|
|
| Butterfly control valves suitable to control high flow rates. The floating or elastic seat rings and the multi-eccentric design together with the angle-seated vane guarantee zero leakage and a movement of the plug without stick-slip effects. |
|
| MAXON flow control solutions keep thousands of plants and products moving every day. With a wide breadth of solutions from intelligent mass flow control to economical mechanical control, our flow and ratio control valve products provide dependable, accurate control of air and fuel world wide. We invite you to browse the following product information for your flow control needs. |
|
Butterfly valves
DN 15 – 50; valve bodies in PVC-U, brass, DN 15-250 PES, DN 15-2000 cast iron, S. G. iron, cast steel, stainless steel; connections to DIN, ISO, AMS, BS, ASTM, JIS), LUG and Wafer type butterfly valve bodies; seal materials in CSM (Hypalon), NBR (Perbunan), FPM (fluorine rubber), EPDM, PSI, Nitrile, Carboxylite, natural rubber, Butyl, Silicone, PTFE, Ultraflon, metal sealing, fire-safe; manual, pneumatic and motorized operators; check valves
|
|
Whatever you want from a Bulk Materials cut-off valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’ |
|
WAFER TYPE BUTTERFLY VALVE Z 011-A
FEATURES
- Absolutely tight sealing with flow in either direction
- The valve body and disc are accurately machined which results
in low operating torque, long service life and reliability.
- Triple shaft bearings prevent shaft deflection and guarantee
optimum guidance even after many years of operational service.
- Four flange mounting holes ensure correct valve location.
- Single flange mounting is possible (please request details
from our Technical Department).
- Can be installed in any desired position.
- Maintenance-free
- Can be disassembled, material-specific recycling possible
GENERAL APPLICATIONS
- Chemical and petrochemical industries
- Water and wastewater technology
- Pneumatic materials handling technology
- Shipbuilding
- Power generation industry
- Food industry
- Civil engineering
- For paint and laquers, a silicon-free Version is available. |
|
| Used for air, gas and oil proportioning control, the MICRO-RATIO® Oil and Gas Valve assemblies have a multiple screw cam assembly. This oil flow valve's assembly provides mechanical adjustment capabilities to the air/fuel ratio at each valve position throughout the entire capacity range of your burner system. This gas valve provides a fully adjustable throttling range and is designed to operate over the extremely wide turndown capabilities of Maxon's modern industrial burner systems. |
|
Features:
Rated at 150 PSI
Full Body V-Notched Liner
Fully Supported Flange Bolt Holes
Stainless Steel, Blowout Proof Shaft
FPM, EPDM or Nitrile Liners
Wafer Body Design
Two-Year Warranty
Options:
Stem Extensions
Gear Operators
Electric or Pneumatic Actuators
PVDF Discs
2" Square Operating Nut
Titanium Shaft
Lug Body Design
|
|
Remote Control Valve:
Hayward's Pneumatically Actuated Diaphragm Valves are designed for the reliable, remote control of liquids in piping systems. They are suitable for both clean and slurry type fluids at pressures up to 150 PSI.
Position Indicator:
You never have to guess if a Hayward Diaphragm Valve is in the open or closed position. A visual position indicator comes standard with every valve.
Powerful Actuator:
The actuator used to operate the valve, while lightweight and compact, is still powerful enough to open and close the valve at all internal pressures up to the full rated pressure of the valve,150 PSI.
No Corrosion Problems:
Hayward's Diaphragm Valves stand up to the most aggressive fluids and they will never rust, corrode or contaminate the process fluid. Even the actuator housing is plastic and requires no failure prone coating or painting.
Modular Options:
Several modular design options are available. This concept is very cost effective because the actuator can be configured exactly for a specific application using only the options required. You never have to pay for options you do not need.
|
|
| Pipe ends are calibrated during the flanging process to create a smooth connection. This ensures a further protection against wear and tear. |
|
Connection guaranteed: a wide range of functions and variants - always harmonised to the respective requirements.
• Exhaust air/supply air flow control or without non-return function
• Flow rate 15 ... 4,300 l/min
• Threaded connectors M3 ... G3/4
• Push-in fittings QS3 ... QS 12 or PK-3 ... PK-6
• Variants with increased corrosion resistance
|
|
| A family of in-line composite body flow controls, needle valves, and check valves that are tough and corrision resistant. Four stage, tapered needle design provides infinite control. Tamper resistant locking ring prevents unwanted adjustments to the valves. These can be used in-line or be panel mounted. ARO's 360 degree Swivel Right Angle Flow Controls are ready for installation on all ARO Cylinders. |
|
The miniature Preset Flow Control is ideal for many applications involving pneumatic systems, including the control of cylinder speed.
The operation of the flow control is based on the movement of a small disc. The flat surface on one side of the orificed disc seals and permits flow through the orifice. The amount of flow permitted in the reverse direction is determined by the orifice size. In the forward direction full flow is permitted. The flow controls design allows a maximum supply pressure of 75 PSI with a minimum cracking pressure of less than 10” H2O. Orifice sizes are available from .004” to .040”. |
|
The Magna Flow Control Valve with an easy to read micrometer dial offers an amazing 1100 precise set points to accurately control flow of gases or liquids. The extremely high CV of the Magna Flow control valve enables very high flows for whatever media is being controlled, up to 200 PSIG pressure or full vacuum. Linear flow characteristics provide easy to set and precise metering of gases and liquids for almost any application where accurate results are required.
Available in either light weight impact resistant nylon or clear polycarbonate construction, the Magna Flow Control Valve offers superior strength and corrosion resistance, making it ideal for use in hundreds of different applications. Simplicity of construction, with removable top and bottom caps, provides easy disassembly for cleaning or maintenance without removing the valve from service. Proven O-ring seals provide a positive zero tight shut-off. Replacement of seals, if required, is quick and easy because disassembly is simple and fast. The Magna Flow Control Valve offers all these features at a very affordable price. |
|
ASCO/JOUCOMATIC has developed a wide range of valves for all fluids, whether neutral or aggressive, made out of brass, bronze, cast iron or 316L stainless steel.
Reliability is ensured by:
* A monobloc rod, with stainless steel from the reed to the piston
* Guidance by 2 extra-large PTFE bearings.
Pilot solutions: solenoid valves on valves or mounted on subbases and valve islands.
|
|
This type of valve is actuated by pressure acting on a piston or diaphragm. The fluid is usually neutral e.g. air, water, hydraulic oil. The pressure range varies and is specified accordingly in a data table.
"Normally Closed" (N/C) valves of this type remain closed under spring pressure, when de-activated.
"Normally Open" (N/O) valves of this type remain open under spring pressure, when de-activated.
When pressure is connected to port "Z" the valves open or close according to type.
A separate 3/2 pilot valve is used to supply pressure to port "Z", it is mounted either directly on the actuator or remotely.
In some cases a 4/2 or 5/2 pilot valve will be required. The main valve position can be N/C or N/O. The basic position is determined by connecting the pilot valve output lines accordingly. (The direction of flow is usually indicated by an arrow or shown schematically on the body). |
|
TORK T-PV Series ,pneumatic piston valve
application: water,air,steam,gas,natural gas,chimicals,petroleum products,food,sterilazation,water treatment,dyeing,cleaning plant,aggressive liquids,vacuum application,oil,petrol,alcohole,hydroulic liquids,salt solutions,acids,organic solvent
All body is AISI316 Stainless Steel,high flow rate,high quality,compact,suitable vacuum application,normally open and normally closed position.
advantage of TORK pneumatic piston valves:less pressure drop than globe valve,
short open-close time
high flow rate
body and actuator AISI 316
screwed,flanged and welding connection
on-off and proportional control
TORK T-PV Series ,pneumatic piston valve series range
T-PV.S700 Serie; Screwed connection, 1/2"......2" G( BSP ), on request NPT connection..
T-PV.W700 Serie; welding connection, size :from 1/2"......up to 2" .
T-PV.F700 Serie; Flange connection,size:from NW15.....up to .NW50 .
T-G.3W Serie: Solenoid valve,1/4"-3/2 way.it is used on-off control pneumatic piston valves
T-SW Serie: Proximity switch limit switch box ,gives signal when valve open-closed. |
|
Hayward Needle Valves are used for accurate metering of fluids. Turning the thumbwheel moves a tapered piston into the PTFE seat to control the flow down to a few drops per minute. Precision molded,fine pitched stem threads permit this very fine metering flow control.
|
|
Style 175 GTO Gas Valve
- Permanently lubricated at the factory for maintenance-free service
- Low operating torque - No plug "freezing"
- 100% shut-off; 360° turn or 90° Open Left operation
- Features a superior tamper-proof design
- No leakage to the atmosphere
- One valve covers full pressure range
Designed to meet the requirements of ANSI B16.33 1981, the Dresser® Style 175 GTO Gas Service Valve incorporates the same complementary sealing principles as the Style 175 meter curb valve, yet offers a rated working pressure to 175 psig. Each GTO valve is 100% factory-tested at high and low pressure while in a clear non-corrosive fluid.
Just as the Style 175 meter curb valve, the GTO is assembled at the factory and sealed against tampering by a spring loaded stainless steel retaining ring which cannot be removed with ordinary tools. It is tamper proof as specified in D.O.T. 192.363 Part C.
A plastic ring inserted between the retaining ring and bonnet, plus permanently lubricated port seals, assure low, uniform operating torque, preventing the plug from freezing to the body. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
