|
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist – however particular the task in hand.
|
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist – however particular the task in hand.
|
|
All of DSE HIBOX products are Water-proof and Dust-free. (IP 66-67, NEMA 4X) HIBOX received UL 5VA. That means HI-BOX products have been perfected to the highest commercial standards through reinforcement of the box's thickness by more than 30% over existing plastic electic enclosures.
DSE Electronic Box has been developed to protect electrical and electronic components in wet, dusty, and hazardous environments.
|
|
Under ATEX, the requirements placed on EX enclosures for use
in explosion hazard atmospheres are high.
For this reason, Rittal refuses to compromise in this area. Enclosure concepts proven a million times over are tailored to the specific Ex requirements.
The results is a series of empty enclosures providing ideal conditions for applications in the chemicals
and petrochemicals industries, in the offshore sector
and in the foods industry.
|
|
|
|
|
|
Our product range contains a wide variety of enclosures which offer a selection of sizes, designs and materials. It is designed for single installations as well as for large distribution units. The dimensions of the enclosures are so designed that they can be combined into a large modular unit. A large number of components, such as contactors, switches, instruments and PLCs can be built into these enclosures. Naturally, customer-supplied equipment layout is designed by us to customer's requirements. Cable entry is either direct (cable glands or conduit entries) or indirect via en EEx e housing (stud-type or conductor bushings).
The design and installation of explosion-protected distribution and control boards having flameproof enclosures require considerable experience and careful consideration of relevant regulations in relation to the application data. Only thus are technically and economically satisfactory solutions, which combine a user-friendly design with a high degree of safety, possible. In addition to Ex-regulations, the general regulations must all be bserved in the assembly of distribution and control boards.
Standard industrial electrical equipment can be bult into enclosures. It is, however, subject to a "type test" by a recognised testing station. R. STAHL has such certificates issued by PTB permitting the assembly of explosion-protected systems for all standard applications.
|
|
4B INLINE JUNCTION BOX
- For use in Atex zone 20& 21
- Tough moulded nylon body
- Accepts 5 x 2,5mm2 cable cores
- Threaded to take standard M25 glands
|
|
Junction boxes are used for carrying and distributing electrical power in hazardous areas. They are supplied in different sizes with and without small equipment fuse, and are therefore suitable not only as pure connection and distribution boxes, but also for protecting electrical loads up to 6,3 A. Cable glands in plastic are used as standard cable entries. Bell-mouthed or metal glands can be fitted if ordered. The metal cable entries are connected to the earthing system via brass plates.
Explosion protection to CENELEC, IEC
For use in Zone 1 and Zone 2, Zone 21 and Zone 22
Enclosure in glass fibre reinforced polyester resin
Degree of protection IP 66
|
|
-Placing keypad or logo sticker on screw cover type
1. It can be placed keypad or logo sticker on the cover.
2. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
3. Available 18 kinds sizes from 80x130x35 mm to 180x255x125 mm
4. selectable gray cover or clear cover
5. Available stainless steel wall mounting bracket
|
|
WISKA COMBI. The Bellied box.
The junction boxes with the distinctive 'bellied' lid provides the utmost in visual and functional perfection.
|
|
Helio Box junction boxes for protecting photovoltaic installations are designed to protect between 4 and 12 strings in parallel.
These junction boxes are IP55 according to the IEC 60529 Standard. They are fitted with Helio Fuse dedicated to blow under the vvery low fault currents encountered in such applications. Helio Fuses are hold in fuse-disconnector. Surge Trap® protecting against overvoltages fit also the Helio Box.
|
|
Beautiful appearance, excellent processing and stability should be guaranteed by material such as High Intensity ABS, PC, AC, and Polyester assured, Flammibility material and Glass 30% annexing material. The products was recognized by the Public Trust International Mark Germany VDE, TUV European Community CE and USA Underwiters Laboratories. The use is convinient for the installation of Terminal Box, the supply Swithchboard, Apparatus Box, electrical power supply and Control Box etc.
HIBOX has a various kinds of terminal box. The dimension is from 190x190x130 to 380x560x180mm. Also these boxes can be customized by cutomer's order. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
The one-piece desk is used in simpler applications but still offers an up-to-date technical specification.
These styles have bottom entry gland plates with an adjustable, removable section and an adjustable mounting plate.
Accessories are common to the three styles. The shelf lid of LE-ME and SBA are supplied with gas springs.
The design concept of the PE console allows the installation of racks or monitors and a supplementary casing can be fitted up to the back to increase the usable depth to 500mm.
The cabinet desks are manufactured from pressbent and welded 1.5mm and 2mm sheet steel.
The ZBA control desk range has been manufactured in parallel to the SBA range to meet simpler applications.
|
|
Simplify your next operator interface project with a STRONGARM mounting and enclosure combination.
Enclosures are designed to your exact terminal specifications; including the cut-out, cable space, drive access and cooling requirements. Specify pushbutton cut-outs and other extras to complete the ideal, hassle-free enclosure to complement your STRONGARM mounting. Enclosures are specially reinforced for pendant arm mounting to assure solid, wobble-free operation.
Features:
• Operator "friendly" interface
• Compact and repositionable including three levels of vertical travel (13", 23", 30")
• Internal, local, or remote PC (Internal MicroBox PCs available from STRONGARM)
• Multiple keyboard and pointer selections (including STRONGARM's revolutionary Stainless Steel Mouse)
• Feature panel for easy pushbutton additions
• Post Mount, Machine Top Mount, Wall Mount and Ceiling Mount available
• Horizontal and vertical extension capabilities
|
|
Desktop housings are available in different sizes and types. They offer designer aesthetics for interior applications.
Your advantages:
- Generously dimensioned, comfortable control and interface panels.
- Ergonomic shape.
- The PCBs can be fitted on both sides with interfaces that project beyond the actual width of the case.
- Non-slip pads for secure table top applications.
- Easy mounting.
- Comprehensive range of accessories.
|
|
The comprehensive range of boxes for potting electronic assemblies. With special cost advantages for series-type production.
Potted assemblies are protected from shock as well as temperature, dampness and chemical influences. The versions made of Duroplast are not highly resistant to fracture.
|
|
-Molded hinge type&latch type
1. Molded hinge&latch design is easy to separate the cover from the base for printing or processing holes&cutting.
2. It protects inner components from dirt, dust, oil, water by roof guard on top&cover gasket.
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 46 kind sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Available stainless steel wall mounting bracket
|
|
|
The FAMI polypropylene stacking and storage containers have been designed and produced to offer companies rational solutions to their various material storage and handling requirements. First class raw materials, together with detailed structural research are the basis for this top quality product. The wide range of containers is available in five colours to allow the storage of materials in easily recognisable categories.
|
|
Turret to passing for distribution electric power complementary and services (water, I telephone compressed air, connections of miscellaneous kind) adapts for installations in areas mercata them, historical center for irregular manifestations, inside of industries, workshops etc
Carrabile Chiusino 25.000kg
Optional: Carrabile Chiusino from 40.000kg
chiusino riempibile carrabile from 25.000 or 40.000Kg.
Max power distribution: the erogabile maximum power 40 KW trifase
|
|
PILOMAT@ ENERGY LONDON B6040
Loading class: 4000 kg.
Crown dimension: 600x430
Lock release: Versione cifrata con blocco automatico
Cover plate: Ghisa perlitica
Category Retractable Bollard - Retractable Bollards
|
|
This enclosure is NE-1515: The dimension is 150X150X90 mm.
We have enclosure from 50X65X55 and 80X82X60 mm
We have a various of this kinds of small plastic enclosures.
Just check them out at www.dsehibox.com
IP66-67, UL 5VA 4X type
-1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation
-Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests.
-Convenient to use for console-alternative rail and button box, mini terminal, signal box, gauge/meter console, communication connection box and etc.
Refer to the general catalogue of HIBOX on Direct-Industry.
|
|
The OKW small plastic enclosures covers many different fields of application.
OKW products are incomparable in design and, thanks to their high level of technical development, are the ideals solution for comfort-oriented case users who are looking for something special.
Our wide range of services allows us to find fast, cheap, individual solution for you.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
Protection degree is IP65 according to EN50298 NEMA for single door, IP55 for double door.
Four or six studs are welded inside the boxes (with the exception of 150mm depth enclosure), allowing the mounting of both an inner door, a modular chassis, a rack frame or the mounting plate adjustement system.
All the accessories are supplied separately so that to increase flexibility and optimizing finished products inventory.
|
|
St range of wall mounting enclosures is one of the highest quality metallic enclosures available on the market. A well engineered project, which has been continuously updated and improved, has allowed the creation of a wide range of possible variations.
The actual ST range includes the following versions:
- 32 sizes manufactured from Fe40 sheet steel with blank door
- 19 sizes with glazed doors
in both single and double door versions.
ST range main characteristic is solidity obtained thanks to the considerable thickness of the sheet steel to the high technology and automation used for products and to the proper mix of the components.
|
|
|
Electric steel boxes, with reversible frontal door and basic panel 20/10, meeting the standard INTO 60439-1, protection IP 55, also provided with transparent door and screen-door, dimensions of 300x200x150mm with 1200x800x300mm
|
|
PILOMAT ENERGY and PILOMAT LONDON:
are ideal to be used with the utmost safety and efficiency
both in indoor and outdoor environments, for
example: markets, squares, areas used for entertainment
events, sports centres, shopping centres, trade
fair pavilions, conference halls, etc. The bollards are
activated by a key-operated control and subsequently
raised automatically via a gas operated actuator.
PILOMAT ENERGY: mobile retractable tower with
semi-automatic movement to deliver: electric power –
water – telephony – data transmission – compressed
air. The configuration can include up to 12 electric
power sockets.
PILOMAT LONDON mobile retractable structure
with semi-automatic movement to deliver: electric
power – water – telephony – data transmission – compressed
air. Enables utilities to be connected
and encloses the mobile structure.
|
|
The CC-4000 SL is a perfect addition to the existing Bernstein
control housing range CC-4000 thanks to its elegant, slim-line
profile.
This high quality dynamic housing will enhance the appearance
of any modern machine or system. Available with either 55 or
99mm external depths, the system profile can be tailored to
match the exact size of the control unit (HMI, IPC etc.).
Controllers can be mounted easily, economically and securely
thanks to the many excellent technical properties of CC-4000 SL.
|
|
|
A wide range made up of monobloc enclosures for wall or floor fitting, made in sheet steel painted with polyester resin or manufactured in stainless steel. Combinable modular enclosure systems, ideal for building up large frames and control desks.
|
|
Console system
Flexible console system, allows a versatile number of combinations to configure the system to your design. A range of 19" accessories adds further versatility. Available in both Mild and Stainless steel.
- MPC / MPCS, Console combination version, single or double door
- In mild steel and stainless steel
- MPG / MPGS, Console compact version, single or double door.
- In mild steel and stainless steel
|
|
|
|
