|
|
|
|
|
|
Console enclosure delvalle
Elegant, functional consoles manufactured in finely polished Aisi 304 EN-14301 stainless steel, easily accessed, with a design which allows for IP55 protection and maximum resistance of IK10.
Upper door with shock absorbers which makes opening easier, with open bottom and hidden hinges.
It comes with a galvanised mounting plate.
• Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for use both inside and outside, due to the advantages of high resistance to chemical agents and durability.
• delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
• All models in stock for immediate delivery.
Special solutions:
• Custom built to order.
• Plinths (page 19).
• Metal legs.
• Polycarbonate window door.
• Manufactured in Aisi 316 EN-14401 stainless steel.
• Bakelite isolated or stainless steel mounting plate.
• Superior EMC electromagnetic protection between frame and contact surfaces which guarantees a perfect electrical connection. EEC regulation 89/336.
|
|
|
|
|
|
wall mounted stainless steel junction box, and Smart cabinets with a single front door in finely polished Aisi 304 EN-1.4301 stainless steel.
Its monobloc manufacture allows protection up to IP66 with a maximum resistance of IK10 complying with EN-60529 and EN-50102 standards and Nema 4x by UL. A drainage channel prevents any liquid contact with the polyurethene joint or hidden hinges.
Complies with all EC regulations.
• Specially designed for placing switches, machine controls, meters and other cases where a high quality and a high resistance are required while keeping an attractive appearance
• Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for both inside and outside use due to the advantages of its high resistance to chemical agents and its durability
• delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
• All models in stock for immedate delivery.
Special solutions:
• Built to individual requirements
• Stainless steel plinths
• Metal legs
• Window door
• Manufactured in Aisi 316 EN-14401 stainless steel
• Top quality electromagnetic EMC protection between frame and contact surfaces, guaranteeing a perfect electrical connection following EEC regulation 89/336.
|
|
|
|
|
|
ELECTRICAL CABINET AND BOX
Smart 1.5mm. stainless Monobloc IP66 single-door wall cabinet, with ample mounting space.
Its Monobloc design and seamless polyurethane joints provide IP66 protection and impact resistance IK10 in accordance with EN-60529 and EN-50102 standards. Channel flashing prevents liquids coming into contact with polyurethane joint and concealed hinges. Bolts included, 130º door opening. To open the doors a standard 5 mm double bit is fitted.
Built in compliance with CE regulations. UL Nema 4.12 and 13. compliant.
• Specially designed for applications where controllers, meters, heating, air conditioning, control systems are fitted.
• Standard Epoxy-Polyester Textured Ral 7032 or 7035 paint.
• delvalle can make any measurement to order on request , including holes, shaped channelling, both on the door and the housing, in addition to any other colour of paint required.
Special solutions:
• Customised to your measurements.
• Plinths
• Roof to protect from sun, rain, etc.
• Metal feet.
• Cable pass through lower cover.
• Transparent polycarbonate door.
• Manufactured in stainless steel AISI 304 or 316. EN 14401.
• Insulating mounting plate (Bakelite) or painted steel.
• EMC protection joint between the frame and the contact surfaces. Ensuring perfect electrical connection. CEE 89/336 standard.
|
|
Outdoor enclosure designed as a single monobloc piece for extreme conditions, can be used in solar, wind and other outdoor facilities with extreme wind, rain, dust and corrosion, stainless steel provides maximum durability when compared to other materials used to manufacture electrical enclosures.
We safeguard your electrical and electronic components longer, housing them in stainless steel enclosures, providing IP66 protection against dust and rain.
Available with self-ventilated or sealed roof.
Options:
• We can make any design to adapt to your installation
• Self-ventilated roof
• Supports for easy installation.
|
|
|
|
|
|
stainless steel control console enclosure
Elegant, functional consoles manufactured in finely polished Aisi 304 EN-14301 stainless steel, easily accessed, with a design which allows for IP55 protection and maximum resistance of IK10.
Upper door with shock absorbers which makes opening easier, with open bottom and hidden hinges.
It comes with a galvanised mounting plate.
• Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for use both inside and outside, due to the advantages of high resistance to chemical agents and durability.
• delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
• All models in stock for immediate delivery.
Special solutions:
• Custom built to order.
• Plinths (page 19).
• Metal legs.
• Polycarbonate window door.
• Manufactured in Aisi 316 EN-14401 stainless steel.
• Bakelite isolated or stainless steel mounting plate.
• Superior EMC electromagnetic protection between frame and contact surfaces which guarantees a perfect electrical connection. EEC regulation 89/336.
|
|
wall mounted stainless steel junction box delvalle, watertight boxes made wholly in finely polished
Aisi 304 EN-14301 stainless steel available in plain or bored cover (22.5). Specially designed for placing push-buttons.
IP65, IK10 levels of protection.
• Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for use both inside and outside, due to the advantages of high resistance to chemical agents and durability.
• delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
• All models in stock for immediate delivery.
Special features:
• Manufactured in Aisi 316 EN-14401 stainless steel.
• Custom built.
• Higher IP protection.
• Bakelite or stainless steel isolated mounting plate.
|
|
IP67-IP55 ENCLOSURES FOR SOCKETS AND AUTOMATICS SWITCHES
PRYMA Enclosures for sockets and automatic switches are provided plain or equipped with sockets and wiring, in any combination and without minimum order quantities required.
They are sealable, UV protected on windows and also completed with fastening and turning hinges with a locking device to assure their watertightness.
They are made from halogen free long-lasting plastic material. DIN rail can be fixed to the frame, and also, to the base without the need of screws. Holders are included on the enclosure to fix mounting plates and they are ready for earth and neutral bar installation. Cable entries are adapted to the metric system and sockets wiring is carried out under electrical engineering preceptives.
|
|
DISTRIBUTION ENCLOSURES
ECOLOGY series of distribution enclosures can be sealed and they are provided with opaque or transparent (UV protected) reversible windows. They are made from halogen free longlasting plastic material and equipped with dust caps for wall mounting screws and 1/4 quick locking unloosable screws.
They have supports for mounting plates fixing, they are prepared for installation of earth and neutral bars and cable entries are adapted to the metric system. On the 26 and 57 modules versions DIN rail can be adjusted on its height.
|
|
|
|
|
|
FLOOR STANDING CABINETS
The Floor-Standing Cabinets of the Argenta–Plus series comprise a set of industrial metal enclosures designed
to contain any type of electrical devices and equipment necessary for the supply, distribution and conversion
of electricity, and suitable for control and automation equipment for plants and machine tools.
This range of cabinets has been designed for maximum versatility, so that the installer can implement their
own arrangements depending on the needs of the installation. Functionality is high thanks to the various
possibilities for linking cabinets together, the possibility of installing any type of electrical devices, and the
complete range of accessories available for this series.
Intended for the most professional sector, the range is available in two versions: COMBINABLE, supplied
ready-assembled and COMPACT. Both are available in opaque-and transparent-door versions. They are made
from high-quality materials, in cold-rolled steel sheeting, achieving protection degree IP55, and a height of
up to 2 metres.
|
|
Proline
- Industrial cabinet with type of protection IP 55
- Welded steel frame
- Static load-carrying capacity 600 kg
- Also available as EMC version
eurorack
- Type of protection up to IP 40
- Static load-carrying capacity 400 kg
- Frame dividable
- EMC versions also available
minirack
- Type of protection up to IP 20
- Side with built in handle
- Static load-carrying capacity 200 kg
Cabinet control system s-guard
- Stand alone and flexible security system for remote control, control and message all safety values of climate and operation of networking devices
Socket strips
- socket strips: SCHUKO, UTE, IEC and US
|
|
The new CS compact enclosure is the ideal solution for applications where a larger wall mounting box than ETA "ST" range or a smaller free-standing cabinet than ETA "ATB8" range is requested.
Ergonomic design and solid construction are the key features of the CS enclosure, together with the possibility to fit standard ETA system accessories and a large cable entry opening.
This new product line will be offered in 6 single door sizes ranging from 600x1200x400 to 800x1400x400 and 6 double door sizes from 1000x1200x400 to 1200x1400x400.
|
|
|
|
|
|
IP65 WALL MOUNTING METAL CABINETS
The ARGENTA Series includes a group of metal enclosures used to house on the inside the electrical or
electronic switchgear, controlgear and equipment necessary to supply, distribute and electricity.
Mainly destined for industrial electrical installations as enclosures for measurement, transmission, signposting and control equipment or as enclosures for all the equipment necessary to coordinate the different electrical currents. The ARGENTA Series includes 41 standard models of metal enclosures, all of
which are manufactured in opaque door version.
The design and manufacture of this product line is sufficiently flexible so as to adapt to special executions
that require specific dimensions in agreement with user and installation requirements. Enclosures made
with high quality materials in cold-rolled steel plate of up to 2 mm thick and coated with RAL 7035
hardened epoxy-polyester paint.
This series is accompanied by a set of accessories that complete the scope of application of the product:
mounting plates, inner doors, canopies, elevation eyebolts, ventilation systems, etc.
|
|
The growing electromagnetic pollution and the European and international standards require electromagnetic shielding.
The European EMC 89/336 directive affects electric and electronic equipment which can create or be subject to electromagnetic disturbances.
Cabinets and empty enclosures in general do not directly generate any disturbance and are not ruled by the EMC directive.
In order to meet the directive and offer an effective product, Eta has developed a specific Areta cabinet suitable for EMC applications.
|
|
Safety enclosures for explosive environments are meant to
be used in areas with explosion risk 1, 2, 21 and 22 gaz « G »
and dust « D » according to 94/9/CE directive.
They ensure emergency stop, load break for electrical
maintenance and switch disconnection next to all low voltage
network.
|
|
4B INLINE JUNCTION BOX
- For use in Atex zone 20& 21
- Tough moulded nylon body
- Accepts 5 x 2,5mm2 cable cores
- Threaded to take standard M25 glands
|
|
|
Pepperl+Fuchs products are used throughout the world in applications involving industrial, hazardous and corrosive environments. By engineering a complete solution at our own facility, Pepperl+Fuchs is able to offer its world-class products in a variety of panels and enclosures designed and built according to your specifications.
|
|
WISKA COMBI. The Bellied box.
The junction boxes with the distinctive 'bellied' lid provides the utmost in visual and functional perfection.
|
|
METALLIC DISTRIBUTION SWITCHBOARDS
ATLANTIC Series of metal distribution cabinets have been developed and designed to fulfill an efficient and safe electrical installation where both, technical and aesthetic aspects are demanded.
Easy handling and improved working space are due to their flexibility and reduced number of fixing components, therefore these cabinets are an excellent tool for any type of low voltage-electrical installation.
They are available in different versions depending on use and installation requirements: Surface or flush-fit mounting, watertight enclosures...
This new line of products is well complemented with a serie of accessories providing to the installer versatility and integral solutions to their needs.
|
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating.
|
|
The one-piece desk is used in simpler applications but still offers an up-to-date technical specification.
These styles have bottom entry gland plates with an adjustable, removable section and an adjustable mounting plate.
Accessories are common to the three styles. The shelf lid of LE-ME and SBA are supplied with gas springs.
The design concept of the PE console allows the installation of racks or monitors and a supplementary casing can be fitted up to the back to increase the usable depth to 500mm.
The cabinet desks are manufactured from pressbent and welded 1.5mm and 2mm sheet steel.
The ZBA control desk range has been manufactured in parallel to the SBA range to meet simpler applications.
|
|
Simplify your next operator interface project with a STRONGARM mounting and enclosure combination.
Enclosures are designed to your exact terminal specifications; including the cut-out, cable space, drive access and cooling requirements. Specify pushbutton cut-outs and other extras to complete the ideal, hassle-free enclosure to complement your STRONGARM mounting. Enclosures are specially reinforced for pendant arm mounting to assure solid, wobble-free operation.
Features:
• Operator "friendly" interface
• Compact and repositionable including three levels of vertical travel (13", 23", 30")
• Internal, local, or remote PC (Internal MicroBox PCs available from STRONGARM)
• Multiple keyboard and pointer selections (including STRONGARM's revolutionary Stainless Steel Mouse)
• Feature panel for easy pushbutton additions
• Post Mount, Machine Top Mount, Wall Mount and Ceiling Mount available
• Horizontal and vertical extension capabilities
|
|
|
|
|
|
The CEFEM dust SAFEBLOC ATEX is a cut-off and lock device intended to be used in areas with risk of explosion: zone 21 and 22, for dust "D", according to the EU directive 94/9/EC.
It complies with standards and regulations to ensure the safety of operators involved in the emergency break, the break for mechanical maintenance and the safety break beside any low-voltage circuit terminal.
They are composed of an IM switch disconnector, with a visible cut off, controlled by a right side handle, lockable by three padlocks on OFF position.
A position indicator (ON / OFF or I / O) allows you to view at one glance the position of the switch.
The cut-off system is clearly visible to the operator through a glass window triplex.
These 2mm thick boxes steel are very robust.
A double lock prohibits the opening of the door when the switch is ON and the closure of the switch when the door is open.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
All industries dust ATEX: zone 21 or 22
Cement, Mining, Quarrying, Steel, Paper, and Sugar.
|
|
|
|
|
|
The CEFEM steel SAFEBLOC switch Disconnector is a cut-off and lock device. It complies with standards and regulations to ensure the safety of operators in industry, where the risk is permanent.
The SAFEBLOC enclosure includes a position indicator (ON / OFF or I / O) for a better guarantee of safety.
The cut-off system is clearly visible to the operator and is maintained whatever the circumstances.
These boxes can be installed on machines or close to each engine.
The security features are multiple:
The switch contacts are visible when the switch is open, the mechanical indicator allows to view at one glance the position of the switch, double lock prohibits to open the door when switch is ON and the closure of the switch when the door is open, the handle is lockable by 3 padlocks on ON position.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
In all heavy process industries: cement, mines, quarries, Steel, Paper, Sugar, Glass industry…
|
|
|
|
|
|
CHARACTERISTICS
Switche disconnectors :
IM from 40 to 500 A with right lateral handle and
visible cut-off.
Handle :
Lateral, isolated, red, lockable with 3 padlocks in
« open » position, can not be unfixed from the outside
of enclosure.
Connexions :
Up/Down or Down/Down connection with pre-cabling
of uper terminals using connecting bars starting from
160 A.
Double door interlock :
impossible to open the door when switch is « ON » and
impossible to shut the switch when door is open.
Visible cut-off :
through transparent polycarbonate lid.
Locking :
using isolating screws for locking of the lid, equipped
with hinges. (other lock on request).
Enclosure :
• box with 3 mm thick polyester fibre-glass reinforced,
Colour RAL 7035
• door made in auto-extinguishible transparent
polycarbonate, with no halegen, implemented with
internal hinges, 180° opening on left hand side,
• overall protection :
IP 55 with air vent.
IP 65 on request.
• auto-extinguishible material according to IEC 695
2-1 standards ; fire-proof according to UL94HB.
• temperature resistant : - 35° à + 120°C.
• IK10 shock resistant : 20 joules.
• 4 wall fixations.
Earth connexion :
using 2 earth connections inside the box.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
Protection degree is IP65 according to EN50298 NEMA for single door, IP55 for double door.
Four or six studs are welded inside the boxes (with the exception of 150mm depth enclosure), allowing the mounting of both an inner door, a modular chassis, a rack frame or the mounting plate adjustement system.
All the accessories are supplied separately so that to increase flexibility and optimizing finished products inventory.
|
|
St range of wall mounting enclosures is one of the highest quality metallic enclosures available on the market. A well engineered project, which has been continuously updated and improved, has allowed the creation of a wide range of possible variations.
The actual ST range includes the following versions:
- 32 sizes manufactured from Fe40 sheet steel with blank door
- 19 sizes with glazed doors
in both single and double door versions.
ST range main characteristic is solidity obtained thanks to the considerable thickness of the sheet steel to the high technology and automation used for products and to the proper mix of the components.
|
|
Junction boxes are intended for a special - typically swiss - installation technique. It consists in establishing branchings from laid through conductors. The involved material are a baseplate fitted with branching terminals and a cover.
Further junction boxes of thermoplastic, polyester or thermosetting material are available for the same type of application.
|
|
The CC-4000 SL is a perfect addition to the existing Bernstein
control housing range CC-4000 thanks to its elegant, slim-line
profile.
This high quality dynamic housing will enhance the appearance
of any modern machine or system. Available with either 55 or
99mm external depths, the system profile can be tailored to
match the exact size of the control unit (HMI, IPC etc.).
Controllers can be mounted easily, economically and securely
thanks to the many excellent technical properties of CC-4000 SL.
|
|
|
|
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs.
|
|
|
|