|
|
Isolating critical controls from harsh environments is a job no one performs better than Hoffman. Our revolutionary enclosure solutions ensure reliable performance in a range of extreme conditions.
Aluminum Wall-Mount Enclosures
Clamp Cover
* Continuous Hinge with Clamps, Type 12
* Clamp-Cover, Type 4X
* Continuous Hinge with Clamps, Type 4X
COMPACT® Cast Aluminum Type 4X Enclosures and Accessories
* COMPACT®, Type 4X
* Hinge Kit
* Mounting Bracket Kits
* Panels
* DIN Type Rails
* Aluminum Type 4X Accessory Selection Matrix
|
|
l Hosing shell moulded in ABS
l Mount easily onto standard DIN rail
l With base for mounting rail
l PCB can be connected with terminal by welding
l Fast mount due to screwless assembly
l Custom material and color avilable
l Temperature range -20°C - 70°C
|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
|
|
|
|
DIDO-S distribution boards are available in two types: surface mounted and flush mounted boards.
Particular attention has been set to the need to give more space in the inside in order to facilitate the operations of
wiring therfore favoring the simplicity of instalation.
PE4, PE8 and PE12 boards have a particular system to fix the DIN rail; it allows to regulate its height in two positions, an
inner and an outer.
Some Flush mounted boards (CMR) answering the demands of space saving products - more compact enclosures.
All distribution boards have DIN rail and brass terminal block (earth and neutral).
The particular structure of the lid, limits the board prominence from the wall of only 20 mm, creating a product of
discrete design and presence.
The interchangeability among the doors (transparent and opaque) and their reversibility together with the large
space for the assembling make these series very versatile.
Always careful to the demands of the clients, all products are protected with a thermo-retracable film.
|
|
|
|
|
|
FLUSH MOUNTING ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*PREMARKED MODULE COVERS, INTEGRATED ON THE FRAME.
*FRAME SEPARATED FROM DIN RAIL FOR CABLE CONNECTION AND INSTALLATION AFTER PAINTING.
*TRANSPARENT DOOR WITH LOCKING DEVICE ON OPENING.
*ENCLOSURES WITH MULTIPLE HORIZONTAL AND VERTICAL MODULAR COMBINATIONS BY MEANS TO ITEM GR11028.
*MARKED CE
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
SURFACE ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*REMOVABLE FLANGE TO SIMPLY SWITCH HOUSING AND WORK INSIDE THE DISTRIBUTION BOX.
*THE FLANGE ON THE INNER SIDE, NOT VISIBLE FROM THE OUTSIDE, IS PRE -CUT FOR ALL STANDARD TUBE AND CABLE-TRAY DIMENSION.
*THE DIN PROFILE FOR HOUSING THE SWITCHES IS HIGHER OFF THE BOTTOM TO PERMIT ALL TYPES OF WIRING WITHOUT ANY SPACE PROBLEMS.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*IN COMPLIANCE WITH CEI 23-48 -I ED.1995 PRODUCTS MEETING ESSENTIAL REQUIREMENTS OF L.V.D. 73/23/EEC AND FURTHER AMMENDMENTS ( IEC 760 2 ED 1989, AM 1/1994 AND MODIFICATIONS PR. EN60670 )
*MARKED CE AND IMQ.
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
|
|
|
A range of truly versatile MCB distribution board systems providing unobtrusive final circuit management solutions for applications up to 200A. The range offers robust TP&N and SP&N distribution boards with an extensive selection of MCBs, RCBOs, RCCBs, switch disconnectors, MCCBs, fuse switch incomers, service centres and modular control and command devices.
|
|
GRP INSTRUMENT ENCLOSURE (MODEL CP)
Instrument enclosures are used to protect instrument from corrosion, chemical attack, mechanical abuse, freezing and weather.
They are made in GRP ( Glass Reinforced Polyester ) with stainless steel hardware and closed cell neoprene gasket.
ENCLOSURE SPECIFICATION
Made by two identical mouldings
Light grey colour
Waterproof construction
Antistatic
Fire retardant and self extinguishing
UV resistant
Non absorption of hydrocarbons
ACCESSORIES
Viewing window
Insulation for heat retention
Electrical heating
(for hazardous or non hazardous area)
Steam heating
Thermostat
Wall or pipe stand mounting bracket
Internal mounting bracket
Grommets, cable gland, bulkhead compression fittings
Identification label
Enclosures can be supplied fully assembled with instrument, manifold and accessories, ready to be installed on field.
|
|
For over 50 years, The MuShield Company Inc. has been a leader in manufacturing Magnetic Shielded Enclosures used to shield components from Electro Magnetic Interference (EMI).
Our expertise lies in understanding the science of magnetic shielding and providing design and manufacturing solutions for a wide range of applications.
Typical sources of interference include permanent magnets, transformers, motors, solenoids, cables, and the Earth's magnetic field.
MuShield is fortunate to have on its staff several experienced design and manufacturing engineers with extensive experience in the field of magnetic shielding and process engineering.
In order to offer you and your company a timely and cost effective quote, please send a drawing of the part you would like fabricated out of high permeability magnetic shielding material, or simply offer dimensions and/or any other pertinent information regarding your issues with EMI.
We look forward to working with your company.
|
|
Flush mounting enclosures with horizontal door
Flush mounting enclosures with vertical door
Surface mounting enclosures IP40
IP40 surface mounting enclosures with vertical hinge
IP55 surface mounting enclosures with horizontal hinge
Surface mounting enclosures series 18
Surface mounting enclosures series 20
Accessories for enclosures
|
|
Hawke International, a member of the Hubbell Inc group of Companies, has over the last 50 years, built a world-wide reputation in the hazardous area and hostile environment markets, with an innovative range of cable connection, termination and barrier products.
Our GRP Enclosure range is the ultimate in robust construction featuring Anti-Static Properties, External Mounting Feet, Corrosion Resistant Stainless Steel Lid Fixing Screws with Nylon Retaining Washers, One Piece Durable Captive Moulded Silicone Gasket and Stainless Steel Rating Label and includes the innovative new PL626 Enclosure.
Our Stainless Steel Enclosure range features a Robust Stainless Steel Construction, Electropolished Surface Finish, Softer Finished Rounded Edges, Rigid Slotted External Mounting Feet, Superior Silicone Sponge Gasket and includes the ground breaking new EZE range.
|
|
The robust junction boxes made of plastic stainless steel and light alloy are featured by their friendly mounting and installation capability and their design.
They are fitted with pillar terminals for cable of up to 6 mm2. The practical orientated housing form allows for a problem-free access to the connection
terminals for installation.
|
|
The new hand-held enclosure system for data acquisition and instrumentation in mobile applications.
Mountable components:
Chip card/magnetic readers, scanners, PCMCIA-interfaces, displays, membrane keypads, switching mat sets, plug connectors, socket connectors etc.
|
|
MCE - Modular Component Enclosures offer easy-to-use and practical functionality, and are designed to house din rail mounted automation, control and switch gear components. MCE enclosures can be connected to each other with flange openings to build bigger panels. Cable entries are available in all sides. There are 5, 9, 14, 28 and 42 module options available as stock products. Bigger sizes available upon request.
PC: (MCE Control) IP 65; IK 08; UL-94 5V; UL 508
|
|
|
The PROLINE® Modular Enclosure systems are designed to protect electrical and electronic equipment in industrial, local area networking, and telecommunications applications.
|
|
|
|
|
|
Polycarbonate Enclosure
Polycarbonate Enclosure offer excellent characteristics for the “packing” of electronic and electrical components as well as complete control systems, even with extreme outside weather conditions and resistance against UV. They are easy to machine and can be configured variably for our customers with screen-printing or with a Membrane keyboard. The lid screws cannot be lost and are made of stainless steel. The standard colour of the enclosure is light grey, similar to RAL 7035. Special paintings available on request. All enclosures comply with the protection class IP 65 according to DIN 40050. The fastening grooves are situated outside the seal range. The neoprene lid seal is resistant against oil and petroleum.
ABS-Enclosures
ABS-Enclosures are excellent for the “packing” of electronic and electrical components as well as complete controlling systems inside. They are easy to machine and can be configured variably for our customers with screen-printing or with a Membrane keyboard. The lid screws cannot be lost and are made of stainless steel The standard colour of the enclosure is light grey, similar to RAL 7035. Special paintings available on request. All enclosures comply with the protection class IP 65 according to DIN 40050. The fastening grooves are situated outside the seal range. The neoprene lid seal is resistant against oil and petroleum. Temperature resistant: - 40°C to + 80°C. EMV version with copper conductive lacquer and conductive lid seal are available.
|
|
|
|
|
|
Polyester-Enclosures accord to the high standards of machine constructions, shipbuilding, electroplating and petrochemical industries. Beside the good resistance against most solvents, acids, etc, fibreglass strengthened Polyester is difficult to ignite and is self-extinguishing. They are preferably used as clamp enclosures and as control enclosures in chemically aggressive surroundings such as Refineries or in road tunnels. All enclosures comply with the protection class IP 66 according to DIN 40050 (spray water protected).The lid screws cannot be lost and are made of stainless steel.
The standard colour of the enclosure is grey, similar to RAL 7035. Temperature resistant with Neoprene seal: - 40°C to + 110°C. Temperature resistant with Silicone seal: - 50°C to + 140°C. Special paintings available on request. The fastening grooves are situated outside the seal range. The neoprene lid seal is resistant against oil and petroleum. Special seals such as silicone are available when requested.
|
|
Uniplast range: The answer to your needs for a permament and safer protection of your electrical or electronic systems
Insulating, compact or modular system of enclosures that permits the construction of many different con·gurations, from a plain door to a transparent door, a single or double door and multi-compartment switchboard, effective even under the most severe working conditions.
It complies with the principal of "double insulation", which guarantees the maximum safety to the operating personnel.
The high quality of the material chosen for the construction of these enclosures is tested according to UL norm UL746C§26 "Ultraviolet Light Exposure".
Practice tests in a moderated climate have shown that the polyester enclosures are resistant against outdoor use and aggressive chemical environments for at least 20 years without loosing the quality of the enclosure.
|
|
|
The range of moulded endosures is made up of a wide selection of products such as modular boxes, wall fixed cabinets adapted to special applications for buildings, floor fixed for industrial facilities, electrical distribution, public lighting, etc.
|
|
|
The good qualities of steel include the potential it offers for customer-specific solutions: even a smaller production series can easily be customised. Stainless steel is suitable for outdoor use, and for demanding industrial environments. Acid-proof steel is used for environments requiring extreme resistance to corrosion, for example, in the off-shore industry.
|
|
EZE Series Stainless Steel
Better access for faster installation, easier inspection and on-site modification.
Solid back plate and base frame with a removable clamshell style lid.
Seals shielded from the environment.
Clip-in quick release gland plate.
Under-wiring possible.
Superior Silicone Compression Gasket.
Large Terminal Capacity.
|
|
|
Isolating critical controls from harsh environments is a job no one performs better than Hoffman. Our revolutionary enclosure solutions ensure reliable performance in a range of extreme conditions.
|
|
|
Slimline WallBox is a low profile 2.5U x 19” enclosure suited for telecom / datacom networking applications where equipment can be mounted vertically to overcome space restrictions. Options include various cable entry gland configurations and key locks.
|
|
QUICK
QUICK wall mounting cabinets are manufactured of high impact resistance polycarbonate or ABS withstanding harsh industrial and outdoor environments. These cabinets are equipped with quick screw covers. Transparent cover options allow easy viewing of installed equipment and indicators.
Dimensions range from 300*200*170 mm to 600*400*270 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
INLINE® Enclosures
INLINE® Instrumentation Enclosures
INLINE® Enclosure Panels
INLINE® Landscape Instrumentation Enclosures
INLINE® Landscape Enclosure Panels
DIN3 Rails
Mounting Bracket Kit
Lock Inserts
Wing Knob Latch
Grounding Kit
IS Instrumentation Enclosures
IS Instrumentation Enclosures
Mounting Bracket Kits
Handle Kit
CONCEPT® Wall-Mounted Enclosures
CONCEPT® Wall-Mounted Enclosures
CONCEPT® Sloped Top Enclosures
CONCEPT® Wall-Mounted Enclosures Accessory Selection Guide
Panel Conversion Kit
Swing-Out Rack Frame
Dead Front Kits
CONCEPT® Adjustable-Depth Mounting Kits
Adapter Bracket for CONCEPT® B-Style Swing-Out Panels
Pole Mounting Kit
Mounting Channels
Rack Mounting Angles
DIN3 Rail Kits
Grid Straps
CONCEPT® Panels
CONCEPT® Swing-Out Panels
Handles
Door Stop Kit
Data Pockets
Lock Inserts
Mounting Bracket Kits
|
|
Water-tight wall mounted enclosures IP 66 protection
Description
In steel ACM
Epoxy-polyester textured finish (RAL7032).
Automatic locking systems.
Reversible door.
Top or bottom cable gland plate.
In stainless steel ACM.X
Made in stainless steel (type AISI304).
Brushed stainless steel finish.
Enclosure fully symmetrical.
Double bar locking system.
In polyester ACP
Made from glass reinforced polyester.
High resistance to UV.
Seamless Monobloc construction.
Top and bottom built-in canopy.
Locking system outside protected zone.
|
|
|
We are developing and producing high-quality industrial enclosures according to our customers’ requirements. The combination of modern production engineering and traditional craftsmanship convince through ergonomically precise and robust casing solutions. From concept to realisation – together we will come up with your solution.
|
|
|
Cases aluminum: , electric cases aluminum, button aluminum boxes, distribution boxes aluminum, cable joint boxes aluminum, dimensions of 85x85x65mm with 200x260x85mm, resistance in temperature of -40 to +100°C, material: aluminum Al If 12, tight IP66
|
|
Robust aluminium enclosures for mechanical engineering and automation technology
Fastening possibility for DIN rails and mounting plates
Field enclosure (2 sizes) with open external fastening
|
|
HKSE system 60/80 (HSE-60/80)
Professional range of operator interface
suspension systems for automation control.
To ask for an offer for this product category, please download the pdf file (92 kb), print it, fill it in and send it via fax to the following number 0438.450426
|
|
|
|
|
|
AUTOMELEC proposes a complete pallet of services for the realization of boxes of electronics and automatism.
These services can go from the design until the realization of the tests:
- Analysis of the needs
- Choice of the components and establishment of the nomenclature
- Provisioning of the components constitutive of the box: wrap mechanical, components of automatism (driving disconnecting switches, protections, departures, relay and contactors, relays of safety, automats programmable, variable speed transmission, connecting terminals, etc...)
- Realization of the electric file with a producing software of CAM of the plans to the format dxf or dwg compatible with all the software of CAM
- Realization of the box installation of and machining
- Wiring in the respect of the standards and according to the specific rules of the customer (color of wire according to tension, type of connecting terminals, etc...)
- Classification and reference mark of all wire
- Realization of the beam of cables external with choice and provisioning of the cables, the sensors (end of the road, detectors inductive, capacitive, optical cells, etc...)
- Realization of the programs automats
- Tests under tension and validation of the functions
|
|
|
|