|
|
R. STAHL supplies explosion protected terminal boxes in various versions and sizes, as individual enclosures or as terminal box combinations, presented in ecnclosure series.
8118:
glass fibre-rinforced polyester resin, in 3 basic enclosure sizes
8146:
glass fibre-reinforced polyester resin, in 8 basic enclosure sizes and various heights
8125:
painted steel plate or stainless steel, in 6 basic enclosure sizes and various heights
Explosion protection to CENELEC, IEC, NEC
For use in Zone 1 and Zone 2
Terminals fitted to order
Cable entry mounting to order
Degree of protection IP 66
Specialised knowledge is required for designing and construction of explosion protected electrical engineering, it is vital to observe the explosion protection regulations. R. STAHL is experts in this subject! R. STAHL design and manufacture explosion protected terminals to order and to customer specifications taking into account all relevant regulations and standards.
|
|
As practised by automation engineers for some time, the trend in engineering and plant construction is strongly towards the supply of complete systems. Drawing on several decades of experience, INTERTEC does not have to reinvent the wheel for every new project. Access to an intelligent modular concept allows industrial quality at low costs.
SAFE LINK - A Convincing System
• Enormously reduced engineering costs
• Low material procurement costs
• Pre-installed hook-ups save time and costs at the site
• Sensible standardization reduces the variation in range of instrument installations and saves storage costs
• Field-proven and practice-proven solutions for traditional installations and innovative direct mounting
• High measuring accuracy resulting from short impulse lines
|
|
INTERTEC cabinets and shelters are designed as sandwich constructions with inner and outer skins made from very strong GRP skins - or other materials such as aluminium sheet or stainless steel - and a core of closed cell light weight and insulating PU foam. This construction ensures high strength and rigidity and is unaffected by environmental influences.
The design spectrum covers nearly every application case, from an insulated cable distribution cabinet through Analyser House or Radar Equipment Shelter to a complete - even multi-storey - utility building with attached office. Whether in aggressive industrial atmosphere or extreme environmental conditions of the arctic or the desert - there are nearly no limits.
|
|
Thanks to their versatility and the comprehensive range of accessories, these robust, attractive enclosures can be used for a wide range of applications.
With its eye-catching visual design, which includes seals as a design element, it makes any electronic components look good.
ALUBOS enclosures are available with profiles which are closed, divided horizontally, and open on one side.
The lengths of all profile types are so variable that the result is a universal, ergonomic, individual hand-held enclosure in your special design.
Ingress protection up to IP 65, the high mechanical loading capacity of the profile and good EMC screening ensure a high level of protective functions even in the standard design.
|
|
This highly adaptable ABS hand-held enclosure system is available in grey or black, depending on the design.
Each enclosure type provides different equipment features and accessories, so making it easy to find the ideal enclosure for use with a wide range of mobile data collection and processing applications.
|
|
- Resistant to high-pressure cleaning
(protection category IP 69K). The seal lies between two surfaces and is ideally compressed by the screw fastening
- Suitable for clean room use.
Optional screw fastening to comply with high standards in the food and hygiene sectors:
external with hex screws,
internal with plastic stoppers.
- Optimum EMC conditions.
The labyrinthe seal achieves a particularly high level of RF shielding of the enclosure.
- Accessibility.
Internal rear panel bracket. This solution is clearly superior to external hinges from a hygiene point of view.
- Wall mounting can be implemented directly from the rear using M8 pull-in nuts, or from the front using wall mounting brackets.
|
|
Areta Multiple doors
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating.
Areta modular
Using the structure of a standard Areta cabinet it is possible to create modular internal systems for the LV Power distribution.
Specific mounting kits allow the fitting out of:
- Inner front with panels or doors including locking system with no extractable screw.
- Split cubicles adjustable in depth according to the different dimension of the devices to be installed.
The Areta modularity together with a special union system make possible the joining of different modules.
|
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating.
|
|
Aisi 304 EN-14301 stainless steel cabinet. Strongly built and designed for outside use. Manufacture in monobloc with embedded door, handle operated with officially approved seal.
Its design, finish, degree of protection specially suitable for urban use, street lighting all kinds, for electrical and electronic equipment telecommunications (ICT, TV, RDSI, RT, TB, TLCA,...). Complies with all current legal requirements.
Its monobloc manufacture allows for IP65 protection and a maximum resistance of IK10. certificate NEMA 4x, by UL.
Self ventilating protective roof attached with optional plinth, high resistance in embedded doors and vandal proof.
Includes galvanised mounting plate.
Follows EC regulations.
Special solutions:
Plinths for any size allowing cabinet to be raised 100 to 200 mm. from floor level and so providing extra space for cables.
Manufactured in Aisi 316 EN-14401 stainless steel
Controlled maximum door aperture
Bolts for fixing to floor
Anti-graffiti treated
Top EMC electromagnetic protection between frame and contact surfaces, guaranteed perfect electrical connection. EEC regulation 89/336.
|
|
With our outdoor enclosures we construct cabinet systems, which have been weather tested and are extremely stable. The electronic components used outdoors are optimally protected from wind, rain, heat, cold and vandalism.
Schroff offer two standardised outdoor cabinets: "Modular" or "Unibody". Flexible assembly possibilities are possible with 19"" technology, ETSI or other non-standard accessories. With the EMC version, rubber seals or foam seals, which are combined with a metallic mesh, provide protection to IP55 which can be guaranteed. The seals can be replaced if they are damaged.
The cabinets conform to the guide lines and standards for shock and vibration and are tested to IEC 68-2-6 and -27, plus ETS 300 019 for safety during earthquakes. Climate control is tested to IEC 68-2-1, -2, -14.
|
|
Aisi 304 EN-14301 stainless steel cabinet for street lighting. Strongly built and designed for outside use. Manufacture in monobloc with embedded door, handle operated with officially approved seal.
• Its design, finish, degree of protection specially suitable for urban use, street lighting all kinds, for electrical and electronic equipment telecommunications (ICT, TV, RDSI, RT, TB, TLCA,...). Complies with all current legal requirements.
• Its monobloc manufacture allows for IP65 protection and a maximum resistance of IK10. Self ventilating protective roof attached with optional plinth, high resistance in embedded doors and vandal proof.
• Includes galvanised mounting plate.
Follows EC regulations.
Special solutions:
• Plinths for any size allowing cabinet to be raised 100 to 200 mm. from floor level and so providing extra space for cables.
• Manufactured in Aisi 316 EN-14401 stainless steel
• Controlled maximum door aperture
• Bolts for fixing to floor
• Anti-graffiti treated
• Top EMC electromagnetic protection between frame and contact surfaces, guaranteed perfect electrical connection. EEC regulation 89/336.
|
|
Uniplast range: The answer to your needs for a permament and safer protection of your electrical or electronic systems
Insulating, compact or modular system of enclosures that permits the construction of many different con·gurations, from a plain door to a transparent door, a single or double door and multi-compartment switchboard, effective even under the most severe working conditions.
It complies with the principal of "double insulation", which guarantees the maximum safety to the operating personnel.
The high quality of the material chosen for the construction of these enclosures is tested according to UL norm UL746C§26 "Ultraviolet Light Exposure".
Practice tests in a moderated climate have shown that the polyester enclosures are resistant against outdoor use and aggressive chemical environments for at least 20 years without loosing the quality of the enclosure.
|
|
|
The range of moulded endosures is made up of a wide selection of products such as modular boxes, wall fixed cabinets adapted to special applications for buildings, floor fixed for industrial facilities, electrical distribution, public lighting, etc.
|
|
The new DIN enclosures IDG-B6 and IDG-B9 arefullv insulated and fulfill the requirements of the machinery and car industry.
The enclosures have the installation width of 105 mm for the IDG-B6 and 157 mm for the IDG-B9. They are designed for easy snap-in assembly on DIN-rails.
Three different versions of the housing cover allow customer specific solutions- There can be used commercial terminals from different suppliers or for matea-ble solutions with terminal plugs the according PCB headers from different suppliers with the according terminal plug headers.For solutions with connectors or terminals on the front side there is a fully closed version available.
The transparent front cover protects displays, Potentiometers or other contol devices on the front side against disadjustment or damages.
Features:
2 installation widths:
IDG-B6:105.0 mm, max. 36 terminals IDG-B9:157.0 mm, max. 52 terminals
Overall dimensions per DIN 43 880, size 1
Mountableto DIN rails per DIN 46 277 und DIN EN 50 022
Various termination options: 5.0/5.08 mm terminal blocks 5.0/5.08 mm; pluggable terminal block; Choice of connector on front cover.
Transparent front cover protects displays and control devices
DIN rail clip pre-assemled on housing base
Choice of colors and custom design available upon request (pending min. volume)
2 smaller installation widths are also available: IDG-B2: 35 mm; IDG-B4: 70 mm
|
|
Smart cabinets with a single front door in finely polished Aisi 304 EN-1.4301 stainless steel.
Its monobloc manufacture allows protection up to IP66 with a maximum resistance of IK10 complying with EN-60529 and EN-50102 standards and Nema 4x by UL. A drainage channel prevents any liquid contact with the polyurethene joint or hidden hinges.
Complies with all EC regulations.
Consoles
Elegant, functional consoles manufactured in finely polished
Aisi 304 EN-14301 stainless steel, easily accessed whose design allows for an IP55 protection and maximum resistance of IK10.
Upper door with shock absorbers which makes opening easier, with open bottom and hidden hinges.
It comes with a galvanised mounting plate
Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for use both inside and outside, due to the advantages of high resistance to chemical agents and durability.
delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
All models in stock for immediate delivery.
Special solutions:
Custom built to order.
Plinths (page 19).
Metal legs.
Polycarbonate window door.
Manufactured in Aisi 316 EN-14401 stainless steel.
Bakelite isolated or stainless steel mounting plate.
Superior EMC electromagnetic protection between frame and contact surfaces which guarantees a perfect electrical connection. EEC regulation 89/336.
|
|
|
Stainless steel enclosures are suitable for many environments, such as the chemical, food, pharmaceutical and oil industries. Being one of the fi rst on the market with stainless steel enclosures. Eldon have a long history and experience with this kind of product.
|
|
The compact terminal enclosure
The CombiNorm-Control was designed to hold double-pole PCB connection terminals, and two of its advantages are its compactness and versatility.
The CombiNorm-Control enclosure is supplied in three widths and, depending on the design, can hold up to 16 double-pole terminals. Terminal sockets which are not required can be closed by the use of covers.
Accessories include light guides and adjustment axes for coding switches.
|
|
Stainless steel type Wall Mounted Enclosures, Floor Standing and Suite Enclosures, Desk Consoles, Terminal Boxes, Command Panels and special enclosure models are used in harsh environments or hygienic applications, e.g. in the chemical industry or the food and beverage sector. Their technical properties (high IP class and special EEx design, where applicable) ensure full protection even under extreme conditions (low temperatures, high humidity). Selected accessories complement this range to enable conclusive enclosure solutions.
Stainless Steel Wall Mounted Enclosures, Standard:
- enclosure and door made of 1.5/1.25 mm gauge stainless sheet steel material no. 1.4301
- enclosure fully self-contained
- door fitted with double chamfer along all edges for increased stability
- concealed hinges
- door opens ca. 147°
- door fitted with 4 M6 fastening bolts
- rubber profile along all edges (IP 65 compliant, EN 60529)
- sash fasteners with 3 mm double bit insert
- 2.5 mm sheet steel mounting plate, screwed to fitting profiles
- earthing for enclosure, door, and mounting plate
- 4 drillings in the enclosure's back plane (fitted with plastic blanking plugs) suitable for wall mounting lugs or to be used for direct wall mounting
- outside surface smoothed
|
|
With its ALUBOX series Scame is offering a range of metal products sure to satisfy specific installation requirements in situations that demand a robust product.
With its excellent mechanical resistance and the strength to counter climatic and environmental stresses, the ALUBOX series is particularly well suited to environments that are harsh because of the kind of work carried out there - heavy industry installations, installation right beside a machine, for industrial automation, on board ships, for thermal, chemical and petrol chemical plants - even outside.
The ALUBOX series aluminium junction boxes are suitable for using in environments of major fire risk (CEI 64/8 part 7) and in AD-FT installations according to the specifications of the CEI 64-2 norm.
|
|
Key Features:
- Seamless Deep Drawn Construction
- Numerous Trim Heights Available per Housing
- Various Alloys and Tempers Available
- Short Lead Times on Standard Products
- Numerous In-house Capabilities to Modify Your Housing
- Great for Prototyping
- Three Standard Nutplate Configurations Available on Select Housings
ZERO Manufacturing, Inc. is the premier manufacturer of deep drawn aluminum enclosures. Available in over 32,000 pre-tooled sizes. For seamless, draft-free construction in aluminum enclosures look to ZERO.
It all starts with a single sheet of metal. ZERO uses only the highest quality aerospace aluminum alloys. Although we most often recommend aluminum as a durable medium, we also provide deep drawn Products in brass, copper, cold-rolled steel and mu-metal (in select sizes).
Standard lead time is 6-8 business days for all stock items.
Standard lead time is 12-14 business days for all non-stock items.
All non-stock items incur applicable set-up fees.
|
|
AUTOMELEC proposes a complete pallet of services for the realization of boxes of electronics and automatism.
These services can go from the design until the realization of the tests:
- Analysis of the needs
- Choice of the components and establishment of the nomenclature
- Provisioning of the components constitutive of the box: wrap mechanical, components of automatism (driving disconnecting switches, protections, departures, relay and contactors, relays of safety, automats programmable, variable speed transmission, connecting terminals, etc...)
- Realization of the electric file with a producing software of CAM of the plans to the format dxf or dwg compatible with all the software of CAM
- Realization of the box installation of and machining
- Wiring in the respect of the standards and according to the specific rules of the customer (color of wire according to tension, type of connecting terminals, etc...)
- Classification and reference mark of all wire
- Realization of the beam of cables external with choice and provisioning of the cables, the sensors (end of the road, detectors inductive, capacitive, optical cells, etc...)
- Realization of the programs automats
- Tests under tension and validation of the functions
|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
FLUSH MOUNTING ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*PREMARKED MODULE COVERS, INTEGRATED ON THE FRAME.
*FRAME SEPARATED FROM DIN RAIL FOR CABLE CONNECTION AND INSTALLATION AFTER PAINTING.
*TRANSPARENT DOOR WITH LOCKING DEVICE ON OPENING.
*ENCLOSURES WITH MULTIPLE HORIZONTAL AND VERTICAL MODULAR COMBINATIONS BY MEANS TO ITEM GR11028.
*MARKED CE
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
SURFACE ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*REMOVABLE FLANGE TO SIMPLY SWITCH HOUSING AND WORK INSIDE THE DISTRIBUTION BOX.
*THE FLANGE ON THE INNER SIDE, NOT VISIBLE FROM THE OUTSIDE, IS PRE -CUT FOR ALL STANDARD TUBE AND CABLE-TRAY DIMENSION.
*THE DIN PROFILE FOR HOUSING THE SWITCHES IS HIGHER OFF THE BOTTOM TO PERMIT ALL TYPES OF WIRING WITHOUT ANY SPACE PROBLEMS.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*IN COMPLIANCE WITH CEI 23-48 -I ED.1995 PRODUCTS MEETING ESSENTIAL REQUIREMENTS OF L.V.D. 73/23/EEC AND FURTHER AMMENDMENTS ( IEC 760 2 ED 1989, AM 1/1994 AND MODIFICATIONS PR. EN60670 )
*MARKED CE AND IMQ.
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
|
|
|
A range of truly versatile MCB distribution board systems providing unobtrusive final circuit management solutions for applications up to 200A. The range offers robust TP&N and SP&N distribution boards with an extensive selection of MCBs, RCBOs, RCCBs, switch disconnectors, MCCBs, fuse switch incomers, service centres and modular control and command devices.
|
|
Deep Drawn aluminum enclosures are our specialty. Zero Manufacturing perfected the deep draw process, and now we have the largest range of tooling in the world. No matter what the required size and shape, ZERO can handle any deep drawn requirement.
The numerous advantages of deep drawn aluminum products are clear. ZERO uses only the highest grade aerospace aluminum throughout the deep drawing process; these light weight aluminum alloys, known for their strength, are also incredibly resistant to corrosion. Aluminum enclosures provide excellent resistance to breakage and fractures, and optimal protection against water and even salt damage.
In-house customization and modifications are available for all our aluminum products. For seamless, draft-free construction in aluminum enclosures, precision miniatures, or deep drawn cans look no further than ZERO for all your manufacturing needs.
|
|
Explosion-proof boxes
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
The robust junction boxes made of plastic stainless steel and light alloy are featured by their friendly mounting and installation capability and their design.
They are fitted with pillar terminals for cable of up to 6 mm2. The practical orientated housing form allows for a problem-free access to the connection
terminals for installation.
|
|
|
