|
|
Series D standard case
- plastic case constructed from
impact-resistant polystyrene, 3mm
- connected by snap locks; no screws
required
- easy assembly
Specifications
Application:
case for boards or small modules
Material:
polystyrene, 3mm
|
|
Self-extinguishing insulated boxes with double insulation. The bases and opaque lids are in PVC and the transparent lids in polycarbonate. Polished light grey surfaces to RAL 7035.
- Sealing gasket in all models.
- Lid fixing by lodking screws or hinges.
|
|
Material :ABS,PC OR PC+ABS
Temperature arrange:-20 ~ 60
Flammability rating:UL94HB
Most of 10 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
A wide range of size
Designed for mounting P.C.B. or DIN rail mounted terminal
Transparent lid is available for most models.
Wall mounting holes and lid attaching screws are outside the sealing area
Custom material and color available (Bone as standard color)
Standard delivery:1 box,1 lid,4 or 6 screws,1 seal
|
|
|
Made of halogen free, impact resistant, self-extinguishing thermoplastic material. SCABOX junction boxes are designed for power distributionin outdoor installations and for housing relays, timers, connecting strips, etc.
|
|
Thermoplastic enclosures are light, their impact resistance is very high and they are easy to clean. In addition, they are easily mounted and machined.
Polycarbonate is suitable for demanding conditions and also for outdoor use. The temperature resistance of polycarbonate ranges from -50 C to +120 C.
ABS is a more cost-effective material than polycarbonate. However, it is only suitable for indoor use. ABS has good resistance to certain chemicals, e.g. strong detergents used in dairies.
The Ensto Cubo M enclosures are made of glass reinforced polyester. Thanks to their sturdy construction, 7 Nm impact strength, corrosion and weather resistance and high tightness, they meet the demands of durability in severe environments.
|
|
PL6 Series GRP
The Ultimate In Robust GRP Construction.
Anti-Static Properties.
External Mounting Feet.
Corrosion Resistant Stainless Steel Lid Fixing Screws With Nylon Retaining Washers.
Durable Captive Moulded Silicone Gasket.
Stainless Steel Rating Label.
PL7 Series GRP
The Ultimate In Robust GRP Construction.
Anti-Static Properties.
External Mounting Feet.
Integral Steel Earth Continuity Plate.
Corrosion Resistant Stainless Steel Lid Fixing Screws With Nylon Retaining Washers.
Durable Captive Moulded Silicone Gasket.
Stainless Steel Rating Label.
|
|
|
|
|
|
|
Richard Whr GmbH does not only have in its program an enormous selection of standard housings, but is also in the situation to supply a customized solution co-ordinated with the respective application. Anywhere, where in the industrial, commercial, public and medical surrounding field one measures, one regulates, one steers, one examines and one seizes, are the housing systems the ideal solution manufactured developed by Richard Whr and. Influences like electromagnetic and electrostatic loads/unloadings, temperature differences, heat, cold weather, vibrations, impacts, shock loads, dirt, dust, humidity u.v.m. require everyday life and industrialsuited concepts, in order to thus exclude malfunctionings of controls and the endangerment from humans and machine. For many applications standard designs present themselves for favourable prices. On the basis of the key components ready to be installed customers in the building block principle PCPC PC, display as well as indicating and control stations can manufacture housings/mechanics, keyboard and CONTROLLER as well as further accessories. To the offer furthermore extensive services belong in the range sheet metal working, like consultation and construction (production of production-correct designs and data files), stamping machines and a transforming, milling, thread cut, bend/edge, slam shut, saw, weld, sharpen and deburr, pins press in/pins weld and rivet, bore, turn, to surface technique for optimum, decorative optics and reliable protection (, paint, powder-coat, screen printings, (glass bead) jets brush), complete solutions and system engineering.
|
|
- flexible use in
- advertising technology
- information technology
- sports facilities
- for indoor and outdoor use
- stylish frame design
- with single- or double-side display
field
- can be mounted upright or hanging
- non-glare plexiglass, tempered glass
or laminated safety glass panels
- customized solutions
- standard models are available
- up to IP 54 degree of protection
- corrosion-protected fixtures
|
|
outdoor racks and enclosures
applications
- Mobile telephony: energy racks.
- LAN, WAN networks.
- Metering stations.
- Electronics.
range
- Metal or polyester indoor racks and enclosures.
- Metal (simple or double skin) or polyester outdoor racks and enclosures.
- EMC protection.
- Anti-vandalism protection.
- Anti-seismic protection.
- IP 42, IP 55.
- Cooling by convection or by cooling unit.
- Adapted to accept 19" components.
- Individual product configuration.
|
|
MNX polycarbonate and ABS enclosures utilize world-class injection moulding technology. They are designed to house and protect all kinds of electrical and electronic components in the most demanding applications. The MNX includes more than 260 different variations.
Dimensions range from 100*100*35 mm to 255*180*175 mm.
PC: IP 66/IP 67; IK 08; NEMA 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/IP 67; IK 07; NEMA 1, 4, 4X, 6 (12 and 13); UL94HB
|
|
|
Stainless steel enclosures are suitable for many environments, such as the chemical, food, pharmaceutical and oil industries. Being one of the fi rst on the market with stainless steel enclosures. Eldon have a long history and experience with this kind of product.
|
|
ATEX
EX enclosures are specially made for use in hazardous environments. They are designed, manufactured and tested to international standards. All certificates, such as ATEX, are issued by the manufacturer under license from a test authority. EX enclosures are made of either aluminium, polycarbonate or polyester.
- Aluminium from 45*50*32 to 600*310*180 mm
- Polycarbonate from 188*188*130 to 558*378*180 mm
- Polyester from 75*80*55 to 405*400*120 mm
AL: (ALX) IP 66; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13
PC: (FEX) IP 66; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
PE: (PEX) IP 66/67; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
|
|
|
Cases plastic: various materials: polystirene, polycarbonate reinforced glass fibers, dimensions of 50x52x35mm with 361x254x165mm, sealing IP66, full or transparent lid, boxes with buttons plastic, cases electric plastic, boxes distribution plastic, joint boxes cable plastic, self-extinguishing, high impact resistance and to the chemicals
|
|
From simple emergency stop switches to complete industrial PC's or CNC units - such complex modules need to be adapted to the rough conditions prevalent in industrial environments.
ROSE operating, display and mobile control enclosures provide reliable protection to the built-in electronics while offering a high degree of user comfort.
Depending on the area of application the enclosure systems can be adapted individually to provide higher protection degrees.
|
|
These boxes comply with the norm NFC 15-100 .
They provide optimal protection against electric contacts: differential devices, isolating plastrons and casing.
|
|
|
These panel enclosures are designed for supplying electricity to workstations in workshops, mainly for car industry.
|
|
Functionality and safety for the built-in electronics.
Variability and the best possible adaptation to individual electronics are the key features offered by ROSE electronic enclosures. The three product lines provide the best possible protection in all applications.
Multitronic - PCB enclosures in many different designs
Profitronic - Profile enclosures for sophisticated electronics that can be used both indoors and outdoors
Wavetronic - Desktop enclosures for lab and instrumentation technology, variable in height
NoVoTronic - Aluminium profile enclosure system in 3 sizes. For data collection, PC, measurement and control technology.
|
|
Technical Data:
Version: II B
Explosion protection: Ex II 2 G
Ex II 2 D
Ex d, Ex d[ia] II B
Certificates: empty enclosure: INERIS - 00 ATEX 0021 X
Material: copper free aluminium
Surface treatment : unpainted, painted on request
Ingress protection : IP 65/67 in accordance with EN 60529 on request
Temperature range:
-50C to +55C / Ex-d IIB T6/T5/T4
-50C to +40C / Ex-d (ia) IIB T6
-50C to +40C / Ex-d (ib) IIB T6
-50C to +55C / Ex-d IIB+H2 T6/T5/T4
-50C to +40C / Ex-d (ia) IIB+H2 T6
-50C to +40C / Ex-d (ib) IIB+H2 T6
|
|
modularity
consistent dimensional range, graduated and logical, enabling fast and adapted selection; precise correspondence of boxes means perfect alignment
MUREVA family
the junction box is at the heart of the MUREVA family, now comprising
enclosures, junction boxes and equipment
infallible
the patented mixed EVA/stepped entry enables direct entry of cables.
Cables and tubes are tightly retained for total sealing.
|
|
|
|
|
|
Spacial 3D.ATEX enclosure
The new "ATEX European Directive", relating to equipment used in explosive, gas or dust-laden atmospheres imposes significant improvements in safety of persons and equipment in chemicals,
refining, flour-milling, grain storage, etc. From 1st July 2003, only those products that meet the requirements of this directive can be marketed and installed.
* The Spacial 3D.ATEX enclosure range is ATEX approved by the LCIE under
reference number 02 ATEX 0037 U.
* Enclosures carry double marking:
- new approach: 00 81 Ex II 2 G/D,
- additional marking according to
EN 50014 and EN 50019 stadards: EEx e II.
technical characteristics
* Sheet steel enclosure.
* Degree of protection: IP66.
* Ambient temperature maximum permissible range -25C to +40C.
* External mechanical impact resistance: IK 10.
* Textured epoxy polyester powder paint finish, colour grey RAL 7032.
* Enclosures are fitted with 4 shouldered M8x25 backstuds for chassis attachment..
* Polyurethane seal.
* Compared to the Spacial 3D universal enclosure, the Spacial 3D.ATEX enclosure offers:
- 4 fixing holes fitted with 4 crimped blind nuts,
- crimped blind nut for external earth connection (earthing braid not supplied).
|
|
ratiopacPRO / -air
- Case with 19"-compatible dimensions
- Identical front and rear structure (symmetrical)
- Identical space for boards in all versions
- EMC shielding optional via gaskets
- Suitable for extraction handles complying with IEEE 1101.10/11 for CompactPCI and VME 64x applications
propac
- Desktop case or portable case p case or portable
- Design alternative for compac
- Degree of protection IP 20
- EMC shielding optional via gaskets
- Extensive accessories, for portable applications
- High stability
compac
- Desktop case or portable case
- Degree of protection IP 20
- High stability, configured for portable application
- Identical front and rear structure
comptec
- Can support 19" subracks
- Height 3 U to 12 U
- Degree of protection IP 20
- High stability
- Identical front and rear structure (symmetrical)
- With protective earth connection
|
|
|
HUMMEL aluminium enclosures are made of Al Si 12 and are silver grey powder coated. Hinges can be mounted to its sides, latches to the bottom. Aluminium resist numerous alcalis and chemicals as well as oil and gasoline. They are very impact resistant.
|
|
Sturdy, flexible and portable, modular, elegant design, EMC, IP, Handles & Feets i. e. for the use in Test & Measurement. General electronic packaging and medical industries.
|
|
DIN-MODULAR CASES TYPE A:
The DIN-MODULAR CASES TYPE A differ from conventional systems for mounting control panels complying with DIN IEC 61 554 through simple, screwless assembly of all case parts. This reduces production work and ependiture to a minimum. A further advantage of this design principle is the implementation of flexible case lengths to match the application exactly.
DIN-MODULAR CASES TYPE B:
THE DIN-MODULAR CASES TYPE B is available in 3 different case designs.
- For horizontal slide-in mounting of PCBs from the front, there are closed cases with removable front frame and rear panel.
- Versions with separate lids allow vertical and horizontal slide-in PCB assembly.
- A special version for 19" racks rounds off the comprehensive range.
|
|
|
|
|
|
Mobile enclosures are one of the main areas in the developement of new products at OKW. This makes it possible for us to present to you the whole variety of our system.
Depending on the type, the cases are already prepared for the use of standardised LCD and graphics displays, standard batteries and rechargeable batteries, PCMCIA cards, switches and membrane keyboards.
Mobility and ergonomics:
The working world is becoming increasingly mobile. We at OKW have made it our goal to offer you the cases to make this possible, with optimum user-friendliness and functionality. In the development of new solutions, therefore, design and product ergonomics are the main focus.
Design for people:
Attractive, high-quality, up to date. We use design-oriented case technology to create the basis for an increase in the value of your products.
Love to details:
- high-quality surface for the visual and tactile senses
- polished front surface for optimum efficiency level with infrared versions
- combination of different plastic material for improved touch sensation and protective function
- innovative technology
- the same aesthetic standards for cases and accessories for a harmonious whole
|
|
The comprehensive range of wall-mounting cases offers you a wide choice.
Application-specific orientation is typical for each family of cases
Your advantages:
- Ergonomic operating area.
- Practical for service personnel.
- Without/with separate terminal compartment.
- Robust construction.
- Modern design.
- comprehensive range of accessories.
|
|
OEM Enclosures- PC or ABS
Manufactured from high performance thermoplastic, polycarbonate or ABS. these Enclosures are suitable for demanding OEM applications, e.g. for the protection of electronic and pneumatic components.
|
|
These Enclosures are made of 304 Stainless Steel used in terminal boxes.
We offer acid resistant AISI 316 Stainless Steel solutions upon demand.
Standard equipment includes a perforated mounting angle to facilitate installation of the mounting plate or DIN rails. This makes it possible to drill access holes for cables anywhere along the sidewalls.
|
|
Individual switch cabinet construction
- Console control cabinets Material: Stainless steel with subsequent powder coating, textured finish
- Stainless steel box without surface treatment
- Ethernet switch housing made of steel sheet with finaly-structured powder coating
|
|
|
|
|
|
Stainless steel type Wall Mounted Enclosures, Floor Standing and Suite Enclosures, Desk Consoles, Terminal Boxes, Command Panels and special enclosure models are used in harsh environments or hygienic applications, e.g. in the chemical industry or the food and beverage sector. Their technical properties (high IP class and special EEx design, where applicable) ensure full protection even under extreme conditions (low temperatures, high humidity). Selected accessories complement this range to enable conclusive enclosure solutions.
Stainless Steel Wall Mounted Enclosures, Standard:
- enclosure and door made of 1.5/1.25 mm gauge stainless sheet steel material no. 1.4301
- enclosure fully self-contained
- door fitted with double chamfer along all edges for increased stability
- concealed hinges
- door opens ca. 147
- door fitted with 4 M6 fastening bolts
- rubber profile along all edges (IP 65 compliant, EN 60529)
- sash fasteners with 3 mm double bit insert
- 2.5 mm sheet steel mounting plate, screwed to fitting profiles
- earthing for enclosure, door, and mounting plate
- 4 drillings in the enclosure's back plane (fitted with plastic blanking plugs) suitable for wall mounting lugs or to be used for direct wall mounting
- outside surface smoothed
|
|
|
|
