|
|
R. STAHL supplies explosion protected terminal boxes in various versions and sizes, as individual enclosures or as terminal box combinations, presented in ecnclosure series.
8118:
glass fibre-rinforced polyester resin, in 3 basic enclosure sizes
8146:
glass fibre-reinforced polyester resin, in 8 basic enclosure sizes and various heights
8125:
painted steel plate or stainless steel, in 6 basic enclosure sizes and various heights
Explosion protection to CENELEC, IEC, NEC
For use in Zone 1 and Zone 2
Terminals fitted to order
Cable entry mounting to order
Degree of protection IP 66
Specialised knowledge is required for designing and construction of explosion protected electrical engineering, it is vital to observe the explosion protection regulations. R. STAHL is experts in this subject! R. STAHL design and manufacture explosion protected terminals to order and to customer specifications taking into account all relevant regulations and standards.
|
|
|
|
|
|
Mobile enclosures are one of the main areas in the developement of new products at OKW. This makes it possible for us to present to you the whole variety of our system.
Depending on the type, the cases are already prepared for the use of standardised LCD and graphics displays, standard batteries and rechargeable batteries, PCMCIA cards, switches and membrane keyboards.
Mobility and ergonomics:
The working world is becoming increasingly mobile. We at OKW have made it our goal to offer you the cases to make this possible, with optimum user-friendliness and functionality. In the development of new solutions, therefore, design and product ergonomics are the main focus.
Design for people:
Attractive, high-quality, up to date. We use design-oriented case technology to create the basis for an increase in the value of your products.
Love to details:
- high-quality surface for the visual and tactile senses
- polished front surface for optimum efficiency level with infrared versions
- combination of different plastic material for improved touch sensation and protective function
- innovative technology
- the same aesthetic standards for cases and accessories for a harmonious whole
|
|
|
|
|
|
Modular design
The Bernstein light control housing CC-3000 is especially suitable for
mounting display components or control elements, (HMI's, IPC's etc). Its
height and width are variable up to a maximum recommended size of
approx. 600 x 600 mm. Various combinations of the 55, 120 and 200 mm
wide aluminium profiles give the housing several depth possibilities.
Customer-specific housing
The light control housings CC-3000 are supplied from the factory as standard housings or as custom-built versions. The modular concept is superbly suited for customer-specific solutions. The aluminium profiles are simply cut to length and assembled with the corner modules to create various sizes. The basic housing profile sizes can be combined with each other to achieve the required housing depth.
Besides the dimensions, many other housing properties are selectable in customer-specific configuration, e.g.: the hinged side of the door
the housing configuration for suspension systems the colour of the corner modules.
The front panel is also available ready for use: machined to customer's specifications, screen printed or engraved. A checklist helps to define the required housing configuration and at the same time serves
as an enquiry and order form.
|
|
A convex design to match the curves of the body is the characteristic feature of the ERGO-CASE range of cases.
As "bodycases" they for the first time make it possible for the user to wear the unit comfortably - whether on their arm, chest or waist.
The innovative design not only makes it easier to operate but also easier to read off.
|
|
Series D standard case
- plastic case constructed from
impact-resistant polystyrene, 3mm
- connected by snap locks; no screws
required
- easy assembly
Specifications
Application:
case for boards or small modules
Material:
polystyrene, 3mm
|
|
A practical range of PLUG CASES for many applications:
- country specific
- conforming to standard
- flame-resistant
- robust and impact-resistant
Simply an extremely functional solution for your electronics.
Live parts and socket versions in flame-resistant material PC/ABS (UL 94 V-0).
|
|
The comprehensive range of wall-mounting cases offers you a wide choice.
Application-specific orientation is typical for each family of cases
Your advantages:
- Ergonomic operating area.
- Practical for service personnel.
- Without/with separate terminal compartment.
- Robust construction.
- Modern design.
- comprehensive range of accessories.
|
|
-Lift off screw cover type
1. Available 2 plastic type of non-flush handle screw(indluded) or flush cross screw(optional)
2. Reinforced self-threaded design
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 48 kinds sizes from 50x65x45 mm to 380x560x180 mm
5. Selectable gray or clear cover
6. Available stainless steel wall mounting bracket
|
|
The product weighs approximately 1/4 the weight of an iron box and can be easily installed or moved. The product is free from corrosion, carries superior insulation.
The product has passed waterproof and dustproof tests carried out under rigid quality standards. ( IP 66 -67)
The use is also convenient for the installation of Terminal Substitution Rail, Button Box, Small Terminal, Signal, Relay and Sensor, Communication and Joint Box etc.
Refer to our E-Catalog on Direct-Industry. There are more story.
|
|
|
|
|
|
The KM6 Caseframe is designed for applications that require the mounting / housing of Eurocard-style electronics (cards or modules) in either a 19” rackmount or desktop formfactor. A step up from a standard subrack, its design requires no external housing, and offers optional EMC protection along with the integration of cooling fans and power supplies in a self contained, attractive unit. A range of accessories are available including Tilt Feet, Carry Handles, Fan Trays and Hinged Front / Rear Covers, allowing the requirements of many applications to be met with standard off-the shelf parts. The use of standard KM6 subrack components means that the KM6 Caseframe can accept most accessories from our KM6-II product range, including, for example, card guides, front panels and plug-in units. The top and bottom covers are easily removed for system building and servicing requirements.
Accessories A wide range of accessories support our four main subrack families. The majority of items are compatible with all platforms; each subrack variant also has its own dedicated range of support products.
* Plug-in modules and front panels
* Card Guides
* Divider kits
* Top and bottom covers
* Thermal management products
|
|
DIN rail case 420 for PCB size 100mm x 160mm
DIN rail case 420 for PCB size 100mm x 220mm
|
|
|
|
|
|
DIDO-S distribution boards are available in two types: surface mounted and flush mounted boards.
Particular attention has been set to the need to give more space in the inside in order to facilitate the operations of
wiring therfore favoring the simplicity of instalation.
PE4, PE8 and PE12 boards have a particular system to fix the DIN rail; it allows to regulate its height in two positions, an
inner and an outer.
Some Flush mounted boards (CMR) answering the demands of space saving products - more compact enclosures.
All distribution boards have DIN rail and brass terminal block (earth and neutral).
The particular structure of the lid, limits the board prominence from the wall of only 20 mm, creating a product of
discrete design and presence.
The interchangeability among the doors (transparent and opaque) and their reversibility together with the large
space for the assembling make these series very versatile.
Always careful to the demands of the clients, all products are protected with a thermo-retracable film.
|
|
|
|
|
|
FLUSH MOUNTING ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*PREMARKED MODULE COVERS, INTEGRATED ON THE FRAME.
*FRAME SEPARATED FROM DIN RAIL FOR CABLE CONNECTION AND INSTALLATION AFTER PAINTING.
*TRANSPARENT DOOR WITH LOCKING DEVICE ON OPENING.
*ENCLOSURES WITH MULTIPLE HORIZONTAL AND VERTICAL MODULAR COMBINATIONS BY MEANS TO ITEM GR11028.
*MARKED CE
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
SURFACE ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*REMOVABLE FLANGE TO SIMPLY SWITCH HOUSING AND WORK INSIDE THE DISTRIBUTION BOX.
*THE FLANGE ON THE INNER SIDE, NOT VISIBLE FROM THE OUTSIDE, IS PRE -CUT FOR ALL STANDARD TUBE AND CABLE-TRAY DIMENSION.
*THE DIN PROFILE FOR HOUSING THE SWITCHES IS HIGHER OFF THE BOTTOM TO PERMIT ALL TYPES OF WIRING WITHOUT ANY SPACE PROBLEMS.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*IN COMPLIANCE WITH CEI 23-48 -I ED.1995 PRODUCTS MEETING ESSENTIAL REQUIREMENTS OF L.V.D. 73/23/EEC AND FURTHER AMMENDMENTS ( IEC 760 2 ED 1989, AM 1/1994 AND MODIFICATIONS PR. EN60670 )
*MARKED CE AND IMQ.
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
|
|
|
|
|
|
The Tern Way 800 pan assembly has been designed for easy installation, ideal for switchboard manufacturers and a wide range of specifications. A short time withstand rating of 35kA or 5()kA for I second makes this assembly one of the most versatile on the market. Busbar raiings are available at 800A and 1250A.
Key Features
• Busbar assembly and MCCBs manufactured in U.K.
• Fully shrouded busbars.
• Four possible frame sizes for outgoing MCCBs.
• Shrouding to IP20 protection.
• Terminal covers available for both line and load side terminals. (line side fitted as standard).
• All MCCBs are padlockable in both ON and OFF position.
• Easy connection onto assembly.
Specification
Manufactured in accordance with BS 5486 Part 1 (1990)/ EN 60 439-1 (1990). Busbar ratings 800 Amps and 1250 Amps. Fully tested for both 35kA and 50kA short lime withstand for 1 second. 6. 12 and IS triple pole versions which accept outgoing MCCBs from 125A frame size single pole to 250A frame size triple pole. 3 way triple pole version which accepts outgoing 400A frame size triple pole MCCBs.
|
|
|
A range of truly versatile MCB distribution board systems providing unobtrusive final circuit management solutions for applications up to 200A. The range offers robust TP&N and SP&N distribution boards with an extensive selection of MCBs, RCBOs, RCCBs, switch disconnectors, MCCBs, fuse switch incomers, service centres and modular control and command devices.
|
|
Meets a large numbres of installation needs in industrial and similar premises. With a modern and attractive design it blends well into any seetting.
In version IP66, the DOMINO Systems offers a complete range of consumer units and sealed mounted enclosures for distribution assemblies. They are extremely flexible in the ways they can be used and may also be englarged
|
|
|
|
|
|
This chapter illustrates the technical characteristics of FM enclosures for distribution
boards and of ILME industrial socket-outlets for which these enclosures are
designed.
It is possible to use SQ interlocked socket-outlets for industrial use (with or without
protection devices), simple flush-mounting Pluso socket-outlets (without interlock)
and compartments for modular units.
These components enable to configure a wide range of distribution boards, both
mass-produced (AS) and custom-made (ANS), suitable to meet all possible installation
needs.
FM enclosures for distribution boards offer tested reliability and can be used, in combination
with FM socket-outlets for industrial use, as integrated modular systems to
configure distribution boards for industrial socket-outlets. Distribution boards with
ILME enclosures and socket-outlets can be installed in:
- Industrial applications
- Services applications (commercial, exhibitions, etc.)
- Agricultural and livestock breeding applications
- Residential and similar applications (i.e. common areas of condominiums, cellars,
garages, community buildings, kitchens, etc.).
|
|
Meets a large numbres of installation needs in industrial and similar premises. With a modern and attractive design it blends well into any seetting.
In version IP66, the DOMINO Systems offers a complete range of consumer units and sealed mounted enclosures for distribution assemblies. They are extremely flexible in the ways they can be used and may also be englarged.
|
|
|
GE's multipurpose enclosure range for indoor and outdoor applications has the answer when you're in need for permanent and safe protection of electrical and electronic equipment.
|
|
Functionality and safety for the built-in electronics.
Variability and the best possible adaptation to individual electronics are the key features offered by ROSE electronic enclosures. The three product lines provide the best possible protection in all applications.
Multitronic - PCB enclosures in many different designs
Profitronic - Profile enclosures for sophisticated electronics that can be used both indoors and outdoors
Wavetronic - Desktop enclosures for lab and instrumentation technology, variable in height
NoVoTronic - Aluminium profile enclosure system in 3 sizes. For data collection, PC, measurement and control technology.
|
|
Explosion-proof boxes
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
Switch and control systems
- Electric switch and control systems
- Marshalling and distribution panels
- Electrical switch panels in accordance with national and international standards
- Special cabinets (steel, stainless steel, aluminum) for instrumentation, control and electro-technics and for use in hazardous areas
BARTEC BENKE designs and manufactures control system solutions for automation of machines and processes.
|
|
The robust junction boxes made of plastic stainless steel and light alloy are featured by their friendly mounting and installation capability and their design.
They are fitted with pillar terminals for cable of up to 6 mm2. The practical orientated housing form allows for a problem-free access to the connection
terminals for installation.
|
|
BERNSTEIN aluminium enclosures are
ideally suited to housing electrical,
electronic or pneumatic components.
Their high mechanical strength ensures
excellent protection against impact and all
sizes are sealed to IP 65, according to
IEC 529.
|
|
|
Vibra-metrics offers a full line of six through 48 channel NEMA 4 vibration sensor switchboxes which allow safe and speedy data collection in dangerous or inconvenient areas. Since probes are mounted permanently, more repeatable and useful data is gathered, improving your PdM process.
|
|
|
Slimline WallBox is a low profile 2.5U x 19” enclosure suited for telecom / datacom networking applications where equipment can be mounted vertically to overcome space restrictions. Options include various cable entry gland configurations and key locks.
|
|
|
|
|
|
AUTOMELEC proposes a complete pallet of services for the realization of boxes of electronics and automatism.
These services can go from the design until the realization of the tests:
- Analysis of the needs
- Choice of the components and establishment of the nomenclature
- Provisioning of the components constitutive of the box: wrap mechanical, components of automatism (driving disconnecting switches, protections, departures, relay and contactors, relays of safety, automats programmable, variable speed transmission, connecting terminals, etc...)
- Realization of the electric file with a producing software of CAM of the plans to the format dxf or dwg compatible with all the software of CAM
- Realization of the box installation of and machining
- Wiring in the respect of the standards and according to the specific rules of the customer (color of wire according to tension, type of connecting terminals, etc...)
- Classification and reference mark of all wire
- Realization of the beam of cables external with choice and provisioning of the cables, the sensors (end of the road, detectors inductive, capacitive, optical cells, etc...)
- Realization of the programs automats
- Tests under tension and validation of the functions
|
|
|
Km-Gehäusetech is a product group within Richard WÖhr GmbH and developed by assumption of the Km-Gehäusetech GmbH & CO. Kg, Villingen Schwenningen, by Richard Wöhr GmbH in yards. The product range covers a variety to standard and customized plastic and aluminum housings, which lead in combination with Foientastaturen, electronic construction units and refined accessories to intelligent, custom-made solutions.
|
|
|
Electric steel boxes, with reversible frontal door and basic panel 20/10, meeting the standard INTO 60439-1, protection IP 55, also provided with transparent door and screen-door, dimensions of 300x200x150mm with 1200x800x300mm
|
|
|
Boxes polyester: dimensions of 300x250x160mm with 600x500x250mm, carries full or transparent, accessories (platinum of assembly, handles, locks, mural feet mounting,...), sealing IP65, great impact resistance (reinforced glass fibers), electric boxes
|
|
|
|
