|
|
|
MAXON flow control solutions keep thousands of plants and products moving every day. With a wide breadth of solutions from intelligent mass flow control to economical mechanical control, our flow and ratio control valve products provide dependable, accurate control of air and fuel world wide. We invite you to browse the following product information for your flow control needs.
|
|
OMAL butterfly valves, available in wafer or lug version from DN 40 to DN 400, designed and manufactured to be used in the most difficult and troublesome industrial fields.
OMAL guarantees TOP-QUALITY production, since all its valves are submitted to hydrostatic, pneumatic and working tests before delivery: you'll be sure to choose the right product!
Therefore, the following pages will provide you with a useful list of all our materials and features to help your choice.
However, our technical department is always at your complete disposal for any information you may need.
If you choose an OMAL valve, you will get ease of use, total reliability, minimum losses, reduced dimensions and weights, quick maintenance and easy applications of pneumatic or electric systems.
|
|
| J+J, a UK ISO9001:2000 quality approved valve actuation specialist company, offer a wide range of butterfly valves fitted with the J+J reversible weatherproof multi-voltage electric actuator. Valves are typically supplied with cast iron body, ductile iron body, stainless steel body and plastic body, with a variety of disc and liner materials. All valve and actuator packages are built and tested in-house. |
|
2-Way & 3-Way
Wafer and Lug Style Bodies
For Mixing & Diverting, Hot & Chilled Water, Steam & Special Applications |
|
2" Butterfly valve with EH2 actuator
- Valve Body: Cast Iron (2-3") Aluminum (4")
- Disk and Stem: 316 SS
- 175 PSI MAX @ 70F (2-3")
- 70 PSI MAX @ 70F (4")
- 277 GPM @1CV
- Manual override capabilities
- EH2 version, limited duty use only
EPDM, VITON®, BUNA seats available for varying applications.
Consult an Engineer or Sales for applicaiton assisance to see if this set up will work for you! |
|
| ... products without technical information |
| |
| The TDRPRO 5100 Series is a programmable, multi-function, multi-voltage time delay relay with multiple time ranges for the ultimate in flexibility. The TDRPRO 5100 features thumb wheel adjustment for impeccable accuracy. The two indicator LEDs allow the user to know when power is present at the coil, output is energized, or if the relay is performing one of its 10 timing functions. |
|
| DPDT/4PDT, 3-5 Amp, socket compatible miniature time delay relay. The TDR782 series is a single function, single voltage miniature time delay relay ideal for tight spaces. |
|
multi-function
- single, dual, multi & zoom supply voltage options
- 8 timing functions selected by dip switch
- SPCO or DPCO output relay
- 6 selectable time ranges
- LED indicators for power supply and contact
- 22.5mm DIN rail mount housing or 11pin plug in housing
|
|
on - delay
- single or dual supply voltage options
- SPCO or DPCO output relay
- 6 selectable time ranges
- LED indicators for power supply and contact
- 22.5mm DIN rail mount housing or 11pin plug in housing
|
|
This versatile time relay has 8 modes of operation, 9 timing ranges and a large easy to read LCD display with numerical information. The display carries a wide range of internationally understood annunciators to indicate all the modes, direction of timing and the status of the output at all times.
Simple programming via menu driven display.
- Large, easy to read LCD display.
- 8 timing modes: ON DELay (ON DLY), OFF DELay (OFF DLY), One Shot (OS) and Single Shot (SS). Repeat Cycle (RC) modes: Delay, Cycle, Symmetrical Delay and Symmetrical.
- 9 timing ranges from 0.2 seconds to 99999 hours.
- Internationally understood annunciators for operating modes, time units, low battery, relay output state and trigger type.
- Self powered with 10 year battery life or 10 6 operations (customer replaceable lithium battery).
- Opto-isolated inputs 12 - 260VAC or DC.
- Three different triggering mechanisms.
- Relay contacts rated at 8A, programmable to NO or NC.
- Environmental protection to IP65.
- CE approved, UL and cUL pending.
The timing input can be LEVEL TRIGgered, EDGE TRIGgered or EDGE RETRIGgerable. The essence of RE-triggering is that subsequent pulses on the timing input can start a new timing cycle. Time is on the Main Display and the Set Time on the lower display.
|
|
Preselection and multifunction up/down counters 48x48 - CPT4
Totalizers - LCD 24 x 48 (Hour counter/chronometer)
Totalizers - LCD 24 x 48
Total/partial impulse counters - LCD 24 x 48
Hour counters - LCD 24 x 48
Electro-mechanical hour counter CH 48 G
Electro-mechanical impulse counters totalizing - 24 x 48
Electro-mechanical impulse counters totalizing - 36 x 37
Electro-mechanical impulse counters totalizing - 36 x 48
|
|
|
Timers are used in applications where time is the main focus. To make a process more efficient, effective or safe, timers are used to determine how long a machine has been running in order to schedule machine maintenance.
|
|
| The new 820 Series Time Delay Relays are DIN rail mountable products offering 10 different timing functions, 2 status LEDs, ultra-wide timing range (0.1 sec to 10 days) and a universal voltage input (12-240 VAC/VDC) all in one modular package. The 821 is available as a 15 amp SPDT timer while its counterpart 822 is available as a DPDT timer also capable of switching up to 15 amps per pole. |
|
Timers (elapsed time meters, hour meters) are used in applications where time itself is the main focus. These include simple knowlege of how long a machine has been running to determine machine maintenance. Examples include: filter change frequencies, elevator cable maintenance, and engine oil life indication. Timers generally have the ability to stop and then continue on from the point at which they stopped.
Electromechanical timers are perfect for applications requiring a readable display when no power is supplied. They are also resistant to tampering and harsh conditions, such as shock.
Electronic timers typically have a brighter display, and are more flexible. Many electronic timers have programmable time ranges and can be set to values other than 0 for replacement applications.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
