|
|
2 types of enclosures are available, PLOMBIERES which is a monobloc enclosure and BLIGNY which allows to give the possibility to take out the back panel to make easier the wiring. These enclosures were designed to be able to receive customized mounting systems thanks to possibilities of steel and isolating modular distribution and accessories. The PLOMBIERES range is composed by 17 references with 7 different heights as the BLIGNY range has 20 references with 3 different heights.
These 2 ranges are completed by a wide range of accessories as the modular chassis, rails for brass terminals, depth adjustable brackets, vertical, width and depth profiles, ...
|
|
MODULAR ENCLOSURES FLEUREY
The FLEUREY enclosures have been designed as a complement of BLIGNY enclosures. They are welded made of sheet steel 15/10. The top and the base have been welded to the vertical pieces of the body giving more rigidity. The back and side panels are easy to install by quick fixing out. Enclosures FLEUREY have got 3 heights, 4 widths and 3 depths which is traduced in 33 types.
This range is completed by a wide range of accessories as the modular chassis, rails for brass terminals, depth adjustable brackets, vertical, width and depth profiles, ...
|
|
These enclosures are made of heat-moulded polyester, Ral 9002, with a very high mechanical resistance against impacts to allow an IK10.
The waterproof is ensured by a gasket in neoprene between the cover and the body. The high resistance against impacts allows an IK10.
This range is made by 14 references, 7 with blind doors and 7 with transparent doors.
There are 3 types of mounting plate : white self-extinguished polyester, solid and perforated steel mounting plate.
A full range of accessories is composed by (modular chassis, movely support for base plate, ventilation device, wall fastening lug, ...) with several types of locking and keys.
|
|
Thalassa enclosures
■ Polyester monobloc enclosures, reversible, plain or glazed door, IP66, integral top and bottom protective covers.
■ Extensive range of accessories, common to those of the Spacial 3D enclosure range.
root pillar enclosures
■ Polyester enclosures, IP 43, ventilated plain door, intregral canopy.
■ Extremely sturdy constuction with exceptional resistance to mechanical impact and deformation.
■ Polyester plinth option.
Thalassa floor standing enclosures
■ Polyester monobloc floor standing enclosures of modular design, combining 40 dimensions with 4 styles and 5 door configurations.
■ Extremely sturdy construction with exceptional resistance to mechanical impact and deformation.
■ All accessories required for the construction of automation systems, modular and 19" chassis, and for their equipment (internal door, base, plinth, canopy, step slides, horizontal chassis, etc.).
|
|
US9001CA1001E Cupboard of extension of autonomy for inverter US9001
1:00 with 8:00 of autonomy
Design similar to the US9001
1 cupboard and 10 modules batteries
Cupboard independent of the inverter
The cupboards can be put in parallel
Connection between the inverter and Battery Banks realized with cables of small section (2.5mm ²)
Modular
Hot Déconnectable for the replacement of the internal batteries
|
|
4.1 CONNECTION AND METERING SC – BLUE RATE CP SERIES
When power required is less than or equal to 36 KVA Essential for all companies that obtain their energy from a public network. Combines standardised metering with employee protection. Meets the French electricity board's requirements for provisional electrical connections.
|
|
4.2 CONNECTION AND METERING SC – YELLOW RATE CGO SERIES
When power required is higher than 36 KVA and less than or equal to 250 KVA
Essential for temporary power supplies on construction sites from a MV / LV 400V public distribution station.
Meets the French electricity board's requirements for provisional electrical connections.
|
|
AS SERIES
Control panels designed for larger construction sites. The ASI series is particularly well suited to industrial construction sites: 400V neutral-free three-phase network.
|
|
CR SERIES
Intended for secondary distribution on construction sites, for the different areas of the construction trade and for dispatching power to different floors of buildings being constructed or renovated.
|
|
- quality sheet steel, body 1.25-1.5 mm gauge (depending on model), door 1.5 mm gauge
- zinced mounting plate, 2.5 mm gauge
- surface protected by powder coating, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 140°/180° to the right, DIN compliant
- available in many sizes, pre-configured ready for use
- sash fastener 3 mm double bit (bar lock for 1200 mm or taller models), can be exchanged for any other common lock system
- zinced mounting plate provides basic EMV protection
- cable entry through sheet steel bottom gland plate
- rail systems, glazed doors, wall mounting lugs, locking systems and other accessories available as listed in Accessories for Wall Mounted Enclosures or on request
- Wall Mounted Enclosures also available in stainless steel
|
|
Safety enclosures for explosive environments are meant to
be used in areas with explosion risk 1, 2, 21 and 22 gaz « G »
and dust « D » according to 94/9/CE directive.
They ensure emergency stop, load break for electrical
maintenance and switch disconnection next to all low voltage
network.
|
|
|
Pepperl+Fuchs products are used throughout the world in applications involving industrial, hazardous and corrosive environments. By engineering a complete solution at our own facility, Pepperl+Fuchs is able to offer its world-class products in a variety of panels and enclosures designed and built according to your specifications.
|
|
Junction boxes are intended for a special - typically swiss - installation technique. It consists in establishing branchings from laid through conductors. The involved material are a baseplate fitted with branching terminals and a cover.
Further junction boxes of thermoplastic, polyester or thermosetting material are available for the same type of application.
|
|
|
|
|
|
The CEFEM steel SAFEBLOC switch Disconnector is a cut-off and lock device. It complies with standards and regulations to ensure the safety of operators in industry, where the risk is permanent.
The SAFEBLOC enclosure includes a position indicator (ON / OFF or I / O) for a better guarantee of safety.
The cut-off system is clearly visible to the operator and is maintained whatever the circumstances.
These boxes can be installed on machines or close to each engine.
The security features are multiple:
The switch contacts are visible when the switch is open, the mechanical indicator allows to view at one glance the position of the switch, double lock prohibits to open the door when switch is ON and the closure of the switch when the door is open, the handle is lockable by 3 padlocks on ON position.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
In all heavy process industries: cement, mines, quarries, Steel, Paper, Sugar, Glass industry…
|
|
|
|
|
|
CHARACTERISTICS
Switche disconnectors :
IM from 40 to 500 A with right lateral handle and
visible cut-off.
Handle :
Lateral, isolated, red, lockable with 3 padlocks in
« open » position, can not be unfixed from the outside
of enclosure.
Connexions :
Up/Down or Down/Down connection with pre-cabling
of uper terminals using connecting bars starting from
160 A.
Double door interlock :
impossible to open the door when switch is « ON » and
impossible to shut the switch when door is open.
Visible cut-off :
through transparent polycarbonate lid.
Locking :
using isolating screws for locking of the lid, equipped
with hinges. (other lock on request).
Enclosure :
• box with 3 mm thick polyester fibre-glass reinforced,
Colour RAL 7035
• door made in auto-extinguishible transparent
polycarbonate, with no halegen, implemented with
internal hinges, 180° opening on left hand side,
• overall protection :
IP 55 with air vent.
IP 65 on request.
• auto-extinguishible material according to IEC 695
2-1 standards ; fire-proof according to UL94HB.
• temperature resistant : - 35° à + 120°C.
• IK10 shock resistant : 20 joules.
• 4 wall fixations.
Earth connexion :
using 2 earth connections inside the box.
|
|
|
|
|
|
The CEFEM dust SAFEBLOC ATEX is a cut-off and lock device intended to be used in areas with risk of explosion: zone 21 and 22, for dust "D", according to the EU directive 94/9/EC.
It complies with standards and regulations to ensure the safety of operators involved in the emergency break, the break for mechanical maintenance and the safety break beside any low-voltage circuit terminal.
They are composed of an IM switch disconnector, with a visible cut off, controlled by a right side handle, lockable by three padlocks on OFF position.
A position indicator (ON / OFF or I / O) allows you to view at one glance the position of the switch.
The cut-off system is clearly visible to the operator through a glass window triplex.
These 2mm thick boxes steel are very robust.
A double lock prohibits the opening of the door when the switch is ON and the closure of the switch when the door is open.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
All industries dust ATEX: zone 21 or 22
Cement, Mining, Quarrying, Steel, Paper, and Sugar.
|
|
- Control housings from aluminum
- Support arm systems
- Control housings from steel sheet with the series "BAE" and "BAV"
|
|
|
|
|
|
Terminal boxes of all sizes and design types provide high dust and water ingress protection at and around cable clamps and other connections. Access protection is designed to ensure electrical and mechanical safety as mandated by the VDE. Terminal boxes are particularly well suited to house small PLCs, so-called intelligent terminal blocks or bus blocks.
- sheet steel housing, powder coated RAL 7032 structure
- narrow chamfer on the body, robust drip rail design
- good overall accessability
- extensive range of accessories
- optional hinged covers with sash fasteners
- foamed PU cover gasket
- foamed PU door gasket / high protection class (>IP 65, EN 60529)
- captive cover screws in plastic sockets
- precise contact pressure due to fixed tap hole depth
- removable cage nuts allow for good accessibility of drillings for wall mounting (even in fully fitted enclosures)
- pre-punched back plane knockouts with blanking plugs
- mounting plate rests on embossed portion when interior profiles are removed
(i.e. clearance is kept for rivet heads)
- removable yellow chromated interior profiles (no doubling of material), variable mounting depth through profile extensions or use of spacer bolts
- zinced support rail or mounting plate makes conductive contact upon installation (excellent conductivity due to copper-plated threaded weld studs)
- also available in stainless steel
|
|
|
|
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs.
|
|
The lid stay of the one-piece consoles is locked against unintentional closure.
Maximum space for cable entry with divided gland plates.
The mounting plate is height-adjustable by 2 x 40 mm, e.g. with deep installed equipment in the lid or cable entry from the rear.
Material / Surface finish
Material:
Stainless steel 1.4301
Enclosure: 1.5 mm
Door or double door and console lid: 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure, door and console lid: Brushed, grain 120
Mounting plate: Zinc-plated
Supply includes
Enclosure, solid rear and sides, door or double door at the front, with locking rod, console lid with lid stay and stainless steel cam latched in the enclosure, two-piece gland plate, mounting plate, zinc-plated, passivated.
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
-Hinged latch cover
1. Stainless steel hinge&latch type keeps water proof rating even though opening the cover frequently.
2. Changeable hinge&latch size or addable hinges&latches according to box size in order to keep more strong water proof rating
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 81 kinds sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Optional for modifying all latches instead of hinges
7. Available stainless steel wall mounting bracket
|
|
|
At the time of delivering the goods, the Draw Latch-Hinge and Particular Locking Device are equipped and its opening-closing is made simple, and it is a cabinet shape product. The delivery-time of our products is promptly made from our own factory with low price and the diverse sizes also the accessories which make the consumer's satisfaction. HIBOX has a various kinds of control boxes. The dimension is from 200X300X150 mm to 500X400X200 mm or 400x 600x 230 mm. All of the products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
COMMAND BOXES – INDUSTRIAL CONTAINERS
To choose an appropriate container is a crucial phase in the development of a project. It is necessary to proceed with systematic investigation, methodical assessment and application variables: where are we going to install our equipment? In what environmental conditions? What level of protection must we have? How much space is available? How should it be arranged? By working out this information we can define the most suitable product and meet the demands of the project. New Elfin produces a vast range of containers:
- aluminium: 70x118 up to 400x400
- stainless steel: 82x82 up to 230x26
- thermoplastic: 50x52 up to 254x361
- polyester: 250x300 up to 500x600
|
|
|
Housed in tough ABS boxes and panels these IEC EN60320 Distribution Units have combinations of four, five or six outlets together with neon indicator, fuse and switch options. The three sizes are available in various combinations and, other than the compact version, all have shuttered outlets. The larger enclosed versions are also available with EMI filtering.
|
|
Meets a large numbres of installation needs in industrial and similar premises. With a modern and attractive design it blends well into any seetting.
In version IP66, the DOMINO Systems offers a complete range of consumer units and sealed mounted enclosures for distribution assemblies. They are extremely flexible in the ways they can be used and may also be englarged
|
|
|
|
|
|
This chapter illustrates the technical characteristics of FM enclosures for distribution
boards and of ILME industrial socket-outlets for which these enclosures are
designed.
It is possible to use SQ interlocked socket-outlets for industrial use (with or without
protection devices), simple flush-mounting Pluso socket-outlets (without interlock)
and compartments for modular units.
These components enable to configure a wide range of distribution boards, both
mass-produced (AS) and custom-made (ANS), suitable to meet all possible installation
needs.
FM enclosures for distribution boards offer tested reliability and can be used, in combination
with FM socket-outlets for industrial use, as integrated modular systems to
configure distribution boards for industrial socket-outlets. Distribution boards with
ILME enclosures and socket-outlets can be installed in:
- Industrial applications
- Services applications (commercial, exhibitions, etc.)
- Agricultural and livestock breeding applications
- Residential and similar applications (i.e. common areas of condominiums, cellars,
garages, community buildings, kitchens, etc.).
|
|
IP67-IP55 ENCLOSURES FOR SOCKETS AND AUTOMATICS SWITCHES
PRYMA Enclosures for sockets and automatic switches are provided plain or equipped with sockets and wiring, in any combination and without minimum order quantities required.
They are sealable, UV protected on windows and also completed with fastening and turning hinges with a locking device to assure their watertightness.
They are made from halogen free long-lasting plastic material. DIN rail can be fixed to the frame, and also, to the base without the need of screws. Holders are included on the enclosure to fix mounting plates and they are ready for earth and neutral bar installation. Cable entries are adapted to the metric system and sockets wiring is carried out under electrical engineering preceptives.
|
|
|
All of DSE HIBOX products are Water-proof and Dust-free. (IP 66-67, NEMA 4X) HIBOX received UL 5VA. That means HI-BOX products have been perfected to the highest commercial standards through reinforcement of the box's thickness by more than 30% over existing plastic electic enclosures. The enclosures dimension start from 50X65X55 to 600X800X280 mm and DSE have 400 kinds of enclosures-! Refer to the gereral catalogue of HIBOX in Direct-Industry or www.dsehibox.com
|
|
DISTRIBUTION ENCLOSURES
ECOLOGY series of distribution enclosures can be sealed and they are provided with opaque or transparent (UV protected) reversible windows. They are made from halogen free longlasting plastic material and equipped with dust caps for wall mounting screws and 1/4 quick locking unloosable screws.
They have supports for mounting plates fixing, they are prepared for installation of earth and neutral bars and cable entries are adapted to the metric system. On the 26 and 57 modules versions DIN rail can be adjusted on its height.
|
|
|
|
