materials, broadens its field of application. The high velocity will have no effect on the metal seat and the valve will keep its tight shut-off ability for many years of operation.
The butterfly valve can be used for both clean and contaminated fluids, gases and vapours. For control installations the valve is fitted with SOMAS pneumatic actuator and positioner.
With dimensions up to DN 1200 and pressure classes PN 10-50 we are able to cope with most applications within the process industry.
|
|
1. FEATURES
The centerline of the cone is rotated away from the valve centerline
resulting in an ellipsoidal profile and providing the third offset.
With this geometry, seat seal interference is completely eliminated
ensuring long sealing life.
The triple offset is reasonably desinged to metal seated valves
providing bubble tight performance on high temperature, high pressure
and firesafe applications
2. DESCRIPTION
-. SERVICE TEMP' : -20C~+500C
-. SERVICE CONDITION : SEA WATER , OIL , ACID MEDIA , DUST , CHIP, ETC
-. FLANGE RATING : ANSI(150P~900P) , AWWA , DIN , JIS(KS) , ETC.
-. SIZE : 50A(2")~3000A(120")
-. FLANGE TYPE : WAFER , LUG , FLANGE , WELDING TYPE.
-. ACTUATOR : GEAR , LEVER , MOTOR , AIR CYLINDER , CYLINDER , ETC.
|
|
1. FEATURES
HTBF is the large butterfly valve which has individual cooling device for
body, disc, shaft and seat without using CASTABLE(special material used for
standing high temperature).
Cooling device using water / N2 Gas is installed at body and body-seat,
cooling device using N2 gas is installed at disc, and cooling device using
water is installed at shaft. This valve can be used in high temperature of
800C when all cooling devices are operated.
2. DESCRIPTION
- SIZE : 3"- 100"
- TEMP. : -100-800 DEG. C.
- MEDIA : SEA WATER, DUST, OIL, GAS, CORROSIVE MEDIA.
|
|
|
Operating conditions encountered in the automatic controlling of gas and air flows often require valves with an adjustable flow curve which can be altered at various points of opening to obtain the desired amount of flow. With Hauck adjustable flow valves, the flow rate can be easily changed at any of the 10 or more adjusting points provided. Therefore, the valve flow curve can be characterized to suit different constants in pressure, flow suction, or discharge resistance occuring at the minimum, maximum or in-between capacities.
|
|
TYPE CENTRIC, SINGLE ECCENTRIC, DOUBLE ECCENTRIC, TRIPLE ECCENTRIC
SIZE RANGE 1-1/2 TO 80
BONNET TYPE NA
MATERIAL A126 CL.B, A536, BRONZE, WCB, CF8, CF3, CF8M, CF3M, CF8C, CF10,
DUPLEX, INCONEL, MONEL, HASTELLOYetc
PRESSURE RANGE CL 125 TO 1500
ENDS WAFER, LUG, DOUBLE FLANGE, BUTT WELD
OPERATOR LEVER, CHAIN LEVER, WARM GEAR, PNEUMATIC, HYDRAULIC, MOTORIZE
|
|
High Performance Butterfly Valves
Sealing PrincipleIn the 70s XOMOX developed a complete product line of soft and metal seated XOMOX High Performance Butterfly Valves (HPBV) for severe service applications in numerous industries. Very high temperatures and inflammable media are some typical application fields for those outstanding valves.
As reliable shutoff and throttling devices they meet all requirements of todays highly specialized industries.
|
|
Product DesciptionF
Standard: ISO, DIN, IDF, SMS
Material: SUS304,SUS304L,SUS316,SUS316L
Working principle:
Remote-controlled operation by the driving gear
Three drive forms:
a.Normally closed
b.normally opened
c. opened and closed by two air flues separately
Application:
Pharmacy, beer, food, dairy, beverage, cosmetic, chemical industry
Technical parameter
Max. Product pressure: 1000kPa (10bar)
Min. Product pressure: Vacuum
Range of temperature:
-10 º C- +95º C
Size:
DN25-150/1-6
|
|
|
|
|
|
Product Details
size: 60 mm to 450 mm
Sleeve: NBR/ EPDM/ VITON (Easily removable)
Body: Cast Iron (WBN)
Disk: SS 316
Pressure: 5, 10, 16 Bar
FEATURES
Rugged, simple design, Ultimate in qulaity. 100% factory tested under water / Air befor the valve is packed and shipped
Butterfly valve is provided wth blow out proof stem
Body is phosphated and Epoxy painted
Perfect smooth Spherical disc for proper contact with seal
Burnished stem for smooth working. The accurately machined valve body and disc results in low operating torque
The stem is available in SS 410, SS 420 and SS 316. Marked for material identification
Same butterfly valve can be mounted for EN 1092, ASME/ ANSI, JIS and BS-10.
Downstream connection: Rotex Butterfly Valve Series TITLI can be used for Downstream connection, held with Hexagonal Nut (DIN 934). The Butterfly valve can also be used for end of line connection with or without a blind flange
TECHNICAL DATA
Nominal Diameter : DN50 - DN600
Pressure Range (bar) : PN6, PN10, PN16
Flange accomodation : EN1092 (PN6, PN10, PN16)
ANSI B16.5 Class 150
JIS 5K, 10K, 16K
BS10 TABLE E, TABLE F, TABLE H
Face to Face Dimension: API 609
Operating Pressure : Maximum 16 bar
Differential Pressure : Maximum 16 bar
Vaccum : Depending on media and temperature
Leakage Class : 100% tightness at full differential Pressure
Standards Followed : ISO 5211, DIN 475, API 609, ANSI B 16.5 150lb, EN1092
|
|
CONSTRUCTION
Wafer body, double eccentric disc, adjustable stuffing box, The PTFE seat is energized by the Inconel metal seat, anti-static device, fire safe, blow-out proof stem.
CHARACTERISTICS
Internal wetted parts are in acc. to NACE Standard MR0175.
|
|
General description
Butterfly valves are the most efficient and reliable sealing Isolation valve mechanism under high vacuum working conditions. A vacuum seal provided around the plate periphery in the main body of the valve ensures fail proof working of the valve. For efficient working of the valve it is advised to ensure that the sealing plates are facing atmosphere.
Butterfly Valves are of small in terms of thickness which ensures easy and faster passage for air and gases and are ideally suited for "In-line" isolation purpose. Though the butterfly valve is not intended to be used as an independent valve, it is widely used as a Baffle Valve in union with a chevron baffle at the top of a Diffusion Pump. These Butterfly Valves are offered in stainless steel SS-304 non-magnetic AISI quality high carbon steel chromium plated construction and they can be manually or pneumatically operated as per customer choice.
|
|
| ... products without technical information |
| |
|
|
